Special features
IP30Protection Class IIPlastic housing with Wi-Fi door, white (RAL 9016)Note: To obtain protection class II, all devices installed on the mounting plate must be of the fully insulated type.
Type
Basic deviceInstallation distribution boardsKLV multimedia WIFI
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
650 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
10.9.3 Impulse withstand voltage
10.9.4 Testing of enclosures made of insulating material
Meets the product standard's requirements.
Fitted with:
Nail lugs
2x single-way socket outlet
Spirit level for leveling
Device support rails
Microperforated mounting plate
Installation instructions
3D adjustment element for mounting designed to adjust the mounting depth by up to 18 mm
WIFI Door/Frame
Device holder
Wall trough
Cable retainer
Cable entry postion
Cable entries on top and bottom, side, back plate
Heat diss. ambient 35°C delta T:20°C flush mount individ. encl. top(IEC 60890)
Heat diss. ambient 35°C delta T:35°C flush mount individ. encl. top(IEC 60890)
Ambient operating temperature details
Color
White
Traffic white (RAL 9016)
Frequency rating of contacts
Number of module space units per row
Protective shrouding material
Without shroud for protection against accidental contact
Material
Sheet steel, powder-coated
Steel plate/plastic
Polystyren (plastic)
Mounting method
DIN-compatible
DIN-rail
Flush mounting
Flush mounted (plaster)
Number of cores (dual) - max
Number of mountable connection strips