SIEMENS

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 150 flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: mild steel, polyester painted .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 150 Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: Mild Steel Painted with C5-M Rated Polyester Paint.

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 65", 'A'= 74" (1880 mm) Width's based on belt width: For use with 6" integrated round bar weight (54"-65", 175.4-215.3 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and measurement "A": 65", 'A' = 74" (1880 mm) Width according to belt width: For use with integrated 6" round weight (54"-65", 175.4-215.3 kg) Execution: Standard, in steel with Epoxy paint.

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...120 ftH2O Cable length: 50m (150ft) Stainless steel 316L (1.4404) Protective cap PPE EPDM (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga and Cl I, Div I, group A, B, C & D T4

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...120 ftH2O Cable length: 50m (150ft) Stainless steel 316L (1.4404) PPE EPDM protection cap (for drinking water) With ATEX II 1G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga, CSA Ex ia IIC T4 Ga & Cl I, Div I, Group A, B, C & D T4

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 66", 'A'= 75" (1905 mm) Weight type: None Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Device Calibration: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Actuation: Manual Belt width and measurement "A": 66", 'A' = 75" (1905 mm) weight type: No Execution: Standard, in steel with Epoxy paint.

Bend Pulley, 8" diameter Belt driven pulley for WS Series speed sensors. Size: 8 inch diameter Belt width / 'A' dimension: 2500 mm, A= 107.9 inch (2740mm) to 110.4 inch (2804 mm) Finish: epoxy painted with corrosion resistant bearings Bearings: metric size .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. Nominal diameter Tape width / Dimension "A": 2 500 mm / A = 105.9 mm ... 110.4" (2 690 ... 2 804 mm) paint: steel painted with corrosion-resistant material mounting bearing material: metric units

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 150 flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 150 Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 316 Stainless Steel (1.4401) .

MULTI 100/200/HYDRO display, non HMI spare

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 75", 'A'= 84" (2134 mm) Weight type: None Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Device Calibration: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Actuation: Manual Belt Width and Measurement "A": 75", 'A' = 84" (2134 mm) Weight Type: No Execution: Standard, in steel with Epoxy paint.

Bend pulleys, 8.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" diameter with 1/4 lagging Belt width / 'A' dimension: 2 500 mm / A= 105.9 ... 110.4" (2 690 ... 2 804 mm) Finish: standard, painted mild steel Bearings: no bearings .

. Direction-Change Pulleys, 8.5 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 8.5 inch diameter. Size: 8" nominal diameter with 1/4" coating Tape width / Dimension "A": 2 500 mm / H = 105.9 mm ... 110.4" (2 690 ... 2 804 mm) Paint: Standard, Painted Steel Bearing Mounting: No Mounting Bearings

Recorder,chart comes with HI/LOW alarms,NTEP

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,2 bar Cable length: 5m Stainless steel 904L (1.4539) Protective cap PPE FKM (standard) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixedly mounted cable Measuring range: 0...0.2 bar Cable length: 5m 904L stainless steel (1.4539) PPE FKM protection cap (standard) none

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...1 mH2O Cable length: 5m Stainless steel 316L (1.4404) Housing and protective cap EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with fixed mounted cable Measuring range: 0...1 mH2O Cable length: 5m Stainless steel 316L (1.4404) EPDM protective housing and cap (for drinking water) none

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction Polyester painted mild steel: (500 mm) 20" Load cell capacity: 10 lb (4.55 kg) Weighing Idler diameter: 2.40" (60 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Execution: 500 mm. in painted steel. Load cell: 10 lbs, in stainless steel. Roller diameter: 60 mm.

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: 16" ASME flange pattern Flowguide construction: 316 (1.4401) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: 16 inch, ASME Type Flange Flow Guide Construction: 316 Stainless Steel (1.4401) Case Construction: 316 Stainless Steel (1.4401) .

