No products
Product successfully added to your shopping cart
Networks+Wireless passive
In the industrial automation landscape, Networks and Wireless Passive components form the invisible backbone that ensures reliable data transmission and control signal integrity. This category encompasses a wide range of passive devices such as Ethernet switches, industrial routers, wireless access points, antennas, cables, connectors, patch pan...
In the industrial automation landscape, Networks and Wireless Passive components form the invisible backbone that ensures reliable data transmission and control signal integrity. This category encompasses a wide range of passive devices such as Ethernet switches, industrial routers, wireless access points, antennas, cables, connectors, patch panels, and signal repeaters. These components operate without active amplification, relying on physical layer characteristics like impedance matching (e.g., 50 or 75 ohms), frequency bands (e.g., 2.4 GHz, 5 GHz, or sub-GHz for IoT), and shielding types (e.g., SFTP, STP, UTP) to maintain signal quality in harsh industrial environments. Key technical parameters include data rates (e.g., 10/100/1000 Mbps), PoE (Power over Ethernet) capabilities, IP ratings (e.g., IP67 for outdoor or washdown areas), and connector types (e.g., RJ45, M12, N-type, SMA). These are not active network devices but the passive infrastructure that supports robust communication in factory floors, substations, and remote monitoring sites.
Networks and Wireless Passive components are deployed across diverse industrial sectors, including manufacturing plants, oil and gas facilities, water treatment plants, logistics warehouses, and building management systems. In factory automation, they enable real-time communication between PLCs, HMIs, and sensors via industrial Ethernet protocols like PROFINET, EtherNet/IP, or Modbus TCP. In wireless applications, passive antennas and cables extend coverage for remote I/O, mobile robots, and condition monitoring systems. These components are also critical in power distribution substations for SCADA communications, where electromagnetic interference (EMI) resistance is paramount. Environmental considerations include temperature ranges from -40°C to +85°C, vibration resistance, and ingress protection against dust and moisture.
Key subcategories within this category include Industrial Ethernet Switches (e.g., unmanaged and managed types with port counts from 5 to 24), Wireless Access Points (e.g., dual-band or tri-band models), Antennas (e.g., omnidirectional, directional, and panel antennas with gain ratings from 2 dBi to 15 dBi), and Cables and Connectors (e.g., Cat5e, Cat6, Cat6a, and fiber optic cables with LC, SC, or ST connectors). Specific article codes often follow patterns like "SW-UNM-5P" for a 5-port unmanaged switch or "ANT-OMNI-5DBI" for a 5 dBi omnidirectional antenna. Other relevant items include patch panels (e.g., 24-port or 48-port), signal repeaters, and surge protectors for network lines. These codes typically include identifiers for type, port count, frequency, or gain.
Partnering with Electric Automation Network ensures access to genuine, certified Networks and Wireless Passive components with real-time pricing and global express shipping. Our team of specialized engineers provides tailored technical support, including selection assistance for impedance, frequency, and environmental requirements. We offer detailed documentation per article, including datasheets and installation guides, to streamline your project planning. Whether you need a single antenna for a remote sensor network or a full suite of switches and cables for a new production line, we deliver with speed and precision.
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.