Available Ship on today
Wall mounted, 1400x1000x300
Control Cabinets Switch Boxes Distribution Enclosures
Wall Mounting Enclosures - ELDON
Mild steel, double door. MAD - ELDON
* Brand new product in its original packaging covered by the warranties and certifications provided by ELDON
The wall mounted range of mild steel enclosures is also available in double door versions and complies with IP 55. There are 5 sizes available and a range of accessories. The standard finish is RAL 7035, although other colours and sizes are available on request.
|Note||With mounting plate|
|Mounting Plate |
|Mounting Plate |
|Max. enclosure |
|Gland Plate |
|No. of Gland Plate |
Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.
Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.
Surface mounted with 130° opening. Concealed removable hinges with captive pin. Two removable mounting profiles in the right hand door. Sealing is ensured by an extruded one piece polyurethane gasket.
Customised lock with double grip for easy opening of the door, double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.
The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.
Gland Plate Opening:
Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
IP 55 | TYPE 12, 13 | IK 10. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.
RAL 7035 structured powder coating.
Enclosure with doors, and two door mounting profiles on the right door. Gland plate(s) with gasket(s), metallic DIN 3 mm key, and mounting accessories. Earthing facilities.
No customer reviews for the moment.
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.