The wall mounted range of mild steel IP 66 enclosures has been designed with the user in mind. Practical, efficient and with a wide range of standard sizes and accessories available from stock, the wall mounted range offers a solution to virtually every application, or can be easily customised to suit specific requirements.
With mounting plate
Mounting Plate Height
Mounting Plate Width
Max. enclosure useful depth
Gland Plate Opening Size
No. of Gland Plate Openings
Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater.
Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.
Surface mounted with 130º opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. There are studs to mount door profiles MMDP included as standard. Sealing is ensured by an injected one piece polyurethane gasket.
Customized lock with double grip for easy opening of the door. Double-bit 3 mm insert and 90º movement. 1000 mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory.
The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.
Gland Plate Opening:
Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
Complies with IP 66 | TYPE 4, 12, 13 | IK 10. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.
RAL 7035 structured powder coating.
Enclosure with door, and two door mounting profiles. Plastic double-bit 3 mm key, and mounting accessories. Earthing facilities.