SIEMENS

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance to vibrations Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Increased resistance Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SHIELD,SUBMERGENCE,KIT,for XPS10/XRS-5 sensors

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 without option module . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. No option module. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Mounting disc, AS 100

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.2 -40 ... 750Cel Length unit of med. (mm): B = 901 ... 1000 Initial: 950 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1100Cel Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double acting; Enclosure aluminum, flame-proof . Type of explosion protection: Explosion proof Connection thread el.: 1/2" NPT / pneu.: G1/4 Digital I/O Module (DIO) Optionally available with device plug M12 (D coding) Order code: -Z D55 without option module . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, FOUNDATION Fieldbus, Ex/nEx, double acting, aluminum box, explosion-proof (Ex d), for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Explosion-proof enclosure (Ex d), Dust-proof protection by enclosure (Ex t). Thread the.: 1/2" NPT / pneum.: G1/4 Digital I/O Module (DIO), 1 digital input, 3 digital outputs (2 min. or max. limit values, 1 fault warning output) No option module. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable inlets): Aluminum, 2 X M20 x 1.5 Antenna Lens Material: TFM 1600 Flush lens Approvals: Intrinsically Safe: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 Lens material (antenna): TFM 1600 recessed lens Approvals: Intrinsic safety: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

Calibration weight 200g, for Millflo, Sensing head ILE 37/-ILE 61

Calibration weight 200g for Solids Flowmeter WF100, WF200, WF250, and Sensing head WFS300, WFS320, and Weighfeeder WW200

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 3" horn antenna, fits 80 mm or 3" nozzles with 100 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 3" horn antenna, suitable for 80 mm (3") mm with 100 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable input: DC 24 V, 2 x M20 x 1.5 approvals: ATEX II 1/2 D T6, CE, R

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 100 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 100 to 230 V AC, 2 x M20 x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 100 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable entry: AC 100 ... 230 V, 2 x M20 x 1.5 approvals: ATEX II 1/2 D T6, CE, R

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B = 345 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B=345 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 301 ... 350 Initial: 315 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 301 ... 350 Initial: 315 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

Humidity filters as spare parts (10-pack)

Moisture filter as a replacement, pack with 10 units

Manometer, Stainless Steel (3 pieces)

Stainless steel pressure gauge IP54, G1/8, 3 units for SIPART PS2 / PS100 gauge blocks

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) Type N (68 mm) Tuchenhagen Varivent EHEDG only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Non Sparking, ATEX II 3G Ex nA IIC T4 Gc, CE, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Type N (68 mm) Tuchenhagen Varivent EHEDG only Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Increased Safety / Non Sparking: ATEX II 3G Ex ec IIC T4 Gc; UKEX II 3G Ex ec IIC T4 Gc; EAC Ex 2Ex nA IIC T4 Gc X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 2xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Output Module (AOM), optionally available with device plug M12 (D coding) (Order code: -Z D53) . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Order option with fixed connector M12 -Z D53. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Milltronics SF500 A full feature, powerful integrator designed for use with solids flowmeters Input voltage: DC Voltage 10-30V Auxiliary input/ output (required for PID control and on-line calibration): board with 2 analog inputs and 2 analog outputs Feature Software: Standard Auxiliary Memory: none Data Communications: Smartlinx Ready Enclosure: standard enclosure, 4 entries, M20 Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM,RCM,EAC,KCC

Milltronics SF500 Integrator; Advanced multifunction integrator for use with flow meters for granular solids. Input voltage: DC voltage 10-30V Additional outputs / inputs: With 2 outputs and 2 analog inputs. Standard software. No additional memory. Communication: SmartLinx module ready. Box: Standard box, 4 guides, M20 Without permission to use label. Approvals from: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 3" horn antenna, fits 80 mm or 3" nozzles with 200 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 100 to 230 V AC, 2 x M20 x 1.5 Approvals: CSA/FM Class II, Div.1, Gr. E,F,G Class III .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 3" horn antenna, suitable for 80 mm (3") nozzle with 200 mm extension Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: AC 100 ... 230 V, 2 x M20 x 1.5 approvals: CSA/FM Class II, Div. 1, Groups E, F and G Class III

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 1001 ... 1500 Initial:1250 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 1001 ... 1500 Initial: 1250 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt100, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 100 to 230 VAC Number of measurement points: Single point version Data Communications (Smartlinx): Without module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: CSA Class I, Div.2, Group A,B,C and D; Class II, Div.2, Group F and G; Class III

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 100 ... 230 V AC Number of measurement points: Version for one point Data communication (SmartLinx): Without module Output relays: 6 relays (4 A-contacts, 2 C contacts), 250 V AC Approvals: CSA Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2, Groups F and G; Class III

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 3" (80 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 1000 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: General Purpose, CSA US/C, Industry Canada,FCC,CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 3" / 80 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 1000 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x M20 x 1.5 approvals: General Purpose, CSAUS/C, Industry Canada, FCC, CE & R

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: PROFIBUS PA Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: CSA/FM Class II, Div.1, Gr. E,F,G Class III .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") mm Purge connection (self-cleaning): Purge connection Output/communication: PROFIBUS PA Auxiliary power/cable entry: DC 24 V, 2 x M20 x 1.5 approvals: CSA/FM Class II, Div. 1, Groups E, F and G Class III

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles with 100 mm extension Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 24 V DC, 2 x M20 x 1.5 Approvals: CSA/FM Class II, Div.1, Gr. E,F,G Class III .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 4" Horn antenna, suitable for 100 mm (4") nozzle with 100 mm extension Purge connection (self-cleaning): Without purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable input: DC 24 V, 2 x M20 x 1.5 Approvals: CSA/FM Class II, Div. 1, Groups E, F and G Class III

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 6" (150 mm) Antenna: 4" horn antenna, fits 100 mm or 4" nozzles Purge (Self Cleaning) Connection: No Purge connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 100 to 230 V AC, 2 x NPT x 1.5 Approvals: ATEX II 1/2 D T6, CE, RED .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 6" / 150 mm antenna: 4" Horn antenna, suitable for 100 mm (4") mm Purge connection (self-cleaning): No purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable entry: AC 100 ... 230 V, 2 x 1/2" NPT approvals: ATEX II 1/2 D T6, CE, R

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404): DN50 Aseptic/Hygienic clamp according to DIN 11864-3 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Non Sparking, ATEX II 3G Ex nA IIC T4 Gc, CE, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic clamp DN50 connection according to DIN 11864-3 (Form A) Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Increased Safety / Non Sparking: ATEX II 3G Ex ec IIC T4 Gc; UKEX II 3G Ex ec IIC T4 Gc; EAC Ex 2Ex nA IIC T4 Gc X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with free wire ends for converter mounting Average range: -200 to 600Cel; Sensor quantity, type, accuracy 1xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.AA -50 ... 250Cel; Extended measuring range Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia