info@electricautomationnetwork.comEuropa+34 960 640071USA+1 305 4472905

SIEMENSSENSORS AND COMMUNICATIONS

SENSORS AND COMMUNICATIONS

Sensors and communications form the nervous system of any modern industrial automation setup. These components include proximity sensors, photoelectric sensors, inductive sensors, capacitive sensors, ultrasonic sensors, and communication modules like fieldbus couplers, Ethernet switches, and serial converters. Key technical specs to consider are...

Subcategories

POWER SUPPLIES

SITOP CONNECTION

SITRANS P - PRESSURE TRANSMITTERS

SITRANS T - TEMPERATURE SENSORS AND TRANSMITTERS

SIPART POSITIONERS AND PROCESS CONTROLLERS

SIWAREX WEIGHING SYSTEMS

ULTRASONIC LEVEL MEASUREMENT EQUIPMENT

NON-ULTRASONIC LEVEL MEASURING EQUIPMENT

MAGNETIC, MASS AND ULTRASONIC FLOW METERS

VORTEX FLOWMETERS

DIGITAL CONNECTIVITY

SITOP SMART

SITOP BASIC

SITOP DC UPS

SITOP: CUSTOMIZED SOLUTIONS

SITOP: ADD-ON MODULES

SIMATIC S7-300 SV / S7-1500 DV

SIMATIC S7-1200 DV / ET 200

SIMATIC TOP CONNECT

SITOP DIRECT MOUNT

SITOP PSU6200

SITOP ADVANCED COMMUNICATION

IE / PB: STANDARD CABLES AND CONNECTORS

IE / PB / FO: SPECIAL CABLES AND CONNECTORS

SCALANCE: ENTRY-LEVEL SWITCHES

SIMATIC PLC: COMMUNICATION PROCESSORS FOR MICROCONTROLLERS

SIMATIC PLC: COMMUNICATION PROCESSORS

SIMATIC NET: PC COMMUNICATION PROCESSORS

SIMATIC NET SOFTWARE

MI INSTRUMENTATION: CANCELLATIONS

SITRANS FM DC

SITRANS FM DC: BATTERY-POWERED

SITRANS FM AC

SITRANS FC: ANALOG RANGE

SITRANS FC: DIGITAL RANGE

SITRANS FS

SITRANS FS: CLAMP-ON MOUNTING

SITRANS FX

SITRANS FR / FVA / FM BASIC

SITRANS LU

SITRANS LR

SITRANS LC

SITRANS LG

SITRANS LPS / LVL / LVS / RD / LT

SITRANS P3X0 / P4X0 AND ACCESSORIES

SITRANS P: REMOTE SEALS

SITRANS P2XX / P300 AND ACCESSORIES

WEIGHING AND PROCESS PROTECTION

SIPART DR / SIREC: CONTROL AND DIGITAL RECORDING

SITRANS TT

SITRANS TS

SIPART PS

SIPART PS100

DYNAMIC SCALES AND ACCESSORIES

SIWAREX: WEIGHING ELECTRONICS

LOAD CELLS AND ACCESSORIES

SITOP ADVANCED

Sort by

Manufacturer code

Reference

Catalog number

Description

Delivery

Price

6DR5113-0NP22-0BA1 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-act..

SIEMENS

Manufacturer Code: 6DR5113-0NP22-0BA16DR5113-0NP22-0BA1

Reference: 6DR5113-0NP22-0BA16DR5113-0NP22-0BA1

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5010-0NP32-0AA1 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, p..

SIEMENS

Manufacturer Code: 6DR5010-0NP32-0AA16DR5010-0NP32-0AA1

Reference: 6DR5010-0NP32-0AA16DR5010-0NP32-0AA1

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5020-0EM23-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, p..

SIEMENS

Manufacturer Code: 6DR5020-0EM23-0AA06DR5020-0EM23-0AA0

Reference: 6DR5020-0EM23-0AA06DR5020-0EM23-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

A5E00102775 SIEMENS SITRANS F M Transmag 2 Op Instr En

SIEMENS

Manufacturer Code: A5E00102775A5E00102775

Reference: A5E00102775A5E00102775

Catalog Number: --

SITRANS F M Transmag 2 Op Instr En

Delivery: See availabilitySee availability

7ML5432-0BH20-1AE0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5432-0BH20-1AE07ML5432-0BH20-1AE0

Reference: 7ML5432-0BH20-1AE07ML5432-0BH20-1AE0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 4" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable inlets): Aluminum, 2 X M20 x 1.5 Antenna Lens Material: TFM 1600 Flush lens Approvals: Increased Safety/Non Sparking: ATEX II 3G Ex ec IIC T4 Gc; UKEX II 3G Ex ec IIC T4 Gc; EAC Ex 2Ex nA IIC T4 Gc X; CE, UKCA, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, Process Connection: Stainless Steel 1.4404/1.4435 Flanged Process Connection Types (1.4404/1.4435 Stainless Steel): 4" ASME B16.5 Class 150 with Accent Communications: 4...20mA HART, <3.6mA Start - Box (with Cable Entry): Aluminum, 2 X M20 x 1.5 Lens Material (Antenna): TFM 1600 Recessed Lens Approvals: Increased Safety / Non Sparking: ATEX II 3G Ex ec IIC T4 Gc; UKEX II 3G Ex ec IIC T4 Gc; EAC Ex 2Ex nA IIC T4 Gc X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7ML5440-1HB00-0BC1 SIEMENS SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-co..

