TBS Transient and lightning protection systems - OBO BETTERMANN

5093533

V50-3+NPE+FS-280

-

ARRESTER 1+2 V50-3+NPE+FS-280

Combination arrester V50, 3-pole + NPE with FS 280 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5081977

RJ11-TELE 4-F

-

DATA PROTECTION RJ45-TELE 4-C

Fine RJ11-TELE 4-F protection, for 170V analog phones,

TELE 4-F thin protection device for ISDN RJ11. Data line protection device for analogue telecommunication systems• In aluminium housing • With two-stage protection circuit• Easy installation• Incl. 150 mm connection cable with RJ11 or RJ45 connectors• Bandwidth optimised for telecommunication systems• DIN rail mounting with DLS-BS accessory (5082 38 2)Application: Analogue telecommunication systems• In aluminium housing • Easy mounting on symmetrical rail or terminal equipment• Incl. 150 mm connection cable with RJ411 connectors• Bandwidth optimised for telecommunication systems

5081975

RJ11-TELE 4-C

-

DATA PROTECTION RJ11-TELE 4-F

Combination protection device TELE 4-C for ISDN RJ11. Data line protection device for analogue telecommunications systems • In aluminium housing • With 2-stage protection circuit • Simple mounting• Incl. 150 mm connection cable with RJ11 and/or RJ45 connectors• Optimised bandwidth for TC systems• DIN rail mounting with DLS-BS accessories (5082 38 2)Application: For analogue telecommunication systems• In aluminium housing • Simple mounting on hat rail or on terminal• Incl. 150 mm connection cable with RJ411 connectors• Optimised bandwidth for telecommunications systems

5402958

101 B2-16 M16

-

BASE CONCRETE 101 B2-16 M16

Concrete base min. 16 kg with female thread. • Weight min. 16 kg• Frost-resistant concrete• Female thread M16• Recommended air-termination rod length max. 3.0 m, depending on wind load zone

5408976

101 3-ES-16

-

SET ISO-COMBI SET TRIANGUL

Insulated lightning protection set, 3-corner fastening. 3-corner fastening for an insulated air-termination unit at the separating distance s.• Mounting on walls and roof structures with two fastening plates • For maintenance of the separation distance to electrically conductive partsaccording to VDE 0185-305-3 (IEC 62305-3)• Acceptance of air-termination rods and round conductors with 8, 16 and 20 mm diameter• UV-resistant and weatherproof• Continuous temperature range -50 °C to +100°C• Material factor km = 0.7

5095173

V20-3-320

-

DOWNLOADER T. 2 V20-3-320

5095171

V20-1-320

-

DOWNLOADER T. 2 V20-1-320

Surge arrester V20, 1-pole, 320 V. Surge arrester, type 2• For surge voltage protection equipotential bonding to VDE 0100-443 (IEC 60364-4-44)• Discharge capacity to 40 kA (8/20) per pole through high-performance varistors • Modular connectable arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling variants (FS) have a potential-free changeover contact for remote signallingApplication: Equipotential bonding in main and sub-distributions.

5098452

MDP-4 D-48-EX

-

DOWNLOADER-EX MDP-4 D-48-EX

Series protection device, 4-pole, 48 V version. Lightning barrier for intrinsically safe measuring circuits • Protection device for multi-wire systems• Direct shield earthing and screwless connection terminals• Space-saving width of just 8.7 mm • High frequency range of 0‒100 MHz• ATEX approval: II 2(1) G Ex ia [ia Ga] IIC T4 (BVS 11 ATEX E 131 X)• UL-listed (4UM2)Application: Universal use on 35 mm DIN profile rail in any standard distribution housing.

5093594

VG-V50-1+NPE-280

-

DESCRG. 1+2 V50-1+NPE-280 N/BOX

Combination arrester V50, 1-pole + NPE 280 V. Lightning current combination arrester, type 1+2 to DIN EN 61643-11 • For lightning protection equipotential bonding to VDE 0185-305 (IEC 62305)• Complete unit, pre-mounted and ready for connection in polycarbonate housing (IP66)• Lightning current arresting capacity 12.5 kA (10/350) per pole and up to 50 kA (10/350) in totalApplication: Lightning protection equipotential bonding for buildings of Class III and IV.If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary!* Complete = upper part and base

5093592

V50-3+NPE+FS-385

-

ARRESTER 1+2 V50-3+NPE+FS-385

5093590

V50-1+NPE+FS-385

-

ARRESTER 1+2 V50-1+NPE+FS-385

Combination arrester V50, 1-pole + NPE with FS 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5021239

RD 10-V2A

-

STAINLESS STEEL CABLE RD 10/V2A 80M

Round conductor, stainless steel A2. • Can be used as a conductor according to DIN EN 62561-2 (VDE 0185-561-2)• Corresponds to the requirements of VDE 0185-305 (IEC 62305)• RD 10-V4A for applications in the earth• According to the foundation earth electrode standard DIN 18014, V4A is required in the earth

5082434

KOAX B-E2 FF-F

-

PROTECTION COAXIAL TV 4+1

Data cable protection device for coaxial TV/camera systems. Data cable protection device for coaxial TV/camera systems• In aluminium housing • BNC connector socket/socket• Simple mounting with adapter plug • Two-stage protection circuit • DIN rail mounting with DLS-BS accessories (5082 38 2)Application: Protection of CCTV, video signals; cameras and/or TV systems• Usable in CCTV and diverse TV systems• Optimised transmission properties • Can be locked onto hat profile rail• Simple connection technology

