SIEMENS

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measure for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 451 ... 500 Initial: 500 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 451 ... 500 Initial: 500 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 351 ... 400 Initial: 375 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 351 ... 400 Initial: 375 Non-Ex Requirements for EU/Australia

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Shipping approvals Process temperature: Extended -40 to 150 C Process connection: Thread 1/2" NPT (ASME B16.5) PN64 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: M12x1 / IP67 1 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Marine Approvals Process temperature: Advanced -40 ... 150 C process connection: 1/2" NPT thread (ASME B16.5) PN64/316L electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: M12x1 / IP67

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.2 -40 ... 1100Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 6" (150 mm) Antenna: 3" horn antenna, fits 80 mm or 3" nozzles Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 100 to 230 V AC, 2 x NPT x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 6" / 150 mm antenna: 3" horn antenna, suitable for 80 mm (3") mm Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: AC 100 ... 230 V, 2 x 1/2" NPT Approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE and R

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double acting; Enclosure stainless steel, flame-proof . Type of explosion protection: Explosion proof Connection thread: el.: M25 x 1,5, / mec.: G1/4, (only for EEx d explosion protection) Digital I/O Module (DIO) Optionally available with device plug M12 (D coding) Order code: -Z D55 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . instructions manual: French, Spanish, Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, stainless steel case, explosion-proof (Ex d), for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Explosion-proof enclosure (Ex d), Dust-proof protection by enclosure (Ex t). Connection thread el.: M25x1.5 / pneu.: G 1/4 Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 fault warning output) Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA; double acting; Enclosure stainless steel, flame-proof . Type of explosion protection: Explosion proof Connection thread M25 x 1,5 / G 1/4 (only for EEx d explosion protection) without limit monitor Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Instruction manual: French, Spanish, Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, double acting, stainless steel case, explosion-proof (Ex d), for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Explosion-proof enclosure (Ex d), Dust-proof protection by enclosure (Ex t). Connection thread el.: M25x1.5 / pneu.: G 1/4 No limit monitor. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 6 mm Connection Side: European Design with Free Wire Ends for Converter Mounting Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 6 mm Connection Side: European Design with Free Wire Ends for Converter Mounting Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 3" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Non Sparking: NEPSI Ex nA IIC T4 Gc Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 3" Class 150 ASME B16.5 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Non-sparking: NEPSI Ex nA IIC T4 Gc Pressure: View pressure/temperature reduction curves in the operating instructions

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 200, level, volume, flow and differential measurements Mounting, enclosure design: Wall mount, 4 entries, 4 M20 cable glands included Input voltage: 100 to 230 VAC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx PROFIBUS DPVO module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 200 for level, volume, flow and differential level measurement Mounting, enclosure design: Wall mounting, 4 holes, 4 M20 grommets included Product is in phase out but still available to order, Consider replacing with 7ML5033-xE Input voltage: 100 ... 230 V AC Number of measurement points: Single point version Data communication (SmartLinx): SmartLinx PROFIBUS DPV0 module Output relays: 6 relays (4 A-contacts, 2 C contacts), 250 V AC Approvals: Ordinary Locations/ Non-Ex, CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 100 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x NPT x 1.5 Approvals: CSA/FM Class II, Div.1, Gr. E,F,G Class III .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 100 mm extension Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x 1/2" NPT approvals: CSA/FM Class II, Div. 1, Groups E, F and G Class III

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens): 316L st/st (1.4435 or 1.4404) 2 inch Sanitary Clamp according to ISO 2852 Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Non-incendive:CSA/FM Class I, Div. 2, Groups A,B,C,D T5, FCC, Industry Canada Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): 2 inch sanitary clamp according to ISO 2852 Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Non-incendive: CSA/FM, Class I, Div. 2, Groups A,B,C,D T5, FCC, Industry Canada Pressure: See pressure/temperature reduction curves in the service instructions

POINTEK ULS 200 Ultrasonic non-contacting switch with two switch points for level detection of bulk solids, liquids and slurries in a wide variety of industries; ideal for sticky materials Power supply: 100 to 230 VAC, relay output Approvals: CE, C-TICK, CSA US/C, FM Transducer/Process connection: PVDF copolymer, R 2" ((BSPT), EN 10226) . Enclosure/cable inlet: Aluminum housing, Cable inlet 1/2" NPT

Pointek ULS200 Ultrasonic Level Switch: Non-Contact, Max. 5 m (16.4 ft) Measuring Range, for Bulk Solids, Liquids, and Slurries. Power supply: 100-230 V.c.a., with relay output. Certifications: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, cCSAus, FM "Sensor Material: Kynar Flex. Connection to the process: Thread 2"" BSP." Instructions manual: Not included. Aluminum housing. Cable entry: 1/2 NPT.

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.A -100 ... 450Cel; Extended measuring range Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Shipping approvals Process temperature: Standard -40 to 100 C Process connection: Thread G 1/2" (DIN 3852-A) PN64 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Marine approvals Process temperature: Standard -40 ... 100 C process connection: Thread G 1/2" (DIN 3852-A) PN64/316L electronics: Transistor output PNP DC 10...55 V Box: 316L Electrical connection/ degree of protection: According to DIN 43650 incl. connector with QUICKON quick connection / IP65

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 750Cel; Sensor quantity, type, accuracy 1xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 2" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable inlets): Aluminum, 2 X M20 x 1.5 Antenna Lens Material: TFM 1600 Flush lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 2" Class 150 ASME B16.5 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 Lens material (antenna): TFM 1600 recessed lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS F US SONOKIT 2-Tracks Op Instr Fr

SITRANS F US SONOKIT 2-Tracks Op Instr Fr

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 451 ... 500 Initial: 500 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 451 ... 500 Initial: 500 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.5 psi g) maximum Output/communication: PROFIBUS PA Approvals: CSA/FM Class I, Div. 2, Gr. A, B,C,D, Class II, Div.1, Gr. E, F,G, Class III, IC FCC Local display interface: With LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: CSA/FM Class I, Div. 2, Gr. A,B,C,D, Class II, Div.1,Gr. E,F,G, Class III, IC FCC User Interface (Local): With LDI (User Interface)

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 200, level, volume, flow and differential measurements Mounting, enclosure design: Wall mount, 4 entries, 4 M20 cable glands included Input voltage: 100 to 230 VAC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx PROFIBUS DPVO module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: CSA Class I, Div.2, Group A,B,C and D; Class II, Div.2, Group F and G; Class III

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 200 for level, volume, flow and differential level measurement Mounting, enclosure design: Wall mounting, 4 holes, 4 M20 grommets included Product is in phase out but still available to order, Consider replacing with 7ML5033-xE Input voltage: 100 ... 230 V AC Number of measurement points: Version for one point Data communication (SmartLinx): SmartLinx PROFIBUS DPV0 module Output relays: 6 relays (4 A-contacts, 2 C contacts), 250 V AC Approvals: CSA Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2, Groups F and G; Class III

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 100 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x NPT x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 100 mm extension Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x 1/2" NPT approvals: ATEX II 1/2 D T6, CE, R

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404): DN100 Aseptic/Hygienic clamp according to DIN 11864/11853-3(Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Non Sparklng, NEPSI Ex nA IIC T4 Gc Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Types of connection to the process (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic clamp DN100 connection according to DIN 11864-3 (Form A) Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Spark-free: NEPSI Ex nA IIC T4 Gc Pressure: See pressure/temperature reduction curves in the operating instructions