SIEMENS

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0....15 ftH2O Cable length: 10m (30ft) Stainless steel 904L (1.4539) Protective cap PPE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0....15 ftH2O Cable length: 10m (30ft) 904L stainless steel (1.4539) FKM PPE protection cap (standard) none

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 79", 'A'= 88" (2235 mm) Width's based on belt width: For use with 3" integrated round bar weight (78"-89", 70.4-80.4 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 79", 'A' = 88" (2235 mm) Width according to belt width: For use with integrated 3" round weight (78"-89", 70.4-80.4 kg) Execution: Standard, in steel with Epoxy paint.

Bend Pulley, 8" diameter Belt driven pulley for WS Series speed sensors. Size: 8 inch diameter Belt width / 'A' dimension: 2500 mm, A= 107.9 inch (2740mm) to 110.4 inch (2804 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal diameter Tape width / Dimension "A": 2 500 mm / A = 105.9 mm ... 110.4" (2 690 ... 2 804 mm) Paint: 1.4401 stainless steel with corrosion resistant material bearings Mounting material: Standard

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA; single action; polycarbonate enclosure . without explosion protection Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of a turn. Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive, Intrinsic Safety, Dust Ignition Proof (no cover window) Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Neum.: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

WF100 LOADCELL SPARE 2 LBS

WF100 REPLACEMENT LOAD CELL 2 LBS

Bend Pulley, 8" diameter Belt driven pulley for WS Series speed sensors. Size: 8 inch diameter Belt width / 'A' dimension: 2000 mm, A= 88.2 inch (2240mm) to 90.7 inch (2304 mm) Finish: standard, painted mild steel Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 2 000 mm / A= 86.2 ... 90.7" (2 190 ... 2 304 mm) Paint: Standard, Painted Steel Bearing Mounting: No Mounting Bearings

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...2 bar Cable length: 30m Stainless steel 316L (1.4404) Protective cap ETFE EPDM (for drinking water) with ATEX II1 G Ex ia IIC T4 Ga and IECEx Ex ia IIC T4 Ga

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...2 bar Cable length: 30m Stainless steel 316L (1.4404) ETFE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: 10" ASME flange pattern Flowguide construction: 304 (1.4301) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 10 inch, ASME Type Flange Flow Guide Construction: 304 Stainless Steel (1.4301) Case Construction: 316 Stainless Steel (1.4401).

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; double action; polycarbonate enclosure . without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 6" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: Flameproof: IECEx/ATEX II 1/2 GD 1D, 2D Ex d mb ia IIC T4 Ga/Gb, Ex ia ta IIIC T100 C Da, INMETRO Ex d ia mb IIC T4 Ga/Gb, Ex ia ta IIIC T100 C Da, CE, RED, RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 6" Class 150 ASME B16.5 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Flameproof: ATEX II 1/2 GD, 1D, 2D, Ex db mb ia IIC T4 Ga/Gb; ATEX II 1/2 GD, 1D, 2D, Ex ia ta IIIC T100°C Da; UKEX II 1/2 GD, 1D, 2D, Ex db mb ia IIC T4 Ga/Gb; UKEX II 1/2 GD, 1D, 2D, Ex ia ta IIIC T100°C Da; IECEx Ex db mb ia IIC T4 Ga/Gb, IECEx Ex ia ta IIIC T100°C Da; INMETRO Ex d ia mb IIC T4 Ga/Gb, INMETRO Ex ia ta IIIC T100°C Da, IP67/IP68; EAC Ex Ga/Gb Ex ia/db+mb IIC T4 X, EAC Ex Ex ia ta IIIC T100°C Da; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, painted aluminum, with integral aimer Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 3 bar g (40 psi g) maximum Output/communication: PROFIBUS PA Approvals: ATEX II 1D, 1/2D, 2D, IECEx, 3G Ex nA/nL, CE, RED, RCM Local display interface: With LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, painted aluminum with integrated fixing flange Box (with cable entry): Stainless steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 32", 'A'= 41" (1041 mm) Width's based on belt width: For use with 6" integrated round bar weight (30"-41", 88.2-111.2 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Actuation: Manual Belt width and "A" measurement: 32", 'A' = 41" (1041 mm) Width according to belt width: For use with integrated 6" round weight (30"-41", 88.2-111.2 kg) Execution: Standard, in steel with Epoxy paint.

