SIEMENS

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: without approvals Process temperature: Hygienic applications -40 to 150 C Process connection: Tri-Clamp 1" PN16 / 316L Ra<0.8 Micrometer Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: No approvals Process temperature: Sanitary applications -40 ... 150 C process connection: Tri-Clamp 1" PN16/316L Ra <0.8 microns electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: According to DIN 43650 incl. connector with QUICKON quick connection / IP65

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS LR200 Radar level transmitter with polypropylene rod: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries. Enclosure / Cable Inlet: Aluminum, Epoxy painted, 2 x M20 x 1.5, Polypropylene antenna type - (Max. 3 Bar pressure and +80 C): G 1-1/2 inch ((BSPP), EN ISO 228-1) comes with integral 250 mm shield Approvals: Increased Safety, ATEX II 1/2G Ex embia IIC T4 Ga/Gb, CE, RED, RCM; GOST-R Communication / Output: 4-20mA HART, start-up at <3.6mA .

. SITRANS LR200 Radar Level Transmitter with Polypropylene Rod - Continuous, non-contact, 20 m (66 ft) range measurement for liquids and sludge. Field box / cable entry: Epoxy coated aluminium, 2 x M20 x 1.5 Polypropylene antenna (Max. pressure 3 bar and +80 C): G 1 1/2 inches ((BSPP), (EN ISO 228-1), with integrated 250 mm shielding Approvals: Enhanced safety ATEX II 1/2 G Ex embia IIC T4,Ga/Gb, CE, R&TTE;, C-TICK; GOST-R Communication/Output: 4 ... 20 mA, HART, <3.6 mA start

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Stainless steel without inspection window (not Ex d) . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT without limit monitor without option module . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, stainless steel box, without window, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." No limit monitor. No option module. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 200, level, volume, flow and differential measurements Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Single point version Data Communications (Smartlinx): Without module Output relays: 3 relays (2 Form A, 1 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 200 for level, volume, flow and differential level measurement Mounting, enclosure design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of measurement points: Version for one point Data communication (SmartLinx): Without module Output relays: 3 relays (2 A-contacts, 1 C contact), 250 V AC Approvals: Ordinary Locations/ Non-Ex, CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Intrinsically Safe: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Intrinsic safety: NEPSI Ex ia IIC T4 Ga, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double acting; Enclosure aluminum, flame-proof . Type of explosion protection: Explosion proof Connection thread el.: 1/2" NPT / pneu.: G1/4 without limit monitor Analog Output Module (AOM), optionally available with device plug M12 (D coding) (Order code: -Z D53) . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, FOUNDATION Fieldbus, Ex/nEx, double acting, aluminum box, explosion-proof (Ex d), for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Explosion-proof enclosure (Ex d), Dust-proof protection by enclosure (Ex t). Thread the.: 1/2" NPT / tire: G1/4 No limit monitor. Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx PROFIBUS DPVO module Output relays: 3 relays (2 Form A, 1 Form C), 250 V AC Approvals: ATEX II 3D

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of measurement points: Version for one point Data communication (SmartLinx): SmartLinx PROFIBUS DPV0 module Output relays: 3 relays (2 A-contacts, 1 C contact), 250 V AC Approvals: ATEX II 3D

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 200, level, volume, flow and differential measurements Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 100 to 230 VAC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx PROFIBUS DPVO module Output relays: 3 relays (2 Form A, 1 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 200 for level, volume, flow and differential level measurement Mounting, enclosure design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 100 ... 230 V AC Number of measurement points: Version for one point Data communication (SmartLinx): SmartLinx PROFIBUS DPV0 module Output relays: 3 relays (2 A, 1 C contact), 250 V AC Approvals: Ordinary Locations/ Non-Ex, CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

Milltronics SF500 A full feature, powerful integrator designed for use with solids flowmeters Input voltage: DC Voltage 10-30V Auxiliary input/ output (required for PID control and on-line calibration): none Feature Software: Standard Auxiliary Memory: none Data communication: Smartlinx PROFINET IO Enclosure: standard enclosure, 4 entries, M20 Trade approval sticker: No trade approval sticker Approvals: CE, CSA US/C, FM,RCM,EAC,KCC

Milltronics SF500 Integrator; Advanced multifunction integrator for use with flow meters for granular solids. Input voltage: DC voltage 10-30V No additional inputs or outputs. Standard software. No additional memory. Communication: SmartLinx ProfNet Module Box: Standard box, 4 guides, M20 Without permission to use label. Approvals from: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CCSAUS, FM, RCM, EAC, KC