SIEMENS

Manufacturer Code: 7ML5440-1HB00-0BC17ML5440-1HB00-0BC1

Reference: 7ML5440-1HB00-0BC17ML5440-1HB00-0BC1

Catalog Number: --

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, painted aluminum, with integral aimer Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, painted aluminum with integrated fixing flange Box (with cable entry): Stainless steel, 1 X M20 x 1.5 (includes plastic cable gland). Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Delivery: See availabilitySee availability

7MH7218-1AN52-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1AN52-17MH7218-1AN52-1

Reference: 7MH7218-1AN52-17MH7218-1AN52-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 30", 'A'= 39" (991 mm) Width's based on belt width: For use with 5" integrated round bar weight (30"-41", 63.2-79.6 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt Width and Measurement "A": 30", 'A' = 39" (991 mm) Width according to Belt Width: For use with integrated 5" round weight (30"-41", 63.2-79.6 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1BL63-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1BL63-17MH7218-1BL63-1

Reference: 7MH7218-1BL63-17MH7218-1BL63-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 49", 'A'= 58" (1473 mm) Width's based on belt width: For use with 6" integrated round bar weight (42"-53", 131.8-154.8 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and measurement "A": 49", 'A' = 58" (1473 mm) Width according to belt width: For use with integrated 6" round weight (42"-53", 131.8-154.8 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1DQ57-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1DQ57-17MH7218-1DQ57-1

Reference: 7MH7218-1DQ57-17MH7218-1DQ57-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 95", 'A'= 104" (2642 mm) Width's based on belt width: For use with 5" integrated round bar weight (90"-96", 214.6-229.7 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 95", 'A' = 104" (2642 mm) Width according to belt width: For use with integrated 5" round weight (90"-96", 214.6-229.7 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

A5E03461437 SIEMENS SITRANS FUE950 spare part: FUE950 combi. pulse module with 2 inputs and 1 output (7ME348..

SIEMENS

Manufacturer Code: A5E03461437A5E03461437

Reference: A5E03461437A5E03461437

Catalog Number: --

SITRANS FUE950 spare part: FUE950 combi. pulse module with 2 inputs and 1 output (7ME348 versions only).

Spare part for SITRANS FUE950: FUE950 pulse combination module, 2 inputs and 1 output (only for 7ME348 versions).

Delivery: See availabilitySee availability

7ML5745-1BD12-1DA0 SIEMENS SITRANS LVL100 Vibrating point level switch. Detects level and material in liquid..

SIEMENS

Manufacturer Code: 7ML5745-1BD12-1DA07ML5745-1BD12-1DA0

Reference: 7ML5745-1BD12-1DA07ML5745-1BD12-1DA0

Catalog Number: --

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: ordinary location, CE Version/Process Temperature: Extended -40 to 150 C Process connection: Thread R1 PN64, EN10226-1 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: M12x1 incl. 5 m cable / IP68(0.2bar) . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Without approvals Process temperature: Advanced -40 ... 150 C Thread R1 PN64, EN10226-1 / 316L electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: M12x1 incl. 5 m cable / IP68 (0.2 bar)

Delivery: See availabilitySee availability

7MF1575-1LB20 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-1LB207MF1575-1LB20

Reference: 7MF1575-1LB207MF1575-1LB20

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 316L (1.4404) Protective cap ETFE EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixedly mounted cable Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 316L (1.4404) ETFE EPDM protection cap (for drinking water) none

Delivery: See availabilitySee availability

7MF1575-3CB10 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-3CB107MF1575-3CB10

Reference: 7MF1575-3CB107MF1575-3CB10

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,3 bar Cable length: 10m Stainless steel 316L (1.4404) Protective cap ETFE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.3 bar Cable length: 10m Stainless steel 316L (1.4404) ETFE FKM protection cap (standard) none

Delivery: See availabilitySee availability

7MH7170-2BE20 SIEMENS Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft..

SIEMENS

Manufacturer Code: 7MH7170-2BE207MH7170-2BE20

Reference: 7MH7170-2BE207MH7170-2BE20

Catalog Number: --

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 24" / A= 29.6 ... 35.5" (750 ... 901 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 24" / A= 29.6 ... 35.5" (750 ... 901 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6"" nominal width)." No mounting piece. .

Delivery: See availabilitySee availability

7MH7170-2MD00 SIEMENS Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft..

SIEMENS

Manufacturer Code: 7MH7170-2MD007MH7170-2MD00

Reference: 7MH7170-2MD007MH7170-2MD00

Catalog Number: --

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) Finish: Epoxy painted Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Width of the ribbon / Dimension ""A"": 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) "Paint: Epoxy (only for 6" nominal width)." Mounting piece: Standard. .

Delivery: See availabilitySee availability

7MH7102-1EG40 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-1EG407MH7102-1EG40

Reference: 7MH7102-1EG407MH7102-1EG40

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 40 t/h max. design capacity Flowguide size: 8" ASME flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 40 t/h (44 STPH), max. rated capacity. Flow Guide Size: 8 inch, ASME Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 304 Stainless Steel (1.4301) .

Delivery: See availabilitySee availability

7MH7102-3EH70 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-3EH707MH7102-3EH70

Reference: 7MH7102-3EH707MH7102-3EH70

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: 8" ASME flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 8 inch, ASME Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 316 Stainless Steel (1.4401) .

Delivery: See availabilitySee availability

6DR5120-0NN33-0AA4 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-act..

SIEMENS

Manufacturer Code: 6DR5120-0NN33-0AA46DR5120-0NN33-0AA4

Reference: 6DR5120-0NN33-0AA46DR5120-0NN33-0AA4

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

6DR5323-0NG33-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-a..

SIEMENS

Manufacturer Code: 6DR5323-0NG33-0AA06DR5323-0NG33-0AA0

Reference: 6DR5323-0NG33-0AA06DR5323-0NG33-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5523-0EN11-0AA4 SIEMENS SIPART PS2 Smart, electropneumatic positioner, PROFIBUS PA, Ex/nEx, double-acting..

SIEMENS

Manufacturer Code: 6DR5523-0EN11-0AA46DR5523-0EN11-0AA4

Reference: 6DR5523-0EN11-0AA46DR5523-0EN11-0AA4

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, PROFIBUS PA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 fault indicator). " Analog Output Module (AOM), analog position feedback 4 ... 20 mA. Device plug M12 optionally orderable with -Z D53. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese.

SIPART PS2 Intelligent electro-pneumatic position controller, PROFIBUS PA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread the.: 1/2" NPT / pneumeter: 1/4" NPT Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 output of "fault warnings"). Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Order option with fixed connector M12 -Z D53. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

6DR5013-0EM22-0BA3 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, a..

SIEMENS

Manufacturer Code: 6DR5013-0EM22-0BA36DR5013-0EM22-0BA3

Reference: 6DR5013-0EM22-0BA36DR5013-0EM22-0BA3

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Neum.: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

6DR5013-0NM32-0AA3 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, a..

SIEMENS

Manufacturer Code: 6DR5013-0NM32-0AA36DR5013-0NM32-0AA3

Reference: 6DR5013-0NM32-0AA36DR5013-0NM32-0AA3

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

6DR5023-0EG22-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0EG22-0AA06DR5023-0EG22-0AA0

Reference: 6DR5023-0EG22-0AA06DR5023-0EG22-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5010-0EN22-0BA3 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, p..

SIEMENS

Manufacturer Code: 6DR5010-0EN22-0BA36DR5010-0EN22-0BA3

Reference: 6DR5010-0EN22-0BA36DR5010-0EN22-0BA3

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

7MH7218-1CH55-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1CH55-17MH7218-1CH55-1

Reference: 7MH7218-1CH55-17MH7218-1CH55-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 67", 'A'= 76" (1930 mm) Width's based on belt width: For use with 5" integrated round bar weight (66"-77", 154.0-181.8 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Actuation: Manual Belt Width and Measurement "A": 67", 'A' = 76" (1930 mm) Width according to Belt Width: For use with integrated 5" round weight (66"-77", 154.0-181.8 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7188-5UC00 SIEMENS Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7188-5UC007MH7188-5UC00

Reference: 7MH7188-5UC007MH7188-5UC00

Catalog Number: --

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2 400 mm / A= 101.9 ... 106.4" (2 588 ... 2 704 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 2 400 mm / H= 101.9 ... 106.4" (2 588 ... 2 704 mm) paint: 1.4401 stainless steel with corrosion-resistant material bearings mounting: standard

Delivery: See availabilitySee availability

7ML5433-2CB20-1AM0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5433-2CB20-1AM07ML5433-2CB20-1AM0

Reference: 7ML5433-2CB20-1AM07ML5433-2CB20-1AM0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404) DN80 Aseptic/Hygienic flanged to DIN 11864-2 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic flanged connection DN80 according to DIN 11864-2 Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Flamerproof: NEPSI Ex d ia mb IIC T4 Ga/Gb Ex iaD 20 T90 IP67 DIP A20 T A, 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7MH7723-1LE SIEMENS WF100 10" (250mm) sensing plate 316 PTFE

SIEMENS

Manufacturer Code: 7MH7723-1LE7MH7723-1LE

Reference: 7MH7723-1LE7MH7723-1LE

Catalog Number: --

WF100 10" (250mm) sensing plate 316 PTFE

WF100 Sensing Board 10" (250mm) 316 Steel PTFE Coating

Delivery: See availabilitySee availability

7MH7187-4JE00 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4JE007MH7187-4JE00

Reference: 7MH7187-4JE007MH7187-4JE00

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) paint: steel painted with corrosion-resistant material mounting bearing material: standard

Delivery: See availabilitySee availability

7MF1575-2BD21 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2BD217MF1575-2BD21

Reference: 7MF1575-2BD217MF1575-2BD21

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...6 ftH2O Cable length: 5m (15ft) Stainless steel 904L (1.4539) Protective cap PPE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...6 ftH2O Cable length: 5m (15ft) 904L stainless steel (1.4539) PPE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Delivery: See availabilitySee availability

7MF1575-2LE21 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2LE217MF1575-2LE21

Reference: 7MF1575-2LE217MF1575-2LE21

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...120 ftH2O Cable length: 50m (150ft) Stainless steel 904L (1.4539) Protective cap ETFE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...120 ftH2O Cable length: 50m (150ft) 904L stainless steel (1.4539) ETFE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Delivery: See availabilitySee availability

6DR5123-0NN23-0AA4 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-act..

SIEMENS

Manufacturer Code: 6DR5123-0NN23-0AA46DR5123-0NN23-0AA4

Reference: 6DR5123-0NN23-0AA46DR5123-0NN23-0AA4

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese.

SIPART PS2 Intelligent electro-pneumatic position controller, 4...20mA, HART, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

6DR5020-0NG33-0AA2 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, p..

SIEMENS

Manufacturer Code: 6DR5020-0NG33-0AA26DR5020-0NG33-0AA2

Reference: 6DR5020-0NG33-0AA26DR5020-0NG33-0AA2

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5023-0EP23-0AA2 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0EP23-0AA26DR5023-0EP23-0AA2

Reference: 6DR5023-0EP23-0AA26DR5023-0EP23-0AA2

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5023-0GM23-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0GM23-0BA06DR5023-0GM23-0BA0

Reference: 6DR5023-0GM23-0BA06DR5023-0GM23-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: M20x1.5 / Neum.: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5023-0NP22-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0NP22-0AA06DR5023-0NP22-0AA0

Reference: 6DR5023-0NP22-0AA06DR5023-0NP22-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions English / German / Chinese..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5023-0KG22-0BA2 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0KG22-0BA26DR5023-0KG22-0BA2

Reference: 6DR5023-0KG22-0BA26DR5023-0KG22-0BA2

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i), Increased safety (Ex e), Dust ignition protection by enclosure (Ex t). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

7ML5432-0GC20-0AF0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5432-0GC20-0AF07ML5432-0GC20-0AF0

Reference: 7ML5432-0GC20-0AF07ML5432-0GC20-0AF0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): DN100 PN10/16 EN 1092-1 type B1 raised face Communication: 4...20mA HART,start-up at <3.

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): DN100 PN10/16 EN 1092-1 type B1 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Enhanced safety: ATEX II 1/2 GD, 1D, 2D, Ex eb mb ia IIC T4 Ga/Gb; UKEX II 1/2 GD, 1D, 2D, Ex eb mb ia IIC T4 Ga/Gb; IECEx Ex eb ia mb IIC T4 Ga/Gb; INMETRO Ex e ia mb IIC T4 Ga/Gb, INMETRO Ex ia ta IIIC T100°C Da, IP67/IP68; EAC Ex Ga/Gb Ex ia/e+mb IIC T4 X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7ML5440-0FB00-1AC2 SIEMENS SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-co..

SIEMENS

Manufacturer Code: 7ML5440-0FB00-1AC27ML5440-0FB00-1AC2

Reference: 7ML5440-0FB00-1AC27ML5440-0FB00-1AC2

Catalog Number: --

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X M20 x 1.5 (includes plastic cable gland). Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Delivery: See availabilitySee availability

7ML5440-1EA00-0AC1 SIEMENS SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-co..

SIEMENS

Manufacturer Code: 7ML5440-1EA00-0AC17ML5440-1EA00-0AC1

Reference: 7ML5440-1EA00-0AC17ML5440-1EA00-0AC1

Catalog Number: --

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Tag: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Delivery: See availabilitySee availability

7MH7170-1QB10 SIEMENS Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft..

SIEMENS

Manufacturer Code: 7MH7170-1QB107MH7170-1QB10

Reference: 7MH7170-1QB107MH7170-1QB10

Catalog Number: --

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 800 mm / A= 37.7 ... 41" (956 ... 1 040 mm) Finish: 316 (1.4401) stainless steel Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 4.5", self-cleaning." Tape Width / Dimension ""A"": 800 mm / A= 37.7 ... 41" (956 ... 1 040 mm) "Material: 1.4401 stainless steel (in 4.5" versions" only the shaft is made of 1.4401 stainless steel)." Mounting piece: Metric dimensions. .

Delivery: See availabilitySee availability

7MH7187-4HC20 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4HC207MH7187-4HC20

Reference: 7MH7187-4HC207MH7187-4HC20

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 78" / A= 85 ... 89.5" (2 159 ... 2 273 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 78" / A= 85 ... 89.5" (2 159 ... 2 273 mm) paint: stainless steel 1.4401 with bearings made of corrosion-resistant material mounting material: without mounting bearings

Delivery: See availabilitySee availability

7MH7188-5JC20 SIEMENS Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7188-5JC207MH7188-5JC20

Reference: 7MH7188-5JC207MH7188-5JC20

Catalog Number: --

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / Dimension "A": 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) paint: 1.4401 stainless steel with bearings made of corrosion-resistant material mounting bearing: without mounting bearings

Delivery: See availabilitySee availability

7MH7171-3EA10 SIEMENS Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7171-3EA107MH7171-3EA10

Reference: 7MH7171-3EA107MH7171-3EA10

Catalog Number: --

Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 6.5 inch diameter. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 36" / A= 41.6 ... 47.5" (1 055 ... 1 206 mm) Finish: Standard, painted mild steel Bearings: metric bearings .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 36" / A= 41.6 ... 47.5" (1 055 ... 1 206 mm) Painted steel. Mounting piece: Metric dimensions. .

Delivery: See availabilitySee availability

7ML5433-1FB20-0AM0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5433-1FB20-0AM07ML5433-1FB20-0AM0

Reference: 7ML5433-1FB20-0AM07ML5433-1FB20-0AM0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) Type N (68 mm) Tuchenhagen Varivent EHEDG only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Type N (68 mm) Tuchenhagen Varivent EHEDG only Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb Ex iaD 20 T90 IP67 DIP A20 T A, 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7MF1575-1DB10 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-1DB107MF1575-1DB10

Reference: 7MF1575-1DB107MF1575-1DB10

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...4 mH2O Cable length: 10m Stainless steel 316L (1.4404) Protective cap ETFE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0...4 mH2O Cable length: 10m Stainless steel 316L (1.4404) ETFE FKM protection cap (standard) none

Delivery: See availabilitySee availability

7MF1575-2EA10 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2EA107MF1575-2EA10

Reference: 7MF1575-2EA107MF1575-2EA10

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0....15 ftH2O Cable length: 10m (30ft) Stainless steel 316L (1.4404) Protective cap PPE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0....15 ftH2O Cable length: 10m (30ft) Stainless steel 316L (1.4404) PPE FKM protective cap (standard) none

Delivery: See availabilitySee availability

7MH7170-2TE20 SIEMENS Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft..

SIEMENS

Manufacturer Code: 7MH7170-2TE207MH7170-2TE20

Reference: 7MH7170-2TE207MH7170-2TE20

Catalog Number: --

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 1 200 mm / A= 54.6 ... 59.2" (1 387 ... 1 504 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape width / Dimension ""A"": 1 200 mm / A= 54.6 ... 59.2" (1 387 ... 1 504 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6" nominal width)." No mounting piece. .

Delivery: See availabilitySee availability

7MH7102-2AA40 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-2AA407MH7102-2AA40

Reference: 7MH7102-2AA407MH7102-2AA40

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Side mount, 40 t/h max. design capacity Flowguide size: No flowguide Flowguide construction: No flowguide Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Side mounted, 40 t/h (44 STPH), max. rated capacity Flow guide size: Without flow guide Flow guide construction: Without flow guide Case construction: 304 stainless steel (1.4301).

Delivery: See availabilitySee availability

6DR5110-0NG22-0BA1 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-act..

SIEMENS

Manufacturer Code: 6DR5110-0NG22-0BA16DR5110-0NG22-0BA1

Reference: 6DR5110-0NG22-0BA16DR5110-0NG22-0BA1

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5623-0NS02-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, FOUNDATION Fieldbus, Ex/nEx, doubl..

SIEMENS

Manufacturer Code: 6DR5623-0NS02-0AA06DR5623-0NS02-0AA0

Reference: 6DR5623-0NS02-0AA06DR5623-0NS02-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, FOUNDATION Fieldbus, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Device plug M12 (A coding) for electronics, ¼‑18 NPT. The cable socket M12 can be ordered separately with 6DR4004-5A. Without limit monitor. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions English / German / Chinese. Without Manometer block / Venting gauge block / Booster..

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. M12 fixed connector (A coding) for electronics, 1/4-18 NPT. The M12 overhead connector can be ordered separately with 6DR4004-5A. No limit monitor. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5013-0KG22-0AA1 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, a..

SIEMENS

Manufacturer Code: 6DR5013-0KG22-0AA16DR5013-0KG22-0AA1

Reference: 6DR5013-0KG22-0AA16DR5013-0KG22-0AA1

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i), Increased safety (Ex e), Dust ignition protection by enclosure (Ex t). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

7ML5440-0CA00-1AC1 SIEMENS SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-co..

SIEMENS

Manufacturer Code: 7ML5440-0CA00-1AC17ML5440-0CA00-1AC1

Reference: 7ML5440-0CA00-1AC17ML5440-0CA00-1AC1

Catalog Number: --

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 304 stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 304 stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Delivery: See availabilitySee availability

7MH7218-1CT35-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1CT35-17MH7218-1CT35-1

Reference: 7MH7218-1CT35-17MH7218-1CT35-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 77", 'A'= 86" (2184 mm) Width's based on belt width: For use with 3" integrated round bar weight (66"-77", 59.5-69.5 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and "A" measurement: 77", 'A' = 86" (2184 mm) Width according to belt width: For use with integrated 3" round weight (66"-77", 59.5-69.5 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7187-4TC00 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4TC007MH7187-4TC00

Reference: 7MH7187-4TC007MH7187-4TC00

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 2 200 mm / A= 94.1 ... 98.6" (2 390 ... 2 504 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal diameter Tape width / Dimension "A": 2 200 mm / A = 94.1 ... 98.6" (2 390 ... 2 504 mm) Paint: 1.4401 stainless steel with corrosion resistant material bearings Mounting material: Standard

Delivery: See availabilitySee availability

7ML5433-1CA20-1AM0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5433-1CA20-1AM07ML5433-1CA20-1AM0

Reference: 7ML5433-1CA20-1AM07ML5433-1CA20-1AM0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404) DN50 Aseptic/Hygienic flanged to DIN 11864-2 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic flanged connection DN50 according to DIN 11864-2 Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb Ex iaD 20 T90 IP67 DIP A20 T A, 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7MH7187-4AD10 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4AD107MH7187-4AD10

Reference: 7MH7187-4AD107MH7187-4AD10

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 48" / A= 55 ... 59.5" (1 397 ... 1 511 mm) Finish: epoxy painted Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 48" / A= 55 ... 59.5" (1 397 ... 1 511 mm) paint: epoxy resin painted mounting bearing: metric units

Delivery: See availabilitySee availability

7MH7187-4QE20 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4QE207MH7187-4QE20

Reference: 7MH7187-4QE207MH7187-4QE20

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 1 600 mm / A= 70.4 ... 74.9" (1 788 ... 1 904 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 1 600 mm / A = 70.4 mm ... 74.9" (1 788 ... 1 904 mm) paint: steel painted with corrosion-resistant material mounting bearing material: without mounting bearings

Delivery: See availabilitySee availability

7MH7188-5EA10 SIEMENS Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7188-5EA107MH7188-5EA10

Reference: 7MH7188-5EA107MH7188-5EA10

Catalog Number: --

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) Finish: standard, painted mild steel Bearings: metric size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) paint: standard, painted steel mounting bearing: metric units

Delivery: See availabilitySee availability

7MH7725-1DF SIEMENS LOAD CELL PBD-23900265, With Hardware, MSI,1000 LB, Stainless Steel, NTEP,OIML/MID F, SP..

SIEMENS

Manufacturer Code: 7MH7725-1DF7MH7725-1DF

Reference: 7MH7725-1DF7MH7725-1DF

Catalog Number: --

LOAD CELL PBD-23900265, With Hardware, MSI,1000 LB, Stainless Steel, NTEP,OIML/MID F, SPARE

Delivery: See availabilitySee availability

7MF1575-3HE21 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-3HE217MF1575-3HE21

Reference: 7MF1575-3HE217MF1575-3HE21

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...1 bar Cable length: 20m Stainless steel 904L (1.4539) Protective cap ETFE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...1 bar Cable length: 20m 904L stainless steel (1.4539) ETFE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Delivery: See availabilitySee availability

M56340-A0033 SIEMENS DOUBLE SHUT-OFF VALVE TYPE A TEST CONNECT.SIMIL.TO DIN 16272 W/ NARROW TEST FLANGE MAX...

SIEMENS

Manufacturer Code: M56340-A0033M56340-A0033

Reference: M56340-A0033M56340-A0033

Catalog Number: --

DOUBLE SHUT-OFF VALVE TYPE A TEST CONNECT.SIMIL.TO DIN 16272 W/ NARROW TEST FLANGE MAX.OPER. PRESS. 250BAR BRASS

DOUBLE SHUT-OFF VALVE TYPE A TEST CONNECT.SIMIL.TO DIN 16272 W/ NARROW TEST FLANGE MAX. OPER. PRESS. 250BAR BRASS

Delivery: See availabilitySee availability

7ME4603-2FG04-1AG0-Z F00 SIEMENS SITRANS FCT030 Coriolis Flow Transmitter, works with FC MASS 2100, FC300, F..

SIEMENS

Manufacturer Code: 7ME4603-2FG04-1AG0-Z F007ME4603-2FG04-1AG0-Z F00

Reference: 7ME4603-2FG04-1AG0-Z F007ME4603-2FG04-1AG0-Z F00

Catalog Number: --

SITRANS FCT030 Coriolis Flow Transmitter, works with FC MASS 2100, FC300, FCS400 sensors. Suitable for measuring volumetric flow, fractional flow, mass flow, temperature and density of liquids and gases, aluminum casting box. Coriolis Transmitter FCT030 Compact Mount Transmitter Aluminum IP67 / NEMA 4X IECEx GDb Zone 1; Zone 21. FC410: z1/z21. FC430 Compact: z1/z21. FCS400 Remote: z1/z21. FCT030 Field mounting: z1/z21. Cable pass-throughs are not supplied NPT 1/2" thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA active HART. No optional inputs or outputs

SITRANS FCT030 Coriolis Flow Transmitter SITRANS FCT030 Coriolis Flow Transmitter, works with FCS400 and FCS300 sensors. Suitable for measuring volumetric©flow, fractional flow, mass flow, temperature and density of equids and gases, aluminum die-cast box. Coriolis FCT030 transmitter Compact mounting Aluminum IP67 / NEMA 4X IECEx GDb No cable grommets supplied NPT 1/2" thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA HART active (Ex). No optional inputs or outputs

Delivery: See availabilitySee availability

7MH7102-2LB40 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-2LB407MH7102-2LB40

Reference: 7MH7102-2LB407MH7102-2LB40

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Side mount, 40 t/h max. design capacity Flowguide size: DN 100 flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Side mounted, 40 t/h (44 STPH), max. rated capacity Flow Guide Size: DN 100 Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Case Construction: 304 Stainless Steel (1.4301).

Delivery: See availabilitySee availability

7MH7102-3PF10 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-3PF107MH7102-3PF10

Reference: 7MH7102-3PF107MH7102-3PF10

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 250 flange pattern Flowguide construction: 304 (1.4301) stainless steel Cabinet construction: mild steel, polyester painted .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 250 Type Flange Flow Guide Construction: 304 Stainless Steel (1.4301) Case Construction: Mild Steel Painted with C5-M Rated Polyester Paint.

Delivery: See availabilitySee availability

6DR5110-0NP33-0AA1 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-act..

SIEMENS

Manufacturer Code: 6DR5110-0NP33-0AA16DR5110-0NP33-0AA1

Reference: 6DR5110-0NP33-0AA16DR5110-0NP33-0AA1

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5113-0NP23-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-act..

SIEMENS

Manufacturer Code: 6DR5113-0NP23-0AA06DR5113-0NP23-0AA0

Reference: 6DR5113-0NP23-0AA06DR5113-0NP23-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Delivery: See availabilitySee availability

6DR5010-0NP32-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, p..

SIEMENS

Manufacturer Code: 6DR5010-0NP32-0BA06DR5010-0NP32-0BA0

Reference: 6DR5010-0NP32-0BA06DR5010-0NP32-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Delivery: See availabilitySee availability

6DR5020-0EM23-0AA4 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, p..

SIEMENS

Manufacturer Code: 6DR5020-0EM23-0AA46DR5020-0EM23-0AA4

Reference: 6DR5020-0EM23-0AA46DR5020-0EM23-0AA4

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

7ML5432-0BH20-1AF0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5432-0BH20-1AF07ML5432-0BH20-1AF0

Reference: 7ML5432-0BH20-1AF07ML5432-0BH20-1AF0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 4" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable inlets): Aluminum, 2 X M20 x 1.

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 4" Class 150 ASME B16.5 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 Lens material (antenna): TFM 1600 recessed lens Approvals: Increased safety: ATEX II 1/2 GD, 1D, 2D, Ex eb mb ia IIC T4 Ga/Gb; UKEX II 1/2 GD, 1D, 2D, Ex eb mb ia IIC T4 Ga/Gb; IECEx Ex eb ia mb IIC T4 Ga/Gb; INMETRO Ex e ia mb IIC T4 Ga/Gb, INMETRO Ex ia ta IIIC T100°C Da, IP67/IP68; EAC Ex Ga/Gb Ex ia/e+mb IIC T4 X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7ML5440-1HB00-0BC2 SIEMENS SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-co..

SIEMENS

Manufacturer Code: 7ML5440-1HB00-0BC27ML5440-1HB00-0BC2

Reference: 7ML5440-1HB00-0BC27ML5440-1HB00-0BC2

Catalog Number: --

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, painted aluminum, with integral aimer Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, painted aluminum with integrated fixing flange Box (with cable entry): Stainless steel, 1 X M20 x 1.5 (includes plastic cable gland). Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Delivery: See availabilitySee availability

7MH7218-1AD00-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1AD00-17MH7218-1AD00-1

Reference: 7MH7218-1AD00-17MH7218-1AD00-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 21", 'A'= 30" (762 mm) Weight type: None Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and measure "A": 21", 'A' = 30" (762 mm) weight type: No Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1AN62-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1AN62-17MH7218-1AN62-1

Reference: 7MH7218-1AN62-17MH7218-1AN62-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 30", 'A'= 39" (991 mm) Width's based on belt width: For use with 6" integrated round bar weight (30"-41", 88.2-111.2 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and measurement "A": 30", 'A' = 39" (991 mm) Width according to belt width: For use with integrated 6" round weight (30"-41", 88.2-111.2 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1BM00-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1BM00-17MH7218-1BM00-1

Reference: 7MH7218-1BM00-17MH7218-1BM00-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 50", 'A'= 59" (1499 mm) Weight type: None Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Device Calibration: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Actuation: Manual Belt Width and Measurement "A": 50", 'A' = 59" (1499 mm) Weight Type: No Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1DQ67-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1DQ67-17MH7218-1DQ67-1

Reference: 7MH7218-1DQ67-17MH7218-1DQ67-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 95", 'A'= 104" (2642 mm) Width's based on belt width: For use with 6" integrated round bar weight (90"-96", 306.2-328.0 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 95", 'A' = 104" (2642 mm) Width according to belt width: For use with integrated 6" round weight (90"-96", 306.2-328.0 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7171-3GC20 SIEMENS Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7171-3GC207MH7171-3GC20

Reference: 7MH7171-3GC207MH7171-3GC20

Catalog Number: --

Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 6.5 inch diameter. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 42" / A= 48 … 53.5" (1 219 … 1359 mm) Finish: 316 (1.4401) stainless steel with corrosion resistant bearings Bearings: no bearings .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 42" / A= 48 ... 53.5" (1 219 … 1359 mm) Material: 1.4401 stainless steel, with mounting piece in stainless material. No mounting piece. .

Delivery: See availabilitySee availability

7ML5433-2YY20-0AM0 SIEMENS SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: conti..

SIEMENS

Manufacturer Code: 7ML5433-2YY20-0AM07ML5433-2YY20-0AM0

Reference: 7ML5433-2YY20-0AM07ML5433-2YY20-0AM0

Catalog Number: --

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) EXCLUDE Process Connection - Electronics Head assembly spare only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Types of connection to the process (all types have TFM1600 PTFE lens): WITHOUT connection to the process - Only replacement (electronic) head assembly Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb Ex iaD 20 T90 IP67 DIP A20 T A, 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

Delivery: See availabilitySee availability

7MF1575-1LB21 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-1LB217MF1575-1LB21

Reference: 7MF1575-1LB217MF1575-1LB21

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 316L (1.4404) Protective cap ETFE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 316L (1.4404) ETFE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Delivery: See availabilitySee availability

7MH7170-2CA00 SIEMENS Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft..

SIEMENS

Manufacturer Code: 7MH7170-2CA007MH7170-2CA00

Reference: 7MH7170-2CA007MH7170-2CA00

Catalog Number: --

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 30" / A= 35.6 ... 41.5" (902 ... 1 054 mm) Finish: standard, polyester painted mild steel Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 30" / A= 35.6 ... 41.5" (902 ... 1,054 mm) Painted steel. Mounting piece: Standard. .

Delivery: See availabilitySee availability

7MH7102-1EG60 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-1EG607MH7102-1EG60

Reference: 7MH7102-1EG607MH7102-1EG60

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 40 t/h max. design capacity Flowguide size: 8" ASME flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 40 t/h (44 STPH), max. rated capacity. Flow Guide Size: 8 inch, ASME Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 316 Stainless Steel (1.4401) .

Delivery: See availabilitySee availability

7MH7102-3FB10 SIEMENS SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for lo..

SIEMENS

Manufacturer Code: 7MH7102-3FB107MH7102-3FB10

Reference: 7MH7102-3FB107MH7102-3FB10

Catalog Number: --

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: 10" ASME flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: mild steel, polyester painted .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 10 inch, ASME Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Box Construction: Mild Steel Painted with C5-M Rated Polyester Paint.

Delivery: See availabilitySee availability

6DR5120-0NN33-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-act..

SIEMENS

Manufacturer Code: 6DR5120-0NN33-0BA06DR5120-0NN33-0BA0

Reference: 6DR5120-0NN33-0BA06DR5120-0NN33-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5323-0NG33-0AA2 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-a..

SIEMENS

Manufacturer Code: 6DR5323-0NG33-0AA26DR5323-0NG33-0AA2

Reference: 6DR5323-0NG33-0AA26DR5323-0NG33-0AA2

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5523-0KG03-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, PROFIBUS PA, Ex/nEx, double-acting..

SIEMENS

Manufacturer Code: 6DR5523-0KG03-0AA06DR5523-0KG03-0AA0

Reference: 6DR5523-0KG03-0AA06DR5523-0KG03-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, PROFIBUS PA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Type of protection (Ex): Intrinsic safety (Ex i), Increased safety (Ex e), Dust ignition protection by enclosure (Ex t). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Without limit monitor. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese..

SIPART PS2 Intelligent electro-pneumatic position controller, PROFIBUS PA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). thread the.: M20x1.5 / tyre: G 1/4 No limit monitor. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5013-0EM23-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, a..

SIEMENS

Manufacturer Code: 6DR5013-0EM23-0AA06DR5013-0EM23-0AA0

Reference: 6DR5013-0EM23-0AA06DR5013-0EM23-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Neum.: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Delivery: See availabilitySee availability

6DR5013-0NM32-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, a..

SIEMENS

Manufacturer Code: 6DR5013-0NM32-0BA06DR5013-0NM32-0BA0

Reference: 6DR5013-0NM32-0BA06DR5013-0NM32-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Delivery: See availabilitySee availability

6DR5023-0EG22-0AA2 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0EG22-0AA26DR5023-0EG22-0AA2

Reference: 6DR5023-0EG22-0AA26DR5023-0EG22-0AA2

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Delivery: See availabilitySee availability

6DR5010-0EN23-0AA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, p..