Load cell Siwarex WL 270 CP-S SA 5t C3 Ex, Rated Load 5t, Accuracy class C3, not legal for trade, 15m Cable length, 4 Conductor, Material Stainless steel, Type of protection IP68, with explosion protection,

Siwarex WL 270 CP-S SA 5 t C3 Ex load cell, nominal load 5 t, accuracy class C3, non-tarable, connection cable 15 m, 4 conductors, stainless steel material, IP68 enclosure protection degree, with explosion protection, - II 1 G Ex ia IIC T4 - II 1 D Ex iaD 20 T73 degrees C - II 3G Ex nL IIC T4

Transmitters SITRANS LH300 for hydrostatic level measurement, submersible transmitter, two-wire connection, 4...20 mA, measuring cell Al2O3 ceramics (99,6% purity) with fixed mounted cable material Measuring range: 0...0,4 bar Cable length: 10m Stainless steel 904L (1.4539) Housing and protective cap EPDM (for drinking water) without

SITRANS LH300 transmitter for measuring the hydrostatic level of immersion filling, two-wire connection 4...20 mA Al2O3 ceramic measuring cell (99.6% purity) with securely mounted cable Measuring range: 0...0.4 bar Cable length: 10m 904L stainless steel (1.4539) EPDM protective housing and hood (for drinking water) none

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction Polyester painted mild steel: (500 mm) 20" Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 2.40" (60 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Execution: 500 mm. in painted steel. Load cell: 20 lbs, in stainless steel. Roller diameter: 60 mm.

Sitrans WF330 Flowmeters Low- to medium-capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders A sensing plate, sensing head and integrator are required to complete the system. Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 150 flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: 304 (1.4301) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 150 Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Case Construction: 304 Stainless Steel (1.4301).

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 150 flange pattern Flowguide construction: mild steel, polyester painted Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 150 Type Flange Flow Guide Construction: Mild Steel Painted with C5-M Rated Polyester Paint Case Construction: 316 Stainless Steel (1.4401).

Milltronics MLC Belt Scale: Low-capacity scale for light belt loading that comes complete with a weighing idler. A calibration weight needs to be ordered as a seperate item. Belt width/Scale construction stainless steel 304 (1.4301): (450 mm) 18" Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 1.96" (50 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Bandwidth/stainless steel version. 1.4301 (304): (450 mm) 18" Load Cell: 20 lbs, in stainless steel. Roller diameter: 50 mm.

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction stainless steel 304 (1.4301): (450 mm) 18" Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 2.40" (60 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Bandwidth/stainless steel version. 1.4301 (304): (450 mm) 18" Load Cell: 20 lbs, in stainless steel. Roller diameter: 60 mm.

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . Type of explosion protection: Increased Safety / Nonincendive, Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: G1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions German / English / Chinese . with mounted pressure gauge made of plastic, IP31, aluminum block, G1/4 aluminum block, G1/4

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i), Enhanced Safety (Ex e). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, double acting with IP31 plastic pressure gauge (MPa, bar)

SITRANS WF330 Solids flowmeter, general purpose design: impact solids flowmeter for low to medium capacity applications. Accuracy is ± 1 % or better, with capacity up to 300 t/h (330 STPH). Model: Base mount, 300 t/h max. design capacity Flowguide size: DN 150 flange pattern Flowguide construction: 304 (1.4301) stainless steel Cabinet construction: 316 (1.4401) stainless steel .

SITRANS WF330 Bulk Solids Flowmeter, General Purpose Design: Impact Flowmeter for Low to Medium Capacity Applications. Min. accuracy ± 1%, capacity up to 300 t/h (330 STPH). Model : Flat mount, 300 t/h (330 STPH), max. rated capacity. Flow Guide Size: DN 150 Type Flange Flow Guide Construction: 304 Stainless Steel (1.4301) Case Construction: 316 Stainless Steel (1.4401) .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of a turn. Standard No explosion protection. Cable entry: M20 x 1.5 thread. Pneumatic connection: G1/4 thread. Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; double action; Enclosure Aluminium . without explosion protection Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . with mounted pressure gauge made of plastic, IP31, aluminum block, 1/4" NPT aluminum block, 1/4" NPT

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Double-acting 1/4-18 NPT aluminum gauge block with IP31 plastic pressure gauge (MPa, psi)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, double-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. Isolating power supply SITRANS I100 separately orderable (7NG4124-1AA00). ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, double acting, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard No explosion protection. Thread: M20x1.5 / Tyre: 1/4" NPT Mechanic Limit Switches (MLS), 2 Mechanical Limit Value Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Venting gauge block / Booster.

Bend pulleys, 4.5/6 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 4.5 inch or 6 inch diameter. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 48" / A= 55 ... 59.5" (1 397 ... 1 511 mm) Finish: 316 (1.4401) stainless steel Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 4.5", self-cleaning." "Tape Width / Dimension ""A"": 48" / A= 55 ... 59.5" (1 397 ... 1 511 mm) "Material: 1.4401 stainless steel (in 4.5" versions" only the shaft is made of 1.4401 stainless steel)." Mounting piece: Metric dimensions. .