5082432

KOAX B-E2 MF-F

-

COAXIAL PROTECTION KoaxB-E2 FF-F

Fine protection for 10Base2-/10Base5 networks. Data line protection device for coaxial Ethernet network systems • In aluminium housing • BNC connector m/f• Simple mounting with adapter plug• Two-stage protection circuit • DIN rail mounting with DLS-BS accessories (5082 38 2)Application: Protecting video signals; cameras and/or CCTV units, Cheapernet, 10BASE2, 10BASE5• In aluminium housing • BNC connector for Cheapernet, 10BASE2 • Simple mounting with adapter connector• Two-stage protection circuit

5093440

V50-1-150

-

ARRESTER 1+2 V50-1-150

5093572

V50-1-385

-

ARRESTER 1+2 V50-1-385

Combination arrester V50, 1-pole 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093574

V50-3-385

-

ARRESTER 1+2 V50-3-385

5093578

V50-1+FS-385

-

ARRESTER 1+2 V50-1+FS-385

Combination arrester V50, 1-pole with FS 385 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093448

V50-3+FS-150

-

ARRESTER 1+2 V50-3+FS-150

Combination arrester V50, 3-pole with FS 150 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5081990

RJ45 S-ATM 8-F

-

DATA PROTECTION RJ45 S-ATM8-IND

Fine protection 8-F for Ethernet networks (Class D/CAT 5). Universal data cable protection device for network technology and telecommunication systems • In aluminium housing • Protection for 8 cores • With two-stage protective circuit • Simple mounting• With RJ45 Western connector• Incl. 150 mm connection cable with RJ45 connectors• Cat 5e network technology, 10BaseT, 100BaseT, 1000BaseT• DIN rail mounting with accessories DLS-BS (5082 38 2)Application: For analogue, ISDN, DSL systems, Ethernet Twisted Pair.• Usable in networks of Class D or CAT 5e• Can be locked onto DIN profile rails or mounted directly at the terminal• Simple installation using RJ45 connection technology• Optimised transmission properties

5081992

5081992

-

PROTECTION DATA DLS-BS

5311713

249 B ALU

-

QUICK CONNECTOR 249 B ALU

Vario quick connector ALU. • For T, cross and parallel connectors• Quick installation using hexagonal bolt M10 x 30, high-grade stainless steel• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)

5093552

V50-1+NPE-320

-

ARRESTER 1+2 V50-1+NPE-320

5093554

V50-3+NPE-320

-

ARRESTER 1+2 V50-3+NPE-320

Combination arrester V50, 3-pole + NPE 320 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5331017

853 400

-

CABLE BRIDGING 853 400

Bridging cable. • With aluminium cable lugs• From flexible copper cable 16 mm²• Coating: Black, chlorinated EM5 natural rubber mixture• With 1 fastening hole Ø 10.5 mm per attachment side• With 2 fastening holes Ø 6.5 mm per attachment side• Suitable for applications outside or inside• Temperature range –25 °C to +80 °C (moved) and –40 °C to +80 °C (not moved)• UV-resistant

5403333

F-Fix-132-300

-

TIP COLLECTOR F-FIX-132-300

Air-termination rod holder for ridge tiles. Rod holder for ridge tiles, for simple, quick and safe fastening of Ø 16 mm air-termination rods• System consisting of holder made of V2A stainless steel and aluminium air-termination rods• Quick and easy mounting thanks to pre-mounted air-termination rod• Air-termination rod length: 1,000 mm• Width adjustable between 180−260 mm• Spacing of the ridge holders: 110 mm (5403330)• Spacing of the ridge holders: 300 mm (5403333)Application: To protect roof structures such as photovoltaic and TV/SAT systems.

5093454

V50-3+NPE-150

-

ARRESTER 1+2 V50-3+NPE-150

Combination arrester V50, 3-pole + NPE 150 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5093452

V50-1+NPE-150

-

ARRESTER 1+2 V50-1+NPE-150

Combined discharger V50 V50-1+NPE-150.1 pole with NPE 150V Polyamide, PA,

5093531

V50-1+NPE+FS-280

-

ARRESTER 1+2 V50-1+NPE+FS-280

Combination arrester V50, 1-pole + NPE with FS 280 V. Lightning current combination arrester, type 1+2• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total• Modular, plug-in arrester with cut-off unit and visual status display • Locking mechanism with vibration protection and voltage keying • Plastic to UL 94 V-0• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lightning current equipotential bonding for buildings of class III and IV.* Complete = Plug-in arrester and base

5408006

isCon Pro+ 75 SW

-

DERIVATION isCon 750 SW (250M)

isCon® conductor, Professional plus black. Please refer to the mounting instructions for information on routing the OBO isCon® conductor.• Highly voltage-resistant, insulated conductor• Floating discharge-free• Additional mechanical protection (black protective jacket)• For maintenance of the separation distance according to IEC 62305 (VDE 0185-305-3)• Tested according to IEC/EN 62561-1 (VDE 0185-561-1) with H1/150 kA• Equivalent separation distance se ≤ 0.75 m (air) and se ≤ 1.5 (solid material)• Tested according to IEC TS 62561-8 (VDE V 0185-561-8)• Halogen-free• Fire load 4.3 kWh/m• Can be used in potentially explosive areas Ex zone 1/2 and 21/22 when taking the current mounting instructions into account