SIEMENS

Manufacturer Code: 6DR5010-0EN23-0AA06DR5010-0EN23-0AA0

Reference: 6DR5010-0EN23-0AA06DR5010-0EN23-0AA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Delivery: See availabilitySee availability

7MH7218-1CH65-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1CH65-17MH7218-1CH65-1

Reference: 7MH7218-1CH65-17MH7218-1CH65-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 67", 'A'= 76" (1930 mm) Width's based on belt width: For use with 6" integrated round bar weight (66"-77", 219.0-258.9 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Actuation: Manual Belt width and measurement "A": 67", 'A' = 76" (1930 mm) Width according to belt width: For use with integrated 6" round weight (66"-77", 219.0-258.9 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7218-1DF36-1 SIEMENS Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter desi..

SIEMENS

Manufacturer Code: 7MH7218-1DF36-17MH7218-1DF36-1

Reference: 7MH7218-1DF36-17MH7218-1DF36-1

Catalog Number: --

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 86", 'A'= 95" (2413 mm) Width's based on belt width: For use with 3" integrated round bar weight (78"-89", 70.4-80.4 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 86", 'A' = 95" (2413 mm) Width according to belt width: For use with integrated 3" round weight (78"-89", 70.4-80.4 kg) Execution: Standard, in steel with Epoxy paint.

Delivery: See availabilitySee availability

7MH7188-5UC10 SIEMENS Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-d..

SIEMENS

Manufacturer Code: 7MH7188-5UC107MH7188-5UC10

Reference: 7MH7188-5UC107MH7188-5UC10

Catalog Number: --

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2 400 mm / A= 101.9 ... 106.4" (2 588 ... 2 704 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 2 400 mm / H= 101.9 ... 106.4" (2 588 ... 2 704 mm) paint: 1.4401 stainless steel with corrosion-resistant material bearings mounting bearing: metric units

Delivery: See availabilitySee availability

7MH7187-4JE10 SIEMENS Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-dri..

SIEMENS

Manufacturer Code: 7MH7187-4JE107MH7187-4JE10

Reference: 7MH7187-4JE107MH7187-4JE10

Catalog Number: --

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 84" / A= 91 ... 95.5" (2 311 ... 2 426 mm) paint: steel painted with corrosion-resistant material mounting bearing material: metric units

Delivery: See availabilitySee availability

7MF1575-2BE10 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2BE107MF1575-2BE10

Reference: 7MF1575-2BE107MF1575-2BE10

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...6 ftH2O Cable length: 5m (15ft) Stainless steel 904L (1.4539) Protective cap ETFE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0...6 ftH2O Cable length: 5m (15ft) 904L stainless steel (1.4539) ETFE FKM protection cap (standard) none

Delivery: See availabilitySee availability

7MF1575-2HC20 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2HC207MF1575-2HC20

Reference: 7MF1575-2HC207MF1575-2HC20

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...30 ftH2O Cable length: 20m (60ft) Stainless steel 316L (1.4404) Housing and protective cap EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...30 ftH2O Cable length: 20m (60ft) Stainless steel 316L (1.4404) EPDM protective housing and cap (for drinking water) none

Delivery: See availabilitySee availability

7MF1575-2LF10 SIEMENS Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter,..

SIEMENS

Manufacturer Code: 7MF1575-2LF107MF1575-2LF10

Reference: 7MF1575-2LF107MF1575-2LF10

Catalog Number: --

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...120 ftH2O Cable length: 50m (150ft) Stainless steel 904L (1.4539) Housing and protective cap FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...120 ftH2O Cable length: 50m (150ft) 904L stainless steel (1.4539) FKM protective housing and cap (standard) none

Delivery: See availabilitySee availability

7ML5745-2AA02-1AA0 SIEMENS SITRANS LVL100 Vibrating point level switch. Detects level and material in liquid..

SIEMENS

Manufacturer Code: 7ML5745-2AA02-1AA07ML5745-2AA02-1AA0

Reference: 7ML5745-2AA02-1AA07ML5745-2AA02-1AA0

Catalog Number: --

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Shipping approvals Version/Process Temperature: Standard -40 to 100 C Process connection: Thread G 3/4" A PN64 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: M12x1 / IP67 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Marine approvals Process temperature: Standard -40 ... 100 C process connection: G thread 3/4" A PN64/316L electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: M12x1 / IP67

Delivery: See availabilitySee availability

6DR5123-0NN23-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-act..

SIEMENS

Manufacturer Code: 6DR5123-0NN23-0BA06DR5123-0NN23-0BA0

Reference: 6DR5123-0NN23-0BA06DR5123-0NN23-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position controller, 4...20mA, HART, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5020-0NG33-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, p..

SIEMENS

Manufacturer Code: 6DR5020-0NG33-0BA06DR5020-0NG33-0BA0

Reference: 6DR5020-0NG33-0BA06DR5020-0NG33-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5023-0EP23-0BA0 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0EP23-0BA06DR5023-0EP23-0BA0

Reference: 6DR5023-0EP23-0BA06DR5023-0EP23-0BA0

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Delivery: See availabilitySee availability

6DR5023-0GM23-0BA4 SIEMENS SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, a..

SIEMENS

Manufacturer Code: 6DR5023-0GM23-0BA46DR5023-0GM23-0BA4

Reference: 6DR5023-0GM23-0BA46DR5023-0GM23-0BA4

Catalog Number: --

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: M20x1.5 / Neum.: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Delivery: See availabilitySee availability

products sitemap