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-,3-,4-wire; 4...20mA; single action; Enclosure Aluminium . without explosion protection Connection thread el.: M20x1.5 / pneu.: G 1/4 Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 Optionally available with device plug M12 (D coding) (Order code: -Z D54). . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. Thread Size: M20x1.5 / Tyre: G 1/4 Inductive Limit Switches (ILS), 2 Inductive Limit Value Switches and 1" Digital Output. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

MWL crank handle assembly galvanized

MWL crank assembly, galvanized

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; polycarbonate enclosure . Type of explosion protection: Intrinsic Safety Connection thread el.: M20x1.5 / pneu.: 1/4" NPT Inductive Limit Switches (ILS) Optionally available with device plug M12 (D coding) Order code: -Z D56 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions German / English / Chinese . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single effect, polycarbonate box, for linear pneumatic actuators and fraction of turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). "Cable entry: M20 x 1.5 thread. Pneumatic connection: 1/4" NPT thread." Inductive Limit Switches (ILS), 2 inductive limit value switches and 1" digital output. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. ..

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Milltronics Bend Pulley, 4.5" and 6" diameter: Return belt driven pulley provides rotation for shaftdriven speed sensors. 4.5" size is self-cleaning. Size: 4,5 inches diameter, self cleaning Belt width / A dimension: 48", A=57" (1447.8 mm) to 59.5" (1511 mm) Finish: 316 (1.4401) stainless steel Bearings: metric bearings .

Direction-Change Pulleys, 4.5/6 inch Design: The pulley driven by the lower belt provides the rotational movement needed for the shaft-driven speed sensors. Available in 4.5 inch and 6 inch diameters. "Size: 4.5", self-cleaning." "Tape Width / Dimension ""A"": 48" / A= 55 ... 59.5" (1 397 ... 1 511 mm) "Material: Stainless steel 1.4401, with mounting piece in stainless material (in 4.5" versions" only the shaft is made of stainless steel 1.4401)." Mounting piece: Metric dimensions. .

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Standard Without explosion protection. Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 optionally orderable with -Z D54. .

SIPART PS2 Intelligent electropneumatic position regulator, 4...20mA (3/4 wires), nEx, single effect, aluminum box, for linear pneumatic actuators and fraction turn. Standard No explosion protection. thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Weighfeeder calibration weight, 15,000g

Bend pulleys, 8 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 8 inch diameter. Size: 8 inch diameter Belt width / 'A' dimension: 1 800 mm / A= 78.3 ... 82.8" (1 989 ... 2 104 mm) Finish: 316 stainless steel Bearings: no bearings .

. Direction-Change Pulleys, 8-inch Design – The lower belt-driven pulley provides the rotational motion needed for the shaft-driven speed sensors. Available in diameter 8 inch. Size: 8 in. nominal diameter Tape width / Dimension "A": 1 800 mm / A= 78.3 ... 82.8" (1 989 ... 2 104 mm) Paint: 1.4401 Stainless Steel Mounting Bearing: No Mounting Bearings

Bend pulleys, 6.5 inch design: return belt driven pulley provides rotation for shaft-driven speed sensors. Available in 6.5 inch diameter. Size: 6" diameter with 1/4" lagging Belt width / A dimension: 36" / A= 41.6 ... 47.5" (1 055 ... 1 206 mm) Finish: 316 (1.4401) stainless steel Bearings: metric bearings .

Direction-Change Pulleys, 6.5 inch Design: The pulley driven by the lower belt provides the rotational motion needed for the shaft-driven speed sensors. Available in 6.5 inch diameter. "Size: 6"", with 1/42" shaft. "Tape Width / Dimension ""A"": 36" / A= 41.6 ... 47.5" (1 055 ... 1 206 mm) Material: Stainless steel 1.4401. Mounting piece: Metric dimensions. .

