SIEMENS

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 18" / A= 23.6 ... 29.5" (600 ... 749 mm) Finish: standard, polyester painted mild steel Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 18" / A= 23.6 ... 29.5" (600 ... 749 mm) Painted steel. Mounting piece: Metric dimensions. .

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 48", 'A'= 57" (1448 mm) Weight type: None Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Actuation: Manual Belt width and measurement "A": 48", 'A' = 57" (1448 mm) weight type: No Execution: Standard, in steel with Epoxy paint.

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 6 inches diameter Belt width / A dimension: 18", A=27" (685.8 mm), to 29.5" (749 mm) Finish: standard, polyester painted mild steel Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 18" / A= 23.6 ... 29.5" (600 ... 749 mm) Painted steel. No mounting piece. .

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 56", 'A'= 65" (1651 mm) Width's based on belt width: For use with 3" integrated round bar weight (54"-65", 48.6-58.6 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 56", 'A' = 65" (1651 mm) Width according to belt width: For use with integrated 3" round weight (54"-65", 48.6-58.6 kg) Execution: Standard, in steel with Epoxy paint.

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2 000 mm / A= 86.2 ... 90.7" (2 190 ... 2 304 mm) Finish: 316 stainless steel Bearings: metric size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape width / Dimension "A": 2 000 mm / H = 86.2 mm ... 90.7" (2 190 ... 2 304 mm) paint: stainless steel 1.4401 mounting bearing: metric units

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,2 bar Cable length: 5m Stainless steel 316L (1.4404) Protective cap ETFE EPDM (for drinking water) with ATEX II1 G Ex ia IIC T4 Ga and IECEx Ex ia IIC T4 Ga

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.2 bar Cable length: 5m Stainless steel 316L (1.4404) ETFE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Bend Pulley, 8" diameter w/ 1/4" Lagging Belt driven pulley for WS Series speed sensors. The lagging offers self- cleaning advantages and ensures positive rotation Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2000 mm, A= 88.2" (2240mm) to 90.7" (2304 mm) Finish: 316 stainless steel Bearings: no bearings .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape width / Dimension "A": 2 000 mm / H = 86.2 mm ... 90.7" (2 190 ... 2 304 mm) Paint: 1.4401 stainless steel Mounting bearing: No mounting bearings

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,2 bar Cable length: 5m Stainless steel 316L (1.4404) Housing and protective cap FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.2 bar Cable length: 5m Stainless steel 316L (1.4404) FKM protective housing and cap (standard) none

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; FOUNDATION fieldbus operation; double action; Enclosure Aluminium . without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 without option module . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position controller, FOUNDATION Fieldbus, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. No option module. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." "Tape Width / Dimension ""A"": 54" / A= 61 ... 65.5" (1 549 ... 1 663 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6"" nominal width)." Mounting piece: Standard. .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,2 bar Cable length: 5m Stainless steel 316L (1.4404) Housing and protective cap EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixedly mounted cable Measuring range: 0...0.2 bar Cable length: 5m 316L stainless steel (1.4404) EPDM protective housing and cap (for drinking water) none

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 38", 'A'= 47" (1194 mm) Width's based on belt width: For use with 3" integrated round bar weight (30"-41", 26.8-33.6 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and measurement "A": 38", 'A' = 47" (1194 mm) Width according to belt width: For use with integrated 3" round weight (30"-41", 26.8-33.6 kg) Execution: Standard, in steel with Epoxy paint.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, double acting, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) Finish: standard, polyester painted mild steel Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape width / Dimension "A"": 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) Painted steel. Mounting piece: Standard. .

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...3 mH2O Cable length: 10m Stainless steel 904L (1.4539) Protective cap PPE EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0...3 mH2O Cable length: 10m 904L stainless steel (1.4539) PPE EPDM protective cap (for drinking water) none

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 1 600 mm / A= 70.4 ... 74.9" (1 788 ... 1 904 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 1 600 mm / A = 70.4 mm ... 74.9" (1 788 ... 1 904 mm) paint: 1.4401 stainless steel with corrosion-resistant material bearings mounting material: metric units

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,4 bar Cable length: 10m Stainless steel 904L (1.4539) Protective cap ETFE EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.4 bar Cable length: 10m Stainless steel 904L (1.4539) ETFE EPDM protection cap (for drinking water) none

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 1 600 mm / A= 70.4 ... 74.9" (1 788 ... 1 904 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 1 600 mm / A = 70.4 mm ... 74.9" (1 788 ... 1 904 mm) paint: stainless steel 1.4401 with bearings made of corrosion-resistant material mounting material: without mounting bearings

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) Finish: Epoxy painted Bearings: Imperial size .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape width / Dimension "A"": 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) "Paint: Epoxy (only for 6" nominal width)." Mounting piece: Standard. .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, HART, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions Spanish / French / Italian..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, HART, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: G1/4" thread. Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,4 bar Cable length: 10m Stainless steel 904L (1.4539) Housing and protective cap FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic immersion filling level, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...0.4 bar Cable length: 10m 904L stainless steel (1.4539) FKM protective housing and cap (standard) none

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / "A" Dimension: 66" / A= 73 ... 77.5" (1 854 ... 1 968 mm) paint: 1.4401 stainless steel with corrosion resistant material bearings mounting: metric units

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive, Dust Ignition Proof (no cover window) Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Cable entry: 1/2" NPT thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) Finish: 316 stainless steel Bearings: standard size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape Width / Dimension "A": 72" / A= 79 ... 83.5" (2 007 ... 2 121 mm) Paint: 1.4401 stainless steel Bearing mounting: Standard

Bend Pulley, 8" diameter w/ 1/4" Lagging Belt driven pulley for WS Series speed sensors. The lagging offers self- cleaning advantages and ensures positive rotation Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 1800 mm, A= 80.3" (2040mm) to 82.8" (2104 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: standard size .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape width / Dimension "A": 1 800 mm / H = 78.3 mm ... 82.8" (1 989 ... 2 104 mm) Paint: 1.4401 stainless steel with corrosion-resistant material bearings Mounting bearing: Standard

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: 6" ASME flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 6 inch, ASME Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 304 Stainless Steel (1.4301).

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. . Brief instructions Spanish / French / Italian. Without Manometer block / Venting gauge block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive, Dust Ignition Proof (no cover window) Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e), Dust ignition protection by enclosure (Ex t). Connection thread el.: 1/2" NPT / pneu.: G1/4 Without limit monitor. Analog Output Module (AOM), analog position feedback 4 ... 20 mA. Device plug M12 optionally orderable with -Z D53. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese. Standard / Fail-Safe - Depressurizing the actuator in case of failure of electrical auxiliary power (single acting only)..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Enhanced Safety (Ex e), Enclosure Dust Ignition Proof Protection (Ex t). Thread the.: 1/2" NPT / tire: G1/4 No limit monitor. Analog Output Module (AOM), Analog Position Feedback 4 ... 20 mA. Order option with fixed connector M12 -Z D53. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 84", 'A'= 93" (2362 mm) Width's based on belt width: For use with 5" integrated round bar weight (90"-96", 214.6-229.7 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 85", 'A' = 94" (2388 mm) Width according to belt width: For use with integrated 5" round weight (90"-96", 214.6-229.7 kg) Execution: Standard, in steel with Epoxy paint.

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 1 800 mm / A= 78.3 ... 82.8" (1 989 ... 2 104 mm) Finish: 316 stainless steel with corrosion resistant bearings Bearings: no bearings .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape width / Dimension "A": 1 800 mm / H = 78.3 mm ... 82.8" (1 989 ... 2 104 mm) paint: stainless steel 1.4401 with bearings made of corrosion-resistant material mounting bearing: without mounting bearings

SITRANS LR250 Radar level transmitter with encapsulated horn and PTFE lens: continuous, non-contact, 20 m (66 ft) range, for liquids, solids, and slurries. For use in hygienic applications. Hygienic Approvals: EHEDG EL Aseptic Class I Process Connection Types: (all types have TFM1600 PTFE lens)316L: st/st (1.4435 or 1.4404) DN50 Aseptic/Hygienic flanged to DIN 11864-2 (Form A) Communication: 4-20mA HART,start-up at < 3.6mA - Enclosure (with Cable Inlets):Aluminum, 2 X 1/2 inch NPT A: Approvals: Explosion proof:CSA/FM Class I, II and III, Div.1, Groups A,B,C,D,E,F,G FCC, Industry Canada Pressure Rating: Rating per pressure/ temperature curves in instruction manual