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404): DN50 Aseptic/Hygienic clamp according to DIN 11864-3 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: General Purpose,CE, CSA, FM, FCC, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic clamp DN50 connection according to DIN 11864-3 (Form A) Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CSA, FM, FCC, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class I & 3-A (excludes Tuchenhagen connections) Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) EXCLUDE Process Connection - Electronics Head assembly spare only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: General Purpose,CE, CSA, FM, FCC, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I & 3-A (does not include Tuchenhagen connections) Types of connection to the process (all types have TFM1600 PTFE lens): WITHOUT connection to the process - Only spare (electronic) head assembly Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CSA, FM, FCC, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 151 ... 200 Initial: 200 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 151 ... 200 Initial: 200 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 351 ... 400 Initial: 375 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.AA 0 ... 150Cel; Basic version Length unit of med. (mm): B = 351 ... 400 Initial: 375 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor quantity, type, accuracy 2xPt1000, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 601 ... 700 Initial: 655 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 351 ... 400 Initial: 375 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 351 ... 400 Initial: 375 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): Standard: B = 435 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.1 -40 ... 1000Cel Length unit of med. (mm): Standard: B=435 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 1501 ... 2000 Initial:1700 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1100Cel Length unit of med. (mm): B = 1501 ... 2000 Initial: 1700 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 701 ... 800 Initial: 735 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 701 ... 800 Initial: 735 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: 4 button HMI, Wall mount, 4 entries, 4 M20 cable glands included Input voltage: 100 to 230 VAC Number of measurement points: Dual point model, 6 relays Data Communications: Without module Approvals: General Purpose CE, FM, CSA US/C , UL listed, RCM, EAC, KCC

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Power: 4 button IHM, Wall mount, 4 entries, 4 M20 cable glands included auxiliary power: AC, 100 to 230 V Number of measurement points: two-channel version, 6 relays Data communication (SmartLinx): Without module Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, FM, CCSAUS, UL Listed, RCM, EAC, KC

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection Side: European Design with Ceramic Socket Average Range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 2xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor quantity, type, accuracy 1xPt1000, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 201 ... 250 Initial: 205 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 201 ... 250 Initial: 205 Non-Ex Requirements for EU/Australia

Siemens HydroRanger 200 Ultrasonic level controller for up to six pumps that provides control, differential control and open channel flow monitoring. Mounting: 4 button HMI, Panel Mount Input voltage: 12 to 30 VDC Number of measurement points: Dual point model, 6 relays Data Communications: Smartlinx DevicenetTM module Approvals: General Purpose CE, FM, CSA US/C , UL listed, RCM, EAC, KCC

HydroRanger 200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Power: 4 button IHM, Wall mount, 4 entries, 4 M20 cable glands included auxiliary power: DC, 12 to 30 V Number of measurement points: two-channel version, 6 relays Data communication (SmartLinx): SmartLinx DeviceNet module Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, FM, CCSAUS, UL Listed, RCM, EAC, KC

SITRANS LR200 Radar level transmitter with polypropylene rod: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries. Enclosure / Cable Inlet: Aluminum, Epoxy painted, 2 x M20 x 1.5, Polypropylene antenna type - (Max. 3 Bar pressure and +80 C): G 1-1/2 inch ((BSPP), EN ISO 228-1) comes with integral 250 mm shield Approvals: Flame Proof, ATEX II 1/2G Ex dmbia IIC T4 Ga/Gb, CE, RED, RCM; GOST-R Communication / Output: 4-20mA HART, start-up at <3.6mA .

. SITRANS LR200 Radar Level Transmitter with Polypropylene Rod - Continuous, non-contact, 20 m (66 ft) range measurement for liquids and sludge. Field box / cable entry: Epoxy-coated aluminium, 2 x M20 x 1.5 Polypropylene antenna (Max. pressure 3 bar and +80 C): G 1 1/2 inches ((BSPP), (EN ISO 228-1), with integrated 250 mm integrated shielding Approvals: Explosion-proof enclosure ATEX II 1/2 G Ex dmbia IIC T4, Ga/Gb, CE, R&TTE;, C-TICK; GOST-R, communication/output: 4 ... 20 mA, HART, <3.6 mA start

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with ceramic socket Average range: -40 to 750Cel; Sensor Qty, Type, Accuracy 2xTC J, Cl.1 -40 ... 750Cel Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1000Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.2 -40 ... 1100Cel Length unit of med. (mm): B = 251 ... 300 Initial: 275 Non-Ex Requirements for EU/Australia

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA90 C Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 150A 10K JIS B 2220 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Flameproof: NEPSI Ex d ia mb IIC T4 Ga/Gb, Ex iaD 20 T90 IP67 DIP A20 TA 90 C Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 401 ... 450 Initial: 405 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Basic version Length unit of med. (mm): B = 401 ... 450 Initial: 405 Non-Ex Requirements for EU/Australia

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 100, level measurement Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 12 to 30 VDC Number of measurement points: Single point version Data Communications (Smartlinx): Smartlinx PROFIBUS DPVO module Output relays: 6 relays (4 Form A, 2 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 100 only for level measurement Mounting, box design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 12 ... 30 V DC Number of measurement points: Single point version Data communication (SmartLinx): SmartLinx PROFIBUS DPV0 module Output relays: 6 relays (4 A-contacts, 2 C contacts), 250 V AC Approvals: Ordinary Locations/ Non-Ex, CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