Milltronics Bend Pulley, 6" diameter with 1/4" lagging Return belt driven pulley provides rotation for shaftdriven speed sensors The lagging offers self-cleaning advantages and ensures positive rotation. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 54", A=63" (1600.2 mm) to 65.5" (1663 mm) Finish: 316 (1.4401) stainless steel with corrosion resistant bearings Bearings: no bearings .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) Material: 1.4401 stainless steel, with mounting piece in stainless material. No mounting piece. .

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 904L (1.4539) Protective cap ETFE EPDM (for drinking water) with ATEX II1 G Ex ia IIC T4 Ga and IECEx Ex ia IIC T4 Ga

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...40 mH2O Cable length: 50m 904L stainless steel (1.4539) EPDM ETFE protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 6 inches diameter Belt width / A dimension: 500 mm, A= 29" (740 mm) to 31.5" (800 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape Width / Dimension ""A"": 500 mm / A= 25.6 ... 29" (650... 740 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6" nominal width)." Mounting piece: Metric dimensions. .

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 250 flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 250 Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 304 Stainless Steel (1.4301) .

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Output Module (AOM), optionally available with device plug M12 (D coding) (Order code: -Z D53) . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Order option with fixed connector M12 -Z D53. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 69", 'A'= 78" (1981 mm) Width's based on belt width: For use with 6" integrated round bar weight (66"-77", 219.0-258.9 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 69", 'A' = 78" (1981 mm) Width according to belt width: For use with integrated 6" round weight (66"-77", 219.0-258.9 kg) Execution: Standard, in steel with Epoxy paint.

WF100 8" (200mm) sensing plate 304 poly

WF100 sensor plate 8" (200mm) 304 steel polyacster coating

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...9 ftH2O Cable length: 10m (30ft) Stainless steel 316L (1.4404) Protective cap ETFE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0...9 ftH2O Cable length: 10m (30ft) Stainless steel 316L (1.4404) ETFE FKM protection cap (standard) none

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,3 bar Cable length: 10m Stainless steel 904L (1.4539) Protective cap PPE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.3 bar Cable length: 10m Stainless steel 904L (1.4539) PPE FKM protection cap (standard) none

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive, Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): DN150 PN10/16 EN 1092-1 type B1 raised face Communication: 4...20mA HART,start-up at <3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2" NPT Antenna Lens Material: TFM 1600 Flush lens Approvals: General Purpose,CE, CSA,FM,FCC, RED,RCM Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): DN150 PN10/16 EN 1092-1 type B1 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, CSA, FM, FCC, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 60", 'A'= 69" (1753 mm) Width's based on belt width: For use with 4" integrated round bar weight (54"-65", 81.5-99.3 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 60", 'A' = 69" (1753 mm) Width according to belt width: For use with integrated 4" round weight (54"-65", 81.5-99.3 kg) Execution: Standard, in steel with Epoxy paint.

Bend Pulley, 8" diameter w/ 1/4" Lagging Belt driven pulley for WS Series speed sensors. The lagging offers self- cleaning advantages and ensures positive rotation Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 1200 mm, A= 56.6" (1440 mm) to 59.2" (1504 mm) Finish: 316 stainless steel Bearings: standard size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 1 200 mm / H= 54.6 mm ... 59.2" (1 387 ... 1 504 mm) Paint: 1.4401 stainless steel Mounting bearing: Standard

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,5 bar Cable length: 10m Stainless steel 904L (1.4539) Housing and protective cap EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.5 bar Cable length: 10m 904L stainless steel (1.4539) EPDM protective housing and hood (for drinking water) none

SITRANS FCT030 Coriolis Flow Transmitter, works with FC MASS 2100, FC300, FCS400 sensors. Suitable for measuring volumetric flow, fractional flow, mass flow, temperature and density of liquids and gases, aluminum casting box. Coriolis Transmitter FCT030 Compact Mount Transmitter Aluminum IP67 / NEMA 4X Canada (CSA) Class I, Zone 1, Zone 21. FC410: z1. FC430 Compact: z1. FCS400 Remote: Z1. FCT030 Field Mount: z1. Cable pass-throughs are not supplied NPT 1/2" thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA active HART. No optional inputs or outputs

