F3S-TGR-N_R Safety door switches Reed non-contact switches for monitoring the status of guarding doors Reed non-contactswitches monitor the status of guarding doors. Stainless steel housing for high hygiene demands in the food industry are available. • Based on reed technology • Connect up to 6 switches in series • Operates with all Omron safety controllers • Operates behind stainless steel fittings • Non-contact – no abrasion – no particles • Compensation of mechanical tolerances • Suitable for high pressure cleaning, CIP/SIP processes due IP69K (pre-wired types) • Conforms to safety categories up PLe acc. EN ISO13849-1 Ordering information Polyester housing TypeCable connection Contact configuration Order code Elongated sensors5 m pre-wired2NC/1NO*1 F3S-TGR-NLPR-21-05 10 m pre-wired F3S-TGR-NLPR-21-10 M12, 8-pin F3S-TGR-NLPR-21-M1J8 Small sensors 5 m pre-wired F3S-TGR-NSPR-21-05 10 m pre-wired F3S-TGR-NSPR-21-10 M12, 8-pin F3S-TGR-NSPR-21-M1J8 Miniature sensors 5 m pre-wired*2 2NC/1NO*3 F3S-TGR-NMPR-21-05 10 m pre-wired*2F3S-TGR-NMPR-21-10 M12, 8-pin*2 F3S-TGR-NMPR-21-M1J8 Barrel sensors 5 m pre-wired F3S-TGR-NBPR-21-05 10 m pre-wired F3S-TGR-NBPR-21-10 M12, 8-pin F3S-TGR-NBPR-21-M1J8 *12NC: 1 A, 250 VAC/1NC: 0.2 A, 24 VDC *2Optional cable exit to the right side is available for F3S-TGR-NMPR-types. Pleaseadd “-R” to the order code (i.e. F3S-TGR-NMPR-21-05-R) *32NC: 0.5 A, 24 VDC/1NC: 0.2 A, 24 VDC Stainless steel housing TypeCable connection Contact configuration Order code Elongated sensors5 m pre-wired2NC/1NO*1 F3S-TGR-NLMR-21-05 10 m pre-wired F3S-TGR-NLMR-21-10 M12, 8-pin F3S-TGR-NLMR-21-M1J8 Small sensors 5 m pre-wired F3S-TGR-NSMR-21-05 10 m pre-wired F3S-TGR-NSMR-21-10 M12, 8-pin F3S-TGR-NSMR-21-M1J8 Barrel sensors 5 m pre-wired2NC/1NO*2 F3S-TGR-NBMR-21-05 10 m pre-wired F3S-TGR-NBMR-21-10 M12, 8-pin F3S-TGR-NBMR-21-M1J8 *12NC: 1 A, 250 VAC/1NC: 0.2 A, 24 VDC *22NC: 0.5 A, 24 VDC/1NC: 0.2 A, 24 VDC 442 F3S-TGR-N_R Safety door switches Hygienic and food types TypeCable connection Contact configuration Order code Small sensors 5 m pre-wired2NC/1NO*1 F3S-TGR-NSHR-21-05 10 m pre-wired F3S-TGR-NSHR-21-10 M12, 8-pinF3S-TGR-NSHR-21-M1J8 Small sensors (Special food type) 5 m pre-wiredF3S-TGR-NSFR-21-05 10 m pre-wired F3S-TGR-NSFR-21-10 M12, 8-pinF3S-TGR-NSFR-21-M1J8 Miniature sensors 5 m pre-wired*2 2NC/1NO*3 F3S-TGR-NMHR-21-05 10 m pre-wired*2F3S-TGR-NMHR-21-10 M12, 8-pin*2F3S-TGR-NMHR-21-M1J8 *12NC: 1 A, 250 VAC/1NC: 0.2 A, 24 VDC *2Optional cable exit to the right side is available for F3S-TGR-NMHR-types. Please add “-R” to the order code (i.e. F3S-TGR-NMHR-21-05-R *32NC: 0.5 A, 24 VDC/1NC: 0.2 A, 24 VDC Specifications Mechanical data ItemModel Plastic housing Stainless steel housing Serial switchingup to 6 pcs. Operating distance OFF ON (Sao) 10 mm Close ON OFF (Sar)20 mm* Open Actuator approach speedMin. Max. 4 mm/s 1,000 mm/s Operating temperature ––25 to 80°C–25 to 105°C Enclosure protection Flying lead M12 connector IP69K IP67 Material cable Flying leadPVC, Ø 6 mm o.d. M12 connector250mm,PVC, Ø 6 mm o.d. Material housing –Black polyesterStainless steel 316 * max. 22 mm, depends on the type Electrical data ItemModel Plastic housing Stainless steel housing Indicator LED none Contact release time Max. 2 ms Initial contact resistance Max. 500 m Switching currentMin.1 mA, 10 VDC Approved standards EN standards certified by TÜV Rheinland EN ISO13849-1 EN 60204-1 EN 62061 EN/IEC 60947-5-3 UL 508,CSA C22.2 BS 5304 EN 1088-1 conformance 443 F3S-TGR-N_R Safety door switches Accessories Order code Cables 8-pin 2 m Y92E-M12PURSH8S2M-L 5m Y92E-M12PURSH8S5M-L 10 m Y92E-M12PURSH8S10M-L 25 m Y92E-M12PURSH8S25M-L Actuators for F3S-TGR-NLPR F39-TGR-NLPR-A for F3S-TGR-NSPR F39-TGR-NSPR-A for F3S-TGR-NMPRF39-TGR-NMPR-A for F3S-TGR-NCPRF39-TGR-NCPR-A for F3S-TGR-NWPRF39-TGR-NWPR-A for F3S-TGR-NBPR F39-TGR-NBPR-A for F3S-TGR-NLMR F39-TGR-NLMR-A for F3S-TGR-NSMR F39-TGR-NSMR-A for F3S-TGR-NBMR F39-TGR-NBMR-A for F3S-TGR-NSHRF39-TGR-NSHR-A for F3S-TGR-NSFR F39-TGR-NSFR-A for F3S-TGR-NMHR F39-TGR-NMHR-A Mounting screwsSet of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm incl. washers and Torx bit) F39-TGR-N-SCREWS Spacer (8 mm, Set of 2pcs.)*1 for elongated sensors F39-TGR-NLR-SPACER for small sensors F39-TGR-NSR-SPACER for miniature sensorsF39-TGR-NMR-SPACER for long sensorsF39-TGR-NLR-SPACER for wide sensorsF39-TGR-NWR-SPACER *1Spacers are needed to prevent influences if switch is mounted on ferromagnetic background (e. g. reduced switching distance, EMC influences) Wiring examples (Single head connection) G9SA Single sensor application with G9SA-301 (up to PLe acc. EN ISO 13849-1) +24V GND Start Magnetic actuator F3S-TGR-NxxR Sensor yellow green Auxiliary output for indication (option) A1 A2 T31 G9SA-301 Feed- back- loop KM1 KM2 black white red blue T22 T21 T12 T11 T32 KM1 13 14 33 34 KM2 KM1KM2 +UsM GND 444
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.