SIEMENS

MLC Calibration weight, (Stainless Steel 304(1.4301)) For scales with belt width of 24", 650mm, 3.11 lbs (1.41 kg)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 without option module . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. No option module. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 50A 10K JIS B 2220 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Flameproof: IECEx/ATEX II 1/2 GD 1D, 2D Ex d mb ia IIC T4 Ga/Gb, Ex ia ta IIIC T100 C Da, INMETRO Ex d ia mb IIC T4 Ga/Gb, Ex ia ta IIIC T100 C Da, CE, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 50A 10K JIS B 2220 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Flameproof: ATEX II 1/2 GD, 1D, 2D, Ex db mb ia IIC T4 Ga/Gb; ATEX II 1/2 GD, 1D, 2D, Ex ia ta IIIC T100°C Da; UKEX II 1/2 GD, 1D, 2D, Ex db mb ia IIC T4 Ga/Gb; UKEX II 1/2 GD, 1D, 2D, Ex ia ta IIIC T100°C Da; IECEx Ex db mb ia IIC T4 Ga/Gb, IECEx Ex ia ta IIIC T100°C Da; INMETRO Ex d ia mb IIC T4 Ga/Gb, INMETRO Ex ia ta IIIC T100°C Da, IP67/IP68; EAC Ex Ga/Gb Ex ia/db+mb IIC T4 X, EAC Ex Ex ia ta IIIC T100°C Da; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: Panel mount Input voltage: 12 to 30 VDC Number of measurement points: Single point model, 6 relays Data Communications: Smartlinx DevicenetTM module Approvals: General Purpose CE, FM, CSA US/C , UL listed, RCM, EAC, KCC

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Mounting: Panel flush mounting Auxiliary power: DC, 12 to 30 V Number of measurement points: single-channel version, 6 relays Data communication (SmartLinx): SmartLinx DeviceNet module Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, FM, CCSAUS, UL Listed, RCM, EAC, KC

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: Panel mount Input voltage: 12 to 30 VDC Number of measurement points: Dual point model, 6 relays Data Communications: Smartlinx DevicenetTM module Approvals: General Purpose CE, FM, CSA US/C , UL listed, RCM, EAC, KCC

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Mounting: Panel flush mounting Auxiliary power: DC, 12 to 30 V Number of measurement points: two-channel version, 6 relays Data communication (SmartLinx): SmartLinx DeviceNet module Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, FM, CCSAUS, UL Listed, RCM, EAC, KC

Milltronics SF500 A full feature, powerful integrator designed for use with solids flowmeters Input voltage: AC Voltage 100-240V Auxiliary input/ output (required for PID control and on-line calibration): board with 2 analog inputs and 2 analog outputs Feature Software: Standard Auxiliary Memory: none Data communication: Smartlinx PROFINET IO Enclosure: standard enclosure, 4 entries, M20 Trade approval sticker: Not legal for Canadian and EU trade Approvals: CE, CSA US/C, FM,RCM,EAC,KCC

Milltronics SF500 Integrator; Advanced multifunction integrator for use with flow meters for granular solids. Input voltage: AC voltage 100-240V Additional outputs / inputs: With 2 outputs and 2 analog inputs. Standard software. No additional memory. Communication: SmartLinx ProfNet Module Box: Standard Box, 4 Slides, M20 With Permission to Use Label (not for Canada). Approvals from: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 6" (150 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 1000 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 6" / 150 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 1000 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x M20 x 1.5 approvals: ATEX II 1/2 D T6, CE, R

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1001 ... 1500 Initial:1250 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 1001 ... 1500 Initial: 1250 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 351 ... 400 Initial: 375 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 351 ... 400 Initial: 375 Non-Ex Requirements for EU/Australia

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 3 bar g (40 psi g) maximum Output/communication: 4 to 20 mA, HART Approvals: CSA/FM Class I, Div. 2, Gr. A, B,C,D, Class II, Div.1, Gr. E, F,G, Class III, IC FCC Local display interface: With LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: CSA/FM Class I, Div. 2, Gr. A,B,C,D, Class II, Div.1,Gr. E,F,G, Class III, IC FCC User Interface (Local): With LDI (User Interface)

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): B = 301 ... 350 Initial: 315 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): B = 301 ... 350 Initial: 315 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 without option module . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. No option module. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Shipping approvals Process temperature: Extended -40 to 150 C Process connection: Thread 1" NPT PN64 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Marine Approvals Process temperature: Advanced -40 ... 150 C process connection: 1" NPT PN64/316L thread electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: According to DIN 43650 incl. connector with QUICKON quick connection / IP65

Milltronics SF500 A full feature, powerful integrator designed for use with solids flowmeters Input voltage: AC Voltage 100-240V Auxiliary input/ output (required for PID control and on-line calibration): board with 2 analog inputs and 2 analog outputs Feature Software: Standard Auxiliary Memory: none Data communication: Smartlinx EtherNet I/P Enclosure: standard enclosure, no entry holes Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM,RCM,EAC,KCC

Milltronics SF500 Integrator; Advanced multifunction integrator for use with flow meters for granular solids. Input voltage: AC voltage 100-240V Additional outputs / inputs: With 2 outputs and 2 analog inputs. Standard software. No additional memory. Communication: SmartLinx EtherNet I/P Module Standard housing, no drilling. No use permission label. Approvals from: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 6" (150 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 1000 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x NPT x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 6" / 150 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 1000 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x 1/2" NPT approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE & R

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 451 ... 500 Initial: 500 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 451 ... 500 Initial: 500 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

LOCKNUT,2" BSPT, PLASTIC

2" BSP FIXING NUT, FLANGED

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 6 mm Connection Side: European Design with Ceramic Socket Average Range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

Milltronics BW500 A full-feature, powerful integrator designed for use with both belt scales and weighfeeders Input voltage: DC voltage 10-30V Auxiliary Input / Output Board: Board with 2 analog inputs and 2 analog outputs (required for PID control and on-line calibration) Feature Software: BW500, 1 ... 6 load cell input (advanced feature set) Auxiliary Memory: none Data Communications: Smartlinx DeviceNet module Enclosure: standard enclosure, no entry holes Trade approval sticker: Legal for Canadian trade Approvals: CE, CSA US/C, FM, RCM,EAC,KCC

Milltronics BW500 & BW500/L Integrators: Advanced multifunction integrator, designed for belt scales and dosing machines. Input voltage: DC voltage 10-30V Additional outputs / inputs: With 2 outputs and 2 analog inputs. Standard software. BW500, Input 1 ... 6 load cells (advanced functions) No additional memory. Communication: SmartLinx DeviceNet module. Standard housing, no drilling. Sticker for Business Permit: Business Permit for Canada. Certifications: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1100Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) Type N (68 mm) Tuchenhagen Varivent EHEDG only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Intrinsically Safe: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA 90C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Type N (68 mm) Tuchenhagen Varivent EHEDG only Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Intrinsic safety: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

Milltronics SF500 A full feature, powerful integrator designed for use with solids flowmeters Input voltage: AC Voltage 100-240V Auxiliary input/ output (required for PID control and on-line calibration): board with 2 analog inputs and 2 analog outputs Feature Software: Standard Auxiliary Memory: none Data communication: Smartlinx EtherNet I/P Enclosure: standard enclosure, no entry holes Trade approval sticker: Not legal for Canadian and EU trade Approvals: CE, CSA US/C, FM,RCM,EAC,KCC

Milltronics SF500 Integrator; Advanced multifunction integrator for use with flow meters for granular solids. Input voltage: AC voltage 100-240V Additional outputs / inputs: With 2 outputs and 2 analog inputs. Standard software. No additional memory. Communication: SmartLinx EtherNet I/P Module Standard housing, no drilling. With a permission to use label (not for Canada). Approvals from: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Single point version, level only, 3 relays Data Communications: Without module Approvals: CSA Class I, Div.2, Group A,B,C and D; Class II, DIV 2, Group F and G, Class III (for wall mount applications only)

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. mounting: field box, not drilled auxiliary power: DC, 12 to 30 V Number of measuring points: single-channel version; level only; 3 Data Communication Relays (SmartLinx): Without module Approvals: CSA Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2, Groups F and G; Class III, EAC Ex Ex tc IIIC T75 °C Dc X (for wall mount applications only)

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 1001 ... 1500 Initial:1250 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 1001 ... 1500 Initial: 1250 Non-Ex Requirements for EU/Australia