SIEMENS

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Digital I/O Module (DIO) Optionally available with device plug M12 (D coding) Order code: -Z D55 without option module . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 "fault warning" output). No option module. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS LR200 Radar level transmitter with polypropylene rod: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries. Enclosure / Cable Inlet: Aluminum, Epoxy painted, 2 x M20 x 1.5, Polypropylene antenna type - (Max. 3 Bar pressure and +80 C): R 1-1/2 inch ((BSPT), EN 10226-1), comes with integral 250 mm shield Approvals: General Purpose, CSA , FM, Industry Canada, FCC Communication / Output: PROFIBUS PA .

. SITRANS LR200 Radar Level Transmitter with Polypropylene Rod - Continuous, non-contact, 20 m (66 ft) range measurement for liquids and sludge. Field box / cable entry: Epoxy coated aluminium, 2 x M20 x 1.5 Polypropylene antenna (Max. Pressure 3 bar and +80 C): R 1-1/2 inch ((BSPT), EN 10226-1), with integrated 250 mm shielding Approvals: General Purpose, CSA, FM, Industry Canada, FCC communication/output: PROFIBUS PA

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx Devicenet module Output relays: 1 relay (1 Form A), 250 V AC Approvals: ATEX II 3D

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of measurement points: Version for one point Data communication (SmartLinx): SmartLinx DeviceNet module Output relays: 1 relay (1 A-contact), 250 V AC (only on the MultiRanger 100 model) Approvals: ATEX II 3D

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 3" (80 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 200 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 3" / 80 mm antenna: Horn 4" antenna, suitable for 100 mm (4") nozzle with 200 mm extension Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x M20 x 1.5 approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE & R

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.5 psi g) maximum Output/communication: 4 to 20 mA, HART Approvals: General purpose, FM, CSA US/C, Industry Canada, FCC, CE, RED, RCM Local display interface: Without LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Tag: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: Ordinary Locations/General Purpose (Non-Ex), FM, cCSAus, IC, FCC, CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

Adaptor (XPS30) 1-1/2" BSP

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404): DN100 Aseptic/Hygienic clamp according to DIN 11864/11853-3(Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: General Purpose,CE, CSA, FM, FCC, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic clamp DN100 connection according to DIN 11864-3 (Form A) Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CSA, FM, FCC, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 451 ... 500 Initial: 500 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 451 ... 500 Initial: 500 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): DN50 PN10/16 EN 1092-1 type B1 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable inlets): Aluminum, 2 X M20 x 1.5 Antenna Lens Material: TFM 1600 Flush lens Approvals: Intrinsically Safe: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): DN50 PN10/16 EN 1092-1 type B1 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 Lens material (antenna): TFM 1600 recessed lens Approvals: Intrinsic safety: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Overfill protection (WHG) Process temperature: Hygienic applications -40 to 150 C Process connection: Thread 1/2" NPT (ASME B16.5) PN64 / 316L Ra <0.8mm Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Overflow safety according to WHG process temperature: Sanitary applications -40 ... 150 C process connection: Thread 1/2" NPT (ASME B16.5) PN64/316L Ra < 0.8 mm electronics: Transistor output PNP DC 10...55 V Housing: 316L Electrical connection/ degree of protection: According to DIN 43650 incl. connector with QUICKON quick connection / IP65

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Dual point version Data Communications (Smartlinx): Smartlinx Devicenet module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of measurement points: Two-point version Data communication (SmartLinx): SmartLinx DeviceNet module Output relays: 6 relays (4 A-contacts, 2-contacts C), 250 V AC Approvals: Ordinary Locations/ General Purpose (Non-Ex), CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 200 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x NPT x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 200 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x 1/2" NPT Approvals: ATEX II 1/2 D T6, CE, R

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.5 psi g) maximum Output/communication: PROFIBUS PA Approvals: General purpose, FM, CSA US/C, Industry Canada, FCC, CE, RED, RCM Local display interface: With LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: Ordinary Locations/General Purpose (Non-Ex), FM, cCSAus, IC, FCC, CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

SITRANS TF temperature trans- mitter in housing for field mounting, two-wire system 4 to 20mA, with electrical isolation, with documentation on DVD, integrated transmitter: SITRANS TH200, programmable; Explosion protection: total device SITRANS TF acc. To FM (XP,DIP,NI,S) without screwed gland; Enclosure: Die-cast aluminium, Connections / Cable inlet screw gland 1/2 - 14 NPT; Without digital indicator Mounting bracket and securing parts made of steel,

SITRANS TF temperature converter in box for field installation Two-wire connection 4...20 mA, with galvanic insulation, with instructions with built-in converter SITRANS TH200, programmable With explosion protection, complete SITRANS TF equipment according to FM(XP,DIN,NI,S) without cable pass-through for cable entry Boxes: Cast aluminum Connections/Cable entry Cable grommet 1/2-14 NPT Without digital indicator With mounting bracket and steel fixing elements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 6 mm Connection Side: European Design with Free Wire Ends for Converter Mounting Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 6 mm Connection Side: European Design with Free Wire Ends for Converter Mounting Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor quantity, type, accuracy 2xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): B = 1001 ... 1500 Initial:1250 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor quantity, type, accuracy 2xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): B = 1001 ... 1500 Initial: 1250 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

ADAPTER 1"NPT/M20

1" NPT to M20 Adapter

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 3" (80 mm) Antenna: 3" horn antenna, fits 80 mm or 3" nozzles Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 100 to 230 V AC, 2 x NPT x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 3" / 80 mm antenna: 3" horn antenna, suitable for 80 mm (3") mm Purge connection (self-cleaning): Purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable entry: AC 100 ... 230 V, 2 x 1/2" NPT approvals: ATEX II 1/2 D T6, CE, R

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404): DN80 Aseptic/Hygienic clamp according to DIN 11864-3(Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Non Sparklng, NEPSI Ex nA IIC T4 Gc Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic clamp DN80 connection according to DIN 11864-3 (Form A) Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Non-sparking: NEPSI Ex nA IIC T4 Gc Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 6" (150 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 500 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 100 to 230 V AC, 2 x M20 x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 6" / 150 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 500 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: AC 100 ... 230 V, 2 x M20 x 1.5 Approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE and R

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: 4 button HMI, Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Dual point model, 6 relays Data Communications: Smartlinx PROFIBUS DP V1 module Approvals: General Purpose CE, FM, CSA US/C , UL listed, RCM, EAC, KCC

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Power supply: 4 button IHM, Wall mount, standard enclosure auxiliary power: DC, 12 to 30 V Number of measurement points: two-channel version, 6 relays Data communication (SmartLinx): SmartLinx PROFIBUS DPV1 module Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, FM, CCSAUS, UL Listed, RCM, EAC, KC

Air Temperature Sensor: TS-3,, Provides a current source input for corresponding ,, temperature compensation. Compensation is essential in ,, applications where variation in temperature of the sound,, medium is expected. Cable length: 30 m (98.43 ft) Process connection: R 3/4" ((BSPT), EN 10226) No Manual Approvals: CSA, FM

TS-3 Temperature Sensor: Continuous, non-contact measurement for use with ultrasonic level controllers. Connection cable length: 30 m. "Process connection thread: 3/4"" BSP." No operating instructions. Approvals: CSA, FM

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Digital I/O Module (DIO) Optionally available with device plug M12 (D coding) Order code: -Z D55 without option module . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 "fault warning" output). No option module. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: Wall mount, 4 entries, 4 M20 cable glands included Input voltage: 100 to 230 VAC Number of measurement points: Single point version, level only 1 relay Data Communications: Smartlinx DevicenetTM module Approvals: CSA Class I, Div.2, Group A,B,C and D; Class II, DIV 2, Group F and G, Class III (for wall mount applications only)

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. mounting: field box, 4 cable entries 4 x M20x1.5 auxiliary power: AC, 100 to 230 V Number of measurement points: single-channel version; level only; 1 Data Communication Relay (SmartLinx): SmartLinx DeviceNet Approvals Module: CSA Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2, Groups F and G; Class III, EAC Ex Ex tc IIIC T75 °C Dc X (for wall mount applications only)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT without limit monitor without option module . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." No limit monitor. No option module. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): DN50 PN10/16 EN 1092-1 type B1 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): DN50 PN10/16 EN 1092-1 type B1 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Dual point version Data Communications (Smartlinx): Smartlinx Devicenet module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: CSA Class I, Div.2, Group A,B,C and D; Class II, Div.2, Group F and G; Class III

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of Measurement Points: Two-Point Version Data Communication (SmartLinx): SmartLinx DeviceNet Module Output Relays: 6 Relays (4 A-Contacts, 2 C-Contacts), 250 V AC Approvals: CSA Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2, Groups F and G; Class III

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 200 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 100 to 230 V AC, 2 x M20 x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 200 mm extension Purge connection (self-cleaning): Purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable entry: AC 100 ... 230 V, 2 x M20 x 1.5 Approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE and R

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 3 bar g (40 psi g) maximum Output/communication: 4 to 20 mA, HART Approvals: General purpose, FM, CSA US/C, Industry Canada, FCC, CE, RED, RCM Local display interface: Without LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: Ordinary Locations/General Purpose (Non-Ex), FM, cCSAus, IC, FCC, CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)