Trabtech (TT)

1011977

TTC-EX-PP

-

Separating plate

Spacer plate for NS-35/7.5 rails to ensure the 50 mm wire dimension between the remote warning module and surge protection in TTC-EX systems.

Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the remote signaling module and surge protection in TTC-EX systems.

1027591

TTC-6P-T3-24DC-I-P

-

Type 3 surge protection plug

Replacement connector for type 3 surge protection from the TERMITRAB complete T3 product series. Nominal voltage 24 V.

1032207

FLT-SEC-ZP-3S-255/12,5

-

Combination type 1/2 protective device

Lightning current arrester, according to type 1/class I, for three-phase power supply networks with separate N and PE (L1, L2, L3, PE, N). For the equipotential lightning protection connection according to lightning protection class III and IV. For mounting on 40 mm busbar systems.

1033708

VAL-MS 1500DC-PV/2+V

-

Type 2 surge arrester

Surge charger for isolated direct current systems of 1500 V DC and 2 poles, for rail mounting, 3-pole base element, three plug-in protection elements with temperature control, status signaling in each connector.

1033725

VAL-MS 1500DC-PV/2+V-FM

-

Type 2 surge arrester

Surge charger for isolated direct current systems of 1500 V DC and 2 poles, for rail mounting, 3-pole base element with remote indication contact, three plug-in protection elements with temperature control, status signaling on each connector.

1033727

VAL-MS 1500DC-PV-ST

-

Type 2 surge protection plug

Spare plug-in protection in 3-unit package for COMBINATIONS of PV dischargers from the VAL-MS 1500DC-PV product line-...

1033788

VAL-SEC-T2-2+F-120DC-FM

-

Svodič přepětí typu 2

Plug-in surge arrester without leakage current for isolated and grounded 2-pole DC systems with linear operating characteristics up to 120 V DC, for rail mounting, 3-pole base element with remote indication contact, three plug-in protection elements with temperature control, status signaling on each connector.

1033789

VAL-SEC-T2-2+F-220DC-FM

-

Type 2 surge arrester

Plug-in surge arrester without leakage current for isolated and grounded 2-pole DC systems with linear operating characteristics up to 220 V DC, for rail mounting, 3-pole base element with remote indication contact, three plug-in protection elements with temperature control, status signaling on each connector.

1033790

VAL-SEC-T2-2+F-380DC-FM

-

Type 2 surge arrester

Plug-in surge arrester without leakage current for isolated and grounded 2-pole DC systems with linear operating characteristics up to 380 V DC, for rail mounting, 3-pole base element with remote indication contact, three plug-in protection elements with temperature control, status signaling on each connector.

1035864

VAL-MS-BE-PCB-FM

-

Surge protection base element - VAL-MS-BE-PCB-FM - 1035864

Single-channel socket element for VAL-MS series surge protection devices type I and type II, for isolated and grounded voltage systems up to 1500 V DC and 690 V AC, for compact installation on printed circuit board, with integrated remote indication contact

1038842

BLT-SKT-230-A

-

Type 3 surge protection device

Type 3 surge protection for fixed installation mounting on sockets with protective contact. Temperature-controlled circuit, acoustic defect indication.

1044182

VAL-MS-T1/T2 1000DC-PV/3+V-FM/32

VAL-MS-T1/T2 1000DC-PV/3+V-FM/32

Lightning/surge arrester type 1/2 - VAL-MS-T1/T2 1000DC-PV/3+V-FM/ - 1044182

Lightning surge / current protection device for isolated and grounded 2-pole photovoltaic 1000V DC direct current systems, for rail mounting, 4-pole base element with remote indication contact, four plug-in protection elements with temperature control, status message on each male connector.

1044386

FLT-SEC-T1+T2-3IT-350/25-FM

-

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for three-phase power supply networks with separate N and PE (L1, L2, L3, N, PE).

1044388

FLT-SEC-T1+T2-2IT-350/25-FM

-

Type 1+2 protective device combination

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for two-phase power supply networks with isolated operation (L1, L2, PE).

1050280

VAL-MS 350 VF-RW ST

-

Type 2 surge protection plug

Plug-in type 2 surge protection with varistor series connection and gas-filled arc arrester for VAL-MS base element, with thermal control, optical fault indication. Version: 350 V AC with increased lightning current shunt capability.

1050283

VAL-MS 320 RW ST

-

Type 2 surge protection plug

Plug-in type 2 surge protection with high-power varistor for VAL-MS base element, with thermal control, optical fault indication. Version: 320 V AC with increased lightning current shunt capability.