MultiRanger 200 Ultrasonic level controller: continuous, non-contact, 15 m (50 ft) range. Monitors level, volume, and open channel flow in liquids, slurries, and solids. Versions: MultiRanger 200, level, volume, flow and differential measurements Mounting, enclosure design: Wall mount, standard enclosure Input voltage: 100 to 230 VAC Number of measurement points: Dual point version Data Communications (Smartlinx): Without module Output relays: 3 relays (2 Form A, 1 Form C), 250 V AC Approvals: General Purpose, CE, FM,CSA US/C,UL, listed, RCM,EAC,KCC

MultiRanger 100/200 Ultrasonic Level Controller: Continuous, non-contact measurement, range 15 m (50 ft). It monitors the level, volume, and flow in open channel of liquids, sludge, and solids. Versions: MultiRanger 200 for level, volume, flow and differential level measurement Mounting, enclosure design: Standard box for wall mounting Product is in phase out but still available to order, Consider replacing with 7ML5033-xD Input voltage: 100 ... 230 V AC Number of measurement points: Two-point version Data communication (SmartLinx): Without module Output relays: 3 relays (2 contacts A, 1 contact C), 250 V AC Approvals: Ordinary Locations/ Non-Ex, CE, UKCA, FM,CCSAUS, UL Listed, RCM, EAC, KC

Sitrans LR 460: 4-wire, 24 GHz FMCW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (328 ft). Ideal for applications with extreme dust and high temperatures to 200 Cel. (392 F). Order hand programmer separately! . Process connection: Universal, flat faced, 0.5 bar (7.25 psi) maximum with integral Easy Aimer ball: 4" (100 mm) Antenna: 3" horn antenna, fits 80 mm or 3" nozzles with 200 mm extension Purge (Self Cleaning) Connection: Purge Connection . Output/Communication: 4 to 20 mA, HART Power Supply/Cable Inlet: 24 V DC, 2 x NPT x 1.5 Approvals: CSA/FM Class II, Div.1, Gr. E,F,G Class III .

. SITRANS LR460 Radar level transmitter with antenna . Horn: Continuous, non-contact measurement, range 100 m (328 ft), . for tough applications with solids. Process connection: Universal flat flange, 0.5 bar (7.25 psi) maximum with integrated adjustable flange Type EA: 4" / 100 mm antenna: 3" horn antenna, suitable for 80 mm (3") nozzle with 200 mm extension Purge connection (self-cleaning): Purge connection Output/communication: 4 ... 20 mA, HART Auxiliary power/cable entry: DC 24 V, 2 x 1/2" NPT Approvals: CSA/FM Class II, Div. 1, Groups E, F and G Class III

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 801 ... 900 Initial: 825 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 801 ... 900 Initial: 825 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 451 ... 500 Initial: 500 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 451 ... 500 Initial: 500 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 501 ... 550 Initial: 525 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -200 to 600Cel; Sensor Qty, Type, Precision 2xPt100, Cl.B -196 ... 600Cel; Extended measuring range Length unit of med. (mm): B = 501 ... 550 Initial: 525 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 551 ... 600 Initial: 555 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt1000, Cl.A -30 ... 300Cel; Basic version Length unit of med. (mm): B = 551 ... 600 Initial: 555 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 301 ... 350 Initial: 315 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 6 mm Connection side: European design with ceramic socket Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 301 ... 350 Initial: 315 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC K, Cl.2 -40 ... 1000Cel Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for mounting converters Average range: -40 to 1000Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of measurement for SITRANS TS500, mineral insulated design Probe diameter: 10 mm (6 mm cable diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -40 to 1100Cel; Sensor Qty, Type, Accuracy 1xTC N, Cl.1 -40 ... 1000Cel Length unit of med. (mm): B = 85 ... 100 Initial: 100 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): Standard: B = 585 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: European design with free wire ends for converter mounting Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): Standard: B=585 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance to vibrations Length unit of med. (mm): B = 351 ... 400 Initial: 375 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 1xPt100, Cl.B -50 ... 400Cel; Increased resistance Length unit of med. (mm): B = 351 ... 400 Initial: 375 Non-Ex Requirements for EU/Australia

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance to vibrations Length unit of med. (mm): B = 101 ... 150 Initial: 145 Prot. c. expl. (ATEX,IECEx) For EU/Australia Non-Ex Requirements

SITRANS TSinsert Unit of Measurement for SITRANS TS500, Mineral Insulated Design Probe Diameter: 8 mm (6 mm Cable Diameter) Please note: Unit of measurement not replaceable. Connection side: amer design. (nozzle damping) Average range: -50 to 400Cel; Sensor Qty, Type, Accuracy 2xPt1000, Cl.A -30 ... 300Cel; Increased resistance Length unit of med. (mm): B = 101 ... 150 Initial: 145 Non-Ex Requirements for EU/Australia

The SITRANS RD200 is a universal input, panel mount remote digital display for process instrumentation. RD200 12-36 VDC Display with 2 Relays