SITRANS LR250 Radar Level Transmitter with Encapsulated Horn Antenna and PTFE Lens: Continuous, non-contact, 20 m (66 ft) range measurement for liquids, solids and slurries. For use in hygienic applications. Approvals for hygienic/sanitary requirements: EHEDG EL aseptic Class I Process connection types (all types have TFM1600 PTFE lens): Stainless steel 316L (1.4435 or 1.4404): Aseptic/hygienic flanged connection DN50 according to DIN 11864-2 Communications: 4-20mA HART, start at <3.6mA - Box (with cable entry): Aluminum, 2 X 1/2 inch NPT A: Approvals: Explosion proof: CSA/ FM Class I, II & III, Div. 1, Groups A,B,C,D,E,F,G, FCC Industry Canada Pressure: See pressure/temperature reduction curves in the service instructions

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Increased safety (Ex e). Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions English / German / Chinese. Without Manometer block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Increased Safety (Ex e). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). . Brief instructions Spanish / French / Italian. Without Manometer block / Venting gauge block / Booster..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

SITRANS LR560 Radar level transmitter with flush lens antenna: continuous, non-contact, 100 m (328 ft) range, for general solids applications. Measurement and process temperature range: 40m (131 ft) max range, -40 C degrees to +100 C degrees Process connection: Universal flat-faced flange fits ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Enclosure (with cable inlet): Stainless Steel, 1 X 1/2" NPT . Label: Sitrans LR560 Pressure Rating: 0.5 bar g (7.

SITRANS LR560 Recessed Lens Radar Level Transmitter - continuous, non-contact measurement, 100 m (328 ft) range, for general applications with solids. Measurement range and process temperature: 40 m max. range, -40 ... +100 C Process connection Universal flat face flange compatible with ANSI/DIN/JIS flanges: 6" / 150 mm, 316L stainless steel Box (with cable entry): Stainless steel, 1 X 1/2" NPT. Label: Sitrans LR560 Pressure: 0.5 bar g (7.5 psi g) max. Output/Communications: PROFIBUS PA Approvals: ATEX II 1 D 1/2 D 2 D Ex ta IIIC T139°C Da, ATEX II 3G Ex ic IIC T4 Gc, ATEX II 3G Ex ec IIC T4 Gc; UKEX II 1D 1/2D 2D Ex ta IIIC T139°C Da, UKEX II 3G Ex ic IIC T4 Gc, UKEX II 3G Ex ec IIC T4 Gc; INMETRO Ex nA IIC T4 Gc, INMETRO Ex ta IIIC T139°C Da, IP68; IECEx Ex ec IIC T4 Gc, IECEx Ex ic IIC T4 Gc, IECEx Ex ta IIIC T139°C Da, IP68; CE, UKCA, RED, RCM User Interface (Local): With LDI (User Interface)

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...12 ftH2O Cable length: 10m (30ft) Stainless steel 904L (1.4539) Protective cap PPE EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...12 ftH2O Cable length: 10m (30ft) 904L stainless steel (1.4539) PPE EPDM protective cap (for drinking water) none

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4"" NPT Inductive Limit Switches (ILS), 2 inductive limit switches and 1 digital output. " Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread On: 1/2" NPT/Neume: 1/4" NPT Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 6 inches diameter Belt width / A dimension: 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) Finish: Epoxy painted, with corrosion resistant bearings Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 6""." Tape width / Dimension "A"": 1 000 mm / A= 46.8 ... 51.3" (1 189 ... 1 304 mm) "Paint: Epoxy, with mounting piece in stainless material (only for 6"" nominal width)." Mounting piece: Metric dimensions. .

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 42", A=51" (1295.4 mm) to 53.5" (1358 mm) Finish: 316 (1.4401) stainless steel Bearings: no bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 4.5", self-cleaning." "Tape Width / Dimension Dimension ""A"": 42" / A= 48 ... 53.5" (1 219 … 1359 mm) "Material: 1.4401 stainless steel, with stainless steel mounting piece (in 4.5" versions" only the shaft is made of 1.4401 stainless steel)." No mounting piece. .

V-40, 4X10 Flowguide with air vent Milltronics V Series Flowmeters Compact vertical flow, low- to medium-capacity solid flowmeters for various product sizes,densities, and fluidities,particularly fine powders. A sensing plate, sensing head and integrator are required to complete the system.

V-40, 4X10 Flowguide with air vent Milltronics V Series Flowmeters Compact vertical flow, low- to medium-capacity solid flowmeters for various product sizes,densities, and fluidities,particularly fine powders. A sensing plate, sensing head and integrator are required to complete the system.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Single-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)