1050284

VAL-MS 350 VF-RW/3+0-FM/40

-

Type 2 surge arrester

Plug-in leakage current proof surge arrester with increased lightning current shunt capability, for three-phase power supply networks, with N and PE in a common conductor (4-conductor system: L1, L2,L3, PEN), with remote indication contact.

1052632

VAL-SEC-T2-GDT-400DC-P

-

Type 2 surge protection plug

Replacement connector for surge protection device from the VALVETRAB SEC product line for DC power sources. Ground the path for 48 and 120 V DC.

Replacement connectors for VALVETRAB SEC series surge arresters for DC power sources. Protection of the range to earth for 48 and 120 V DC.

1065864

VAL-MS-T1/T2 3+1-BE/FM/10

-

Type 2 surge protection base element

Base element for type 2 unloaders from the VALVETRAB MS product series, with remote indication contact. Execution for three-phase power supplies with separate N and PE conduction.

1074741

FLT-SEC-ZP-3S-255/7,5

-

Combination type 1/2 protective device

Lightning current charger, according to type 1/class I, for three-phase power supply networks with separate N and PE (L1, L2, L3, PE, N). Suitable for equipotential connection in installations without external lightning protection with and without overhead line power. For mounting on 40 mm busbar systems.

2800763

D-LAN-CAT.5-HC

-

Surge protection device

Surge protection for data networks up to 1 GBit/s. Use on Ethernet, Power over Ethernet (PoE, Mode A and Mode B), Token Ring, ISDN and DS1. RJ45 adapter with separate grounding line and fixing foot for DIN NS 35 rail.

2906807

TTC-6-2XTVSD-12DC-PT

-

Fine surge protection for two signal wires with common reference potential.

Fine surge protection for two signal conductors with common reference potential.

Fine surge protection for two signal wires with common reference potential.

2907831

TTC-6P-1X2-EX-24DC-I-P

-

Surge protection plug with integrated status indicator on the module for one 2-wire floating Ex i signal circuit. Nominal voltage: 24 V DC

Pluggable surge protection with status indicator integrated into the module for a potential-free 2-wire intrinsically safe signal circuit. Rated voltage: 24 V DC

Surge protection plug with integrated status indicator on the module for one 2-wire floating Ex i signal circuit. Nominal voltage: 24 V DC

2907832

TTC-6P-2X1-EX-24DC-I-P

-

Surge protection plug with integrated status indicator for one 2-wire Ex i signal circuit with common reference potential. Nominal voltage: 24 V DC

Plug-in surge protection with integrated status indicator for a 2-wire intrinsically safe signal circuit with common reference potential. Rated voltage: 24 V DC

Surge protection plug with integrated status indicator for one 2-wire Ex i signal circuit with common reference potential. Nominal voltage: 24 V DC

2907833

TTC-6P-3-HF-EX-12DC-I-P

-

Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 12 V DC

Plug-in surge protection with integrated status indicator for a 3-wire intrinsically safe signal circuit with common reference potential. For high-frequency applications. Rated voltage: 12 V DC

Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 12 V DC

2907834

TTC-6P-3-HF-EX-24DC-I-P

-

Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 24 V DC

Plug-in surge protection with integrated status indicator for a 3-wire intrinsically safe signal circuit with common reference potential. For high-frequency applications. Rated voltage: 24 V DC

Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 24 V DC

2907839

TTC-6P-1X2-12DC-I-P

-

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V  DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 12 V DC

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 12 V  DC

2907840

TTC-6P-1X2-24DC-I-P

-

Protección enchufable contra sobretensiones con indicador de estado integrado en el módulo para un circuito de señales de 2 hilos libre de potencial. Tensión nominal: 24 V DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 24 V DC

Protección enchufable contra sobretensiones con indicador de estado integrado en el módulo para un circuito de señales de 2 hilos libre de potencial. Tensión nominal: 24 V DC

2907841

TTC-6P-1X2-48DC-I-P

-

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 48 V  DC

Plug-in surge protection with status indicator integrated into the module for a potential-free 2-wire signal circuit. Rated voltage: 48 V DC

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 48 V  DC

2907842

TTC-6P-2X1-12DC-I-P

-

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 12 V  DC

Pluggable surge protection with status indicator integrated into the module for two signal conductors with common reference potential. Rated voltage: 12 V DC

Surge protection plug with integrated status indicator on the module for two signal wires with a common reference potential. Nominal voltage: 12 V  DC