G38910052230 CARLO GAVAZZI Generador de canales Dupline® con la función de un Modbus/TPC esclavo

Dupline® Field- and Installationbus Dupline® Ethernet Modbus/TCP Gateway Type G 3891 0052
Du line®
Fieldbus Installationbus
• Built-in Dupline® channel generator
• Modbus/TCP Slave
• 10 and 100 Mbit operation, full or half duplex
• Twisted pair cables
• Read/control 128 Dupline® inputs/outputs
• Split-I/O mode selectable (128 inputs and 128 outputs)
• Support of 3 1/2 digit BCD and AnaLink analog formats
• For mounting on DIN-rail (EN 50 022)
• LED indicators for supply, Dupline® carrier and fault
• LED indicators for Ethernet link, module status and activity
• AC power supply
Product Description Ordering Key
G 3891 0052 230
Dupline® Channel Generator with the function of an Ether- net Modbus/TCP slave. This means that digital as well as analog Dupline® I/O’s can be read/controlled from Mod-
Type Selection
bus/TCP masters (PC’s, PLC’s etc.). The unit supports both Analink and Multiplexed ana- log signals. Several Dupline® gateways can be connected to the same Ethernet network.
Type: Dupline® H8-Housing Type no. Supply
Supply Ordering no.
115/230 VAC G 3891 0052 230
Input/Output Specifications
Ethernet
Protocol Modbus/TCP Connector RJ45 (standard) Communication Speed 10 or 100 Mbit operation
IP address setting via DIP-switches or PC (arp command)
Dielectric voltage
Ethernet – Dupline® ≥ 4 kVAC (rms)
Dupline®
Output voltage 8.2 V Output current ≤ 100 mA Short-circuit protection Yes
All channels ON detector Yes
Output impedance ≤ 15 Ω
Sequence time 132.3 ms (@ 128 channels)
Adjustments
1 x 16 pos. rotary switch No. of Dupline® channels
8 .. 128 in steps of 8
DIP-switch 1 Dupline® mode (Normal/Split I/O) DIP-switch 2 Dupline® analog
DIP-switch 3 Analog input protocol DIP-switch 4 Analog output protocol DIP-switch 5-12 IP address
CE-marking Yes
Specifications are subject to change without notice (21.08.2006) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group