EchoMax XPS-30 Ultrasonic level transducer: continuous, non-contact, 30 m (98.42 ft) for liquids and solids. Mounting thread and facing: 1 1/2" universal thread Cable length: 30 m (98.43 ft) Flange: JIS10K 6B style Approvals: ATEX II 1D, 2G Ex mb IIC T4 Gb, ATEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; UKEX II 1D, 2G Ex mb IIC T4 Gb, UKEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; IECEx SIR 13.0009X Ex mb IIC T4 Gb, IECEx SIR 13.0009X Ex tb IIIC T135°C Da, Ta = -40°C to +95°C Instruction Manual: Multi-Language Quick Start

EchoMax XPS-30 Ultrasonic Level Sensor: Continuous, non-contact, 30 m (98.42 ft) range, for liquids and solids. "Process connection thread: 1" NPT, with standard coating." Connection cable length: 30 m. Mounting flange: JIS10K 6B. Approvals: ATEX II 1D, 2G Ex mb IIC T4 Gb, ATEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; UKEX II 1D, 2G Ex mb IIC T4 Gb, UKEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; IECEx SIR 13.0009X Ex mb IIC T4 Gb, IECEx SIR 13.0009X Ex tb IIIC T135°C Da, Ta = -40°C to +95°C Instructions manual: Not included.

Echomax XPS-30 Transducer High-frequency ultrasonic transducer designed for a wide variety of liquid and solid applications, for use with approved controllers. Includes integral temperature sensor. 1 1/2" universal thread compatible with 1 1/2" NPT and R 1 1/2" ((BSPT), EN 10226) Measuring range: min. 0.6m (1.97 ft), max. 30m (98.43 ft) Mounting thread and facing: 1 1/2" universal thread Cable length: 50 m (164.04 ft) Flange: 6" ASME style, 150 lb Approvals: ATEX II 2G 1D, FM Class 1 Div 2, SAA Instruction Manual: Multi-Language Quick Start

EchoMax XPS-30 Ultrasonic Level Sensor: Continuous, non-contact, 30 m (98.42 ft) range, for liquids and solids. "Process connection thread: 1" NPT, with standard coating." Connection cable length: 50 m. "Mounting flange: 6"" ANSI." Approvals: ATEX II 1D, 2G Ex mb IIC T4 Gb, ATEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; UKEX II 1D, 2G Ex mb IIC T4 Gb, UKEX II 1D, 2G Ex tb IIIC T135°C Da, Ta = -40°C to +95°C; IECEx SIR 13.0009X Ex mb IIC T4 Gb, IECEx SIR 13.0009X Ex tb IIIC T135°C Da, Ta = -40°C to +95°C Instructions manual: Not included.

Milltronics MWL Weight Lifter A mechanical calibration weight lifter for MSI, MMI, and MUS belt scales. For use with MSI, ensure MSI fabrication option 41 is selected. Actuation: Standard Belt width and "A" dimension: 37", 'A'= 46" (1168 mm) Width's based on belt width: For use with 3" integrated round bar weight (30"-41", 26.8-33.6 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical Calibration System for MSI, MMI, MCS and MUS Belt Scales Performance: Manual Belt width and "A" measurement: 37", 'A' = 46" (1168 mm) Width according to belt width: For use with integrated 3" round weight (30"-41", 26.8-33.6 kg) Execution: Standard, in steel with Epoxy paint.

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 37", 'A'= 46" (1168 mm) Width's based on belt width: For use with 4" integrated round bar weight (30"-41", 42.7-53.7 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Weightlifting Calibration Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and "A" measurement: 37", 'A' = 46" (1168 mm) Width according to belt width: For use with integrated 4" round weight (30"-41", 42.7-53.7 kg) Execution: Standard, in steel with Epoxy paint.

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction Polyester painted mild steel: 48" (1219mm) Load cell capacity: 10 lb (4.55 kg) Weighing Idler diameter: 1.90" (48.2 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Execution: 1,219 mm. in painted steel. Load cell: 10 lbs, in stainless steel. Roll Dimensions: 1.90" (48.2 mm)

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction Polyester painted mild steel: 48" (1219mm) Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 1.90" (48.2 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Execution: 1,219 mm. in painted steel. Load cell: 20 lbs, in stainless steel. Roll Dimensions: 1.90" (48.2 mm)

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. . Brief instructions Spanish / French / Italian.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Mechanic Limit Switches (MLS), 2 Mechanical Limit Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

Milltronics MLC Belt scale: accuracy is ± 0.5 … 1.0 % of totalization over 25 … 100 % operating range with capacity up to 50 t/h (55 STPH). Belt width/Scale construction Polyester painted mild steel: (500 mm) 20" Load cell capacity: 10 lb (4.55 kg) Weighing Idler diameter: 1.96" (50 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Execution: 500 mm. in painted steel. Load cell: 10 lbs, in stainless steel. Roller diameter: 50 mm.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. ..

