SIEMENS

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) paint: stainless steel 1.4401 with corrosion-resistant material bearings mounting material: standard

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...12 ftH2O Cable length: 10m (30ft) Stainless steel 904L (1.4539) Protective cap ETFE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...12 ftH2O Cable length: 10m (30ft) 904L stainless steel (1.4539) ETFE FKM protection cap (standard) none

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 40 t/h max. design capacity Flowguide size: DN 250 flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 40 t/h (44 STPH), max. rated capacity. Flow Guide Size: DN 250 Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Case Construction: 316 Stainless Steel (1.4401) .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of a turn. Standard No explosion protection. "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, FOUNDATION Fieldbus, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Device plug M12 (A coding) for electronics, ¼‑18 NPT. The cable socket M12 can be ordered separately with 6DR4004-5A. Without limit monitor. Without option module. . Brief instructions English / German / Chinese. Standard / Fail-Safe - Depressurizing the actuator in case of failure of electrical auxiliary power (single acting only). Without Manometer block / Venting gauge block / Booster.

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. M12 fixed connector (A coding) for electronics, 1/4-18 NPT. The M12 overhead connector can be ordered separately with 6DR4004-5A. No limit monitor. No option module. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 4" / 100 mm, 304 stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 4" / 100 mm, 304 stainless steel Box (with cable entry): Stainless steel, 1 X M20 x 1.5 (includes plastic cable gland). Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 6.5 inch diameter. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 42" / A= 48 … 53.5" (1 219 … 1359 mm) Finish: 316 (1.4401) stainless steel with corrosion resistant bearings Bearings: Imperial size .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 42" / A= 48 ... 53.5" (1 219 … 1359 mm) Material: 1.4401 stainless steel, with mounting piece in stainless material. Mounting piece: Standard. .

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 2 000 mm / A= 86.2 ... 90.7" (2 190 ... 2 304 mm) Finish: 316 stainless steel Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 2 000 mm / A= 86.2 ... 90.7" (2 190 ... 2 304 mm) paint: stainless steel 1.4401 mounting bearing: metric units

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 1 600 mm / A= 70.4 ... 74.9" (1 788 ... 1 904 mm) Finish: standard, painted mild steel Bearings: standard size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 1 600 mm / A = 70.4 mm ... 74.9" (1 788 ... 1 904 mm) Paint: Standard, Painted Steel Bearing Mounting: Standard

WS300 CIRCUIT CARD, WITH ENCODER, 256PPR, 10 INT

Printed circuit board 256 PPR, max. 10 integrators

SITRANS FCT030 Coriolis Flow Transmitter, works with FC MASS 2100, FC300, FCS400 sensors. Suitable for measuring volumetric flow, fractional flow, mass flow, temperature and density of liquids and gases, aluminum casting box. Coriolis Transmitter FCT030 Compact Mount Transmitter Aluminum IP67 / NEMA 4X ATEX II 2GD (Zone 1; Zone 21) FC410: z1/z21. FC430 Compact: z1/z21. FCS400 Remote: z1/z21. FCT030 Field mounting: z1/z21. AISI 316 Cable Pass NPT 1/2" Thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA HART active. No optional inputs or outputs

SITRANS FCT030 Coriolis Flow Transmitter SITRANS FCT030 Coriolis Flow Transmitter, works with FCS400 and FCS300 sensors. Suitable for measuring volumetric©flow, fractional flow, mass flow, temperature and density of equids and gases, aluminum die-cast box. Coriolis FCT030 transmitter Compact mounting Aluminum IP67 / NEMA 4X ATEX II 2GD AISI 316 cable grommet NPT 1/2" thread Power supply: 24VAC/DC - 230VAC 50/60 Hz IP67 / NEMA 4X Version without display Standard software (transmitter) Current output 4-20 mA active HART (Ex). No optional inputs or outputs

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 200 flange pattern Flowguide construction: 304 (1.4301) stainless steel Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 200 Type Flange Flow Guide Construction: 304 Stainless Steel (1.4301) Case Construction: 304 Stainless Steel (1.4301) .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread Size: 1/2" NPT / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 3" / 80 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X M20 x 1.5 (plastic gland included) .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 3" / 80 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X M20 x 1.5 (includes plastic cable gland). Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 94", 'A'= 103" (2616 mm) Width's based on belt width: For use with 4" integrated round bar weight (90"-96", 139.6-149.3 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 94", 'A' = 103" (2616 mm) Width according to belt width: For use with integrated 4" round weight (90"-96", 139.6-149.3 kg) Execution: Standard, in steel with Epoxy paint.

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: ordinary location, CE Version/Process Temperature: Extended -40 to 150 C Process connection: Thread R3/4 PN64, EN10226-1 / 316L Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: Acc. to DIN43650 incl. plug with QuickOn connection / IP65 . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Without approvals Process temperature: Advanced -40 ... 150 C Thread R3/4 PN64, EN10226-1 / 316L electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: According to DIN 43650 incl. connector with QUICKON quick connection / IP65

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 60" / A= 67 ... 71.5" (1 701 ... 1 816 mm) Finish: Epoxy painted Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 60" / A= 67 ... 71.5" (1 701 ... 1 816 mm) "Paint: Epoxy (only for 6" nominal width)." No mounting piece. .

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: 8" ASME flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 8 inch, ASME Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Case Construction: 304 Stainless Steel (1.4301).

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese. Manometer block aluminumG¼, double-acting with plastic manometer IP31 (MPa, bar).

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e), Dust ignition protection by enclosure (Ex t). Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2 200 mm / A= 94.1 ... 98.6" (2 390 ... 2 504 mm) Finish: 316 stainless steel Bearings: no bearings .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 2 200 mm / H= 94.1 mm ... 98.6" (2 390 ... 2 504 mm) paint: stainless steel 1.4401 mounting bearing: without mounting bearings

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404) DN50 Aseptic/Hygienic flanged to DIN 11864-2 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets): Aluminum, 2 X M20 x 1.5 A: Approvals: Explosion proof:CSA/FM Class I, II and III, Div.1, Groups A,B,C,D,E,F,G FCC, Industry Canada Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Aseptic/hygienic flanged connection DN50 according to DIN 11864-2 Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X M20 x 1.5 A: Approvals: Explosion-proof: CSA/FM Class I, II & III, Div. 1, Groups A,B,C,D,E,F,G, FCC Industry Canada Pressure: See pressure/temperature reduction curves in the service instructions

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 78" / A= 85 ... 89.5" (2 159 ... 2 273 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 78" / A= 85 ... 89.5" (2 159 ... 2 273 mm) paint: steel painted with corrosion-resistant material mounting bearing material: without mounting bearings

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...30 ftH2O Cable length: 20m (60ft) Stainless steel 316L (1.4404) Protective cap PPE EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...30 ftH2O Cable length: 20m (60ft) Stainless steel 316L (1.4404) EPDM PPE protection cap (for drinking water) none

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,5 bar Cable length: 10m Stainless steel 316L (1.4404) Housing and protective cap FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.5 bar Cable length: 10m Stainless steel 316L (1.4404) FKM protective housing and cap (standard) none

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Not in combination with pressure sensor option P01/P02. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. ..

SIPART PS2 Intelligent electro-pneumatic position controller, 4...20mA, HART, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Not related to P01/P02 pressure sensor option. Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Venting gauge block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): No LDI (User Interface)

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal Diameter Tape Width / Dimension "A": 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) paint: stainless steel 1.4401 with corrosion-resistant material bearings mounting material: metric units

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Class 1 Process Connection Types: 316L st/st (1.4435 or 1.4404) (all types have TFM1600 PTFE lens) Type F (50 mm) Tuchenhagen Varivent EHEDG only Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Explosion proof:CSA/FM Class I, II and III, Div.1, Groups A,B,C,D,E,F,G FCC, Industry Canada Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL Class I Process connection types (all types have TFM1600 PTFE lens): 316L stainless steel (1.4435 or 1.4404): Type F (50 mm) Tuchenhagen Varivent EHEDG only Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Explosion proof: CSA/ FM Class I, II & III, Div. 1, Groups A,B,C,D,E,F,G, FCC Industry Canada Pressure: See pressure/temperature reduction curves in the service instructions

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 1 200 mm / A= 54.6 ... 59.2" (1 387 ... 1 504 mm) Finish: standard, polyester painted mild steel Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape width / Dimension ""A"": 1 200 mm / A= 54.6 ... 59.2" (1 387 ... 1 504 mm) Painted steel. Mounting piece: Metric dimensions. .