SITRANS FCT030 Coriolis Flow Transmitter SITRANS FCT030 Coriolis Flow Transmitter, works with FCS400 and FCS300 sensors. Suitable for measuring volumetric©flow, fractional flow, mass flow, temperature and density of equids and gases, aluminum die-cast box. Coriolis FCT030 transmitter Compact mounting transmitter Aluminum IP67 / NEMA 4X Canada (CSA) Class I Cable pass-through is not supplied NPT 1/2" thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA active HART (Ex). No optional inputs or outputs

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA; single action; polycarbonate enclosure . without explosion protection Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of a turn. Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . without explosion protection Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 42", 'A'= 51" (1295 mm) Width's based on belt width: For use with 3" integrated round bar weight (42"-53", 37.7-44.5 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 42", 'A' = 51" (1295 mm) Width according to belt width: For use with integrated 3" round weight (42"-53", 37.7-44.5 kg) Execution: Standard, in steel with Epoxy paint.

Milltronics Bend Pulley, 6" diameter with 1/4" lagging Return belt driven pulley provides rotation for shaftdriven speed sensors The lagging offers self-cleaning advantages and ensures positive rotation. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 1450 mm, A= 66.5" (1690 mm) to 69.0" (1754 mm) Finish: 316 (1.4401) stainless steel with corrosion resistant bearings Bearings: Imperial size .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. Tape width / Dimension ""A"": 1 450 mm / A= 64.5 ... 69.0" (1 638 ... 1 754 mm) Material: 1.4401 stainless steel, with mounting piece in stainless material. Mounting piece: Standard. .

Milltronics MLC Belt Scale: Low-capacity scale for light belt loading that comes complete with a weighing idler. A calibration weight needs to be ordered as a seperate item. Belt width/Scale construction stainless steel 304 (1.4301): 18" (457 mm) Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 1.90" (48.2 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Workmanship: 457 mm. in stainless steel 1.4301. Load cell: 20 lbs, in stainless steel. Roll Dimensions: 1.90" (48.2 mm)

Bend Pulley, 8" diameter Belt driven pulley for WS Series speed sensors. Size: 8 inch diameter Belt width / 'A' dimension: 54 inch, A=63 inch (1600.2 mm) to 65.5 inch (1663 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) paint: steel painted with corrosion-resistant material mounting bearing material: without mounting bearings

CLS100 plugged discharge chute retrofit kit (inlcudes CLS100, material hood)

CLS100 plugged discharge chute retrofit kit (including CLS100, hood material)

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 36", A=45" (1143 mm) to 47.5" (1206 mm) Finish: standard, polyester painted mild steel Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 4.5", self-cleaning." "Tape Width / Dimension ""A"": 36" / A= 41.6 ... 47.5" (1 055 ... 1 206 mm) Painted steel. Mounting piece: Standard. .

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA with HART-interface; single action; Enclosure Aluminium . without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA; single action; Enclosure Aluminium . without explosion protection Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread Size: 1/2" NPT/Tyre: G1/4 Mechanic Limit Switches (MLS), 2 Mechanical Limit Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR560: A 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids and liquids to a range of 100 m (329ft) Order hand programmer separately! Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, 304 stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.5 psi g) maximum Output/communication: PROFIBUS PA Approvals: ATEX II 1D, 1/2D, 2D, IECEx, 3G Ex nA/nL, CE, RED, RCM Local display interface: With LDI (local display interface)

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, 304 stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Accessory SITRANS FCS400 Heating Jacket DN50 electric including HT41 Controller 115 V AC

SITRANS FCS400 accessory Heating jacket DN50 electric including HT41 Controller 115 V AC

F78MP,SPARE,LID LID WITH WINDOW

F78MP, SPARE ASM, LID WITH WINDOW

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...40 mH2O Cable length: 50m Stainless steel 904L (1.4539) Housing and protective cap FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...40 mH2O Cable length: 50m 904L stainless steel (1.4539) FKM protective housing and cap (standard) none

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 6 inches diameter Belt width / A dimension: 500 mm, A= 29" (740 mm) to 31.5" (800 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape Width / Dimension ""A"": 500 mm / A= 25.6 ... 29" (650... 740 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6" nominal width)." No mounting piece. .

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 250 flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 250 Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 316 Stainless Steel (1.4401) .

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Output Module (AOM), optionally available with device plug M12 (D coding) (Order code: -Z D53) . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Order option with fixed connector M12 -Z D53. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)