EGS device systems - OBO BETTERMANN

Multimedia support, HDMI socket with screw connection, 45x45mm, Pure white, 9010, Polycarbonate, PC

HDMI connection, 1 module, straight outlet, as screw connection. Multimedia support with one HDMI connection socket, straight cable outlet, with labelling panel, HDMI socket with screw connection. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.Note: Due to the device dimensions, device installation in Rapid 45 device installation trunking and ISSR..45 / ISSD..45 service poles is not possible.

Multimedia support, HDMI with cable, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

HDMI connection, 1 module, slanting outlet, with connection cable. Multimedia support with one HDMI connection socket, slanting cable outlet, with labelling panel, short HDMI connection cable, socket-socket version. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Power supply unit IP20, with grip, equipped, 140x140x252, Graphite black, 9011, Polyamide, PA

VH-4 4SD hanging turret, IP20, with handle, equipped 140x140x252 Polyamide, PA,

HoverCube VH-4, 4x protective contact socket. Housing equipped and prewired with suspension lug, grip hook and four cover plates.Equipped as follows: 4x single protective contact sockets 16 A/250 V with increased touch protection, prewired for two AC currents, connection via 2x 3-pin terminals, 1x CEE socket 16 A/415 V, with partition for circuit separation.- Housing in graphite black, RAL 9011- Cover plates in rape yellow, RAL 1021.

Modalnet, module with cover plate, 60x130x64, Pure white, 9010, Polycarbonate, PC

Surface-mounted housing, expansion module, double. Extension module consisting of housing base and cover frame to accept Modul 45 accessories of 2x module width = 90 mm.

Surface cover frame, double, Pure white, 9010, Polycarbonate, PC

WG-UBR2 RW recessed frame, double Polycarbonate, PC,

Decorative frame for hollow wall installation, 3 x double. Blind frame for hollow wall beam mounting.

UP support double, Strip-galvanised, DIN EN 10147, Steel, St

Support for cavity wall installation 2x double. Metal cavity wall support to accept the double Modal net housing.Installation dimensions: L 127 x W 137 x H 44.5 mm

Connection module Cat. 6 shielded,

RJ45 data connection module, Cat. 6, shielded. Connection module Cat. 6 shielded, with an RJ 45 slot. Includes an EMC screen hood, a dust cover, a cable tie and mounting instructions. Suitable for installation in data technology supports of type DTG-2RM and DTS-2RM.

Connection module CAT 6A unscreened, Grey,

Connection module Cat. 6A, unshielded, Keystone. Connection module Cat. 6A (ISO) unshielded, with an RJ45 slot. Including a dust cover, a cable tie, a Keystone fastening frame and mounting instructions. Suitable for installation in the data technology supports of type DTG-2C and DTS-2C, support plate of type MTM 2C and MTM 3C, mounting plate of type MPR2 2C, mounting supports of type MTGE2 2C, MTGE2 15 2C and MTGE2 F 2C.

Blind lid 1/1 module , 45x45mm, Pure white, 9010,

Blanking cover, 1 module, pure white. Blanking cover for closing off empty spaces for a device (one module).For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Data technology support f. 2 connection modules type C, 45x45mm, Pure white, 9010, Polycarbonate, PC

Data technology support, 1 module, straight outlet, type C. Data technology support with straight outlet and locking slider to accept two data technology connection modules with RJ45 socket. The locking fastening is suitable for horizontal and vertical installation in the system environment. Type C has a mounting opening of 19.30 x 14.80 mm and is designed for direct fastening of the data connection modules in the mounting opening.The type C data technology support is suitable for accepting the following data connection modules: BTR (Keystone design): Cat. 6A module and UAE module; Corning: modules with Keystone seat; CobiNet: CobiDat KS module; Dätwyler: KS-T, KS-TS, MS-K and KU-T; EKU: E-Stone; Harting: Prelink Keystone Cat. 6A; Fixlink Keystone Cat. 6A; Komos: KDM 500 module; Leoni Ke

Data technology support f. 2 connection modules type C, 45x45mm, Aluminium painted, Polycarbonate, PC

Data technology support, 1 module, straight outlet, type C. Data technology support with straight outlet and locking slider to accept two data technology connection modules with RJ45 socket. The locking fastening is suitable for horizontal and vertical installation in the system environment. Type C has a mounting opening of 19.30 x 14.80 mm and is designed for direct fastening of the data connection modules in the mounting opening.The type C data technology support is suitable for accepting the following data connection modules: BTR (Keystone design): Cat. 6A module and UAE module; Corning: modules with Keystone seat; CobiNet: CobiDat KS module; Dätwyler: KS-T, KS-TS, MS-K and KU-T; EKU: E-Stone; Harting: Prelink Keystone Cat. 6A; Fixlink Keystone Cat. 6A; Komos: KDM 500 module; Leoni Ke

Data technology support f.2 connection modules type RM, 45x45mm, Pure white, 9010, Polycarbonate, PC

Data technology support, 1 module, straight outlet, type RM. Data technology support with straight outlet and locking slider to accept two data technology connection modules with RJ45 socket. The locking fastening is suitable for horizontal and vertical installation in the system environment. Type RM has a special module seat and is designed for indirect fastening of the data connection modules in the mounting opening.The type RM data technology support is suitable for accepting the following data connection modules: Types ASM-C5, ASM-C5 G, ASM-C6 and ASM-C6 G; R&M: Cat. 5 and Cat. 6 modules without support plate.For installation in Rapid 45 and Rapid 80 device installation trunking, ISS service poles and underfloor systems.

Cover frame for single Modul 45, 84x84mm, Pure white, 9010, Polycarbonate, PC

Cover frame AR45-F1, for accessory mounting box 71GD8-2, single. Front locking cