PANASONIC ER-F12 ER-F12 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

ER-F12 PANASONIC Fan type Ionizer

Reference: ER-F12

Manufacturer: PANASONIC

Description:

ER-F12_Fan Type Ionizer_Fan Type Ionizer ER-F_Standard fan type

Categories:

  • PANASONIC > Ionizers - PANASONIC > Fan type ionizer - PANASONIC

Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Product NumberER-F12
Part NumberER-F12
ProductFan Type Ionizer
DetailsStandard fan type
Product nameFan Type Ionizer ER-F

ItemSpecifications
Product NumberER-F12
Part NumberER-F12
Charge removal time1 sec. approx. (plus or minus1,000 V to plus or minus100 V)
(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
Ion balanceplus or minus10 V or less
(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
Supply voltage24 V DC plus or minus10%
Current consumption700 mA or less
Discharge methodHigh-frequency AC method
Discharge output voltageplus or minus 2 kV approx.
Max. fan speed5.3 m/s
(Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
Max. fan volume3.68 m3/min
Main functionsError output, Discharge halt input
IndicatorsDischarge error (Red), Fan error (Red), Power (Green), Discharge (Green)
Ozone generation0.04 ppm or less
(Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
Ambient temperature0 to +50degrees +32 to +122degrees Fahrenheit (No dew condensation) , Storage: –10 to +65degrees +14 to +149degrees Fahrenheit
Ambient humidity35 to 65% RH (No dew condensation) , Storage: 35 to 65% RH
Grounding methodC (capacitor) grounding
MaterialEnclosure: ABS, Louver: ABS, Discharge needle unit: PBT, Discharge needle: Tungsten, Bracket: SPHC
WeightMain unit: 790 g approx.
AccessoriesStraight louver: 1 pc. (Note), Angle louver: 1 pc., Caution label: 1 set, Rubber cushion: 1 pc.
(Note) The discharge needle unit is loaded on the straight louver before shipment.

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.