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Mechanic Limit Switches (MLS), 2 Mechanical Limit Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Output Module (AOM) and Analog Input Module (AIM). The internal position detection is not applied but can be ordered in addition with ‑Z K11 and or K12. Device plug M12 is not available. .

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Mechanic Limit Switches (MLS), 2 Mechanical Limit Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). G1/4 aluminium gauge block, single acting with IP31 plastic pressure gauge (MPa, bar)

SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators; 2-wire; 4...20mA; single action; Enclosure Aluminium . Type of explosion protection: Intrinsic Safety Connection thread el.: 1/2" NPT / pneu.: G1/4 Mechanic Limit Switches (MLS) Qptionally available with device plug M12 (D coding) Order code: -Z D57 Analog Output Module (AOM) and Analog Input Module (AIM) for external position transmitters. Internal potentiometer additionally orderable with -Z K11 . Brief instructions French / Spanish / Italian . without mounted pressure gauge block

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). Thread Size: 1/2" NPT/Tyre: G1/4 Mechanic Limit Switches (MLS), 2 Mechanical Limit Switches and 1 Digital Output. Not suitable for operation with "natural" gas. Analog Output Module (AOM) and Analog Input Module (AIM). It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. M12 fixed connector not available. Separately orderable SITRANS I100 insulating power supply (7NG4124-1AA00). . Short instructions Spanish / French / Italian. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Milltronics MWL Calibration weight lifter: mechanical calibration weight lifter designed for use with MSI, MMI, MCS, and MUS belt scales Actuation: Standard Belt width and "A" dimension: 56", 'A'= 65" (1651 mm) Width's based on belt width: For use with 5" integrated round bar weight (54"-65", 123.7-151.5 kg) Fabrication: Polyester painted mild steel

Milltronics MWL Calibration Weightlifting Device: Mechanical calibration system for MSI, MMI, MCS and MUS belt scales Performance: Manual Belt width and measurement "A": 56", 'A' = 65" (1651 mm) Width according to belt width: For use with integrated 5" round weight (54"-65", 123.7-151.5 kg) Execution: Standard, in steel with Epoxy paint.

SIPART PS2 Smart, electropneumatic positioner, 4...20mA, Ex/nEx, single-acting, aluminum enclosure, for pneumatic linear and part-turn actuators. Non-contacting (wear-free) position detection (NCS). Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: M20x1.5 / pneu.: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit switches and 1 digital output. Not applicable for natural gas applications. Device plug M12 optionally orderable with -Z D57. Analog Input Module (AIM) to connect external position detection systems, e. g. NCS Sensor, Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. . Brief instructions English / German / Chinese.

SIPART PS2 Intelligent electro-pneumatic position regulator, 4...20mA, Ex/nEx, single act, aluminum box, for linear pneumatic actuators and fraction turn. Non-contact position detection (NCS) (wear-free). Standard Protection Mode (Ex): Intrinsic Safety (Ex i). SITRANS I200 Output Isolator, can be ordered separately (7NG4131-1AA00). thread the.: M20x1.5 / pneume: G 1/4 Mechanic Limit Switches (MLS), 2 mechanical limit value switches and 1 digital output. Not suitable for operation with "natural" gas. Analog Input Module (AIM) for connecting external position detection systems, e.g. an NCS sensor, a Position Transmitter 6DR4004-1ES/2ES/3ES/4ES or other sensors. It does not have internal position detection, although it can be ordered with -Z K11 and or K12 if required. Order option with fixed connector M12 -Z D54. . Short instructions English/German/Chinese. Standard / Fail-Safe - Purge actuator in case of auxiliary power failure (single effect only). Without Pressure Gauge Block / Booster.

Milltronics MLC Belt Scale: Low-capacity scale for light belt loading that comes complete with a weighing idler. A calibration weight needs to be ordered as a seperate item. Belt width/Scale construction stainless steel 304 (1.4301): (1200 mm) 47" Load cell capacity: 20 lb (9.09 kg) Weighing Idler diameter: 2.40" (60 mm)

Milltronics MLC Belt Scale: Accuracy ± 0.5 ... 1.0% of the total weight, measuring range 25 ... 100%, capacity up to 50 t/h (55 STPH). Width of the tape / Workmanship: 1,200 mm. in stainless steel 1.4301. Load cell: 20 lbs, in stainless steel. Roller diameter: 60 mm.