Proximity Sensor Ideal for High Temperatures and Cleaning Processes E2EH CSM_E2EH_DS_E_5_1 Proximity Sensor Ideal for the Food and Beverage Industry –SUS316L Body, IP69K Protection, Resistant to High Temperatures and Detergents– Improved resistance to detergents and rusting Applicable to 120°C (with DC 3-wire connection) (Heat resistance verified to 1,000 hours.) Resists typical detergents and disinfectants used in the food industry Water resistant under high-temperature, high-pressure cleaning based on DIN 40050-9. (Pressure: 8,000 to 10,000 kPa, Water temperature: 80°C, For 30 s at all angles) For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 9. Ordering Information Sensors [Refer to Dimensions on page 10.] Pre-wired Models AppearanceSensing distance Output configuration Operation mode: NO Operation mode: NC DC 2-wire (polarity)E2EH-X3D1 2ME2EH-X3D2 2M DC 2-wire (no polarity) * E2EH-X3D1-T 2M --- Shielded M12 M18 M30 3 mm 7 mm 12 mm DC 3-wire (PNP) E2EH-X3B1 2ME2EH-X3B2 2M DC 3-wire (NPN)E2EH-X3C1 2ME2EH-X3C2 2M DC 2-wire (polarity)E2EH-X7D1 2ME2EH-X7D2 2M DC 2-wire (no polarity) * E2EH-X7D1-T 2M --- DC 3-wire (PNP) E2EH-X7B1 2ME2EH-X7B2 2M DC 3-wire (NPN)E2EH-X7C1 2ME2EH-X7C2 2M DC 2-wire (polarity)E2EH-X12D1 2ME2EH-X12D2 2M DC 2-wire (no polarity) * E2EH-X12D1-T 2M --- DC 3-wire (PNP) E2EH-X12B1 2ME2EH-X12B2 2M DC 3-wire (NPN)E2EH-X12C1 2ME2EH-X12C2 2M Connector Models (M12) AppearanceSensing distance Output configuration Operation mode: NO Operation mode: NC DC 2-wire (polarity)E2EH-X3D1-M1G E2EH-X3D2-M1G Shielded M12 M18 M30 3 mm 7 mm 12 mm DC 3-wire (PNP)E2EH-X3B1-M1E2EH-X3B2-M1 DC 3-wire (NPN)E2EH-X3C1-M1E2EH-X3C2-M1 DC 2-wire (polarity)E2EH-X7D1-M1G E2EH-X7D2-M1G DC 3-wire (PNP)E2EH-X7B1-M1E2EH-X7B2-M1 DC 3-wire (NPN)E2EH-X7C1-M1E2EH-X7C2-M1 DC 2-wire (polarity)E2EH-X12D1-M1G E2EH-X12D2-M1G DC 3-wire (PNP)E2EH-X12B1-M1E2EH-X12B2-M1 DC 3-wire (NPN)E2EH-X12C1-M1E2EH-X12C2-M1 *When using a no-polarity model, there is no need to be concerned about whether to connect to the positive or negative side of the power supply. The load can be connected to either the +V side or 0 V side. 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.