Sitrans AS100: acoustic sensor for flow detection. It can warn of changes to material flow to prevent costly damage or downtime. Sensor: Extended temperature range (-40 C to +125 C) Cable length: 4 meters (13.12 ft) Sensor mounting: Mounting tab . Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC

Acoustic sensor for monitoring the correct operation of processes, model Senaco AS100 from Siemens Milltronics, with: Extended temperature range: -40 to + 85 Cel, (only with type 1 certification). Cable length: 4 m. With extender. . Certification: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, EAC, KC

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions English / German / Chinese. Without Manometer block / Booster..

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i), Increased safety (Ex e). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 100m (328 ft) max range, -40 C degrees to +200 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 3" / 80 mm, 304 stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT .

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measuring range and process temperature 100 m max range, -40 ... +200 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 3" / 80 mm, 304 stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 3 bar g (40 psi g) max. Output/Communications: 4 ... 20 mA, HART Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 6.5 inch diameter. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 42" / A= 48 … 53.5" (1 219 … 1359 mm) Finish: 316 (1.4401) stainless steel with corrosion resistant bearings Bearings: metric bearings .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 42" / A= 48 ... 53.5" (1 219 … 1359 mm) Material: 1.4401 stainless steel, with mounting piece in stainless material. Mounting piece: Metric dimensions. .

SITRANS LVL100 Vibrating point level switch. Detects level and material in liquids and slurries. Compact, with 40 mm (1.6 inch) insertion. Approvals: Overfill protection (WHG) Version/Process Temperature: Hygienic applications -40 to 150 C Process connection: Thread R1 PN64, EN10226-1 / 316L (Ra<0.8 Micrometer) Electronics: Transistor output PNP 10...55 V DC Housing: 316L Electrical connection / Protection: M12x1 incl. 5 m cable / IP68(0.2bar) . .

. SITRANS LVL100 Vibratory Level Switch. Detects the . level of liquid materials and sludge. Compact, with insertion length 40 mm (1.6 inch). Approvals: Overflow safety according to WHG process temperature: Sanitary applications -40 ... 150 C Thread R1 PN64, EN10226-1 / 316L (Ra<0.8 micrometer) electronics: PNP DC transistor output 10...55 V Box: 316L Electrical connection/ degree of protection: M12x1 incl. 5 m cable / IP68 (0.2 bar)

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) Finish: standard, painted mild steel Bearings: standard size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / Dimension "A": 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) Paint: Standard, Painted Steel Bearing Mounting: Standard

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...1 mH2O Cable length: 5m Stainless steel 904L (1.4539) Protective cap PPE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...1 mH2O Cable length: 5m 904L stainless steel (1.4539) PPE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Side mount, 40 t/h max. design capacity Flowguide size: DN 50 flange pattern Flowguide construction: 304 (1.4301) stainless steel Cabinet construction: mild steel, polyester painted .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Side mounted, 40 t/h (44 STPH), max. rated capacity Flow Guide Size: DN 50 Type Flange Flow Guide Construction: 304 Stainless Steel (1.4301) Case Construction: Mild Steel Painted with C5-M Rated Polyester Paint.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids and slurries in the chemical industry. Process Connection Material:Stainless steel 1.4404/1.4435 Flanged Process Connection Types (Stainless steel 1.4404/1.4435): 4" Class 150 ASME B16.5 raised face Communication: 4...20mA HART,start-up at <3.

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids and slurries in chemical industry applications. Material, process connection: Stainless steel 1.4404/1.4435 Types of flanged process connection (stainless steel 1.4404/1.4435): 4" Class 150 ASME B16.5 with highlight Communications: 4...20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2" NPT Lens material (antenna): TFM 1600 recessed lens Approvals: Intrinsically safe: ATEX II 1G Ex ia IIC T4 Ga, ATEX II 1D Ex ia ta IIIC T100°C Da; UKEX II 1G Ex ia IIC T4 Ga, UKEX II 1D Ex ia ta IIIC T100°C Da; IECEx Ex ia IIC T4 Ga, IECEx 1D Ex ia ta IIIC T100°C Da; INMETRO Ex ia IIC T4 Ga, INMETRO Ex ia ta IIIC T100°C Da, IP67/IP68; EAC Ex 0Ex ia IIC T4 Ga X, EAC Ex 0Ex ia ta IIIC T100°C Da X; CE, UKCA, RED, RCM Pressure: See pressure/temperature reduction curves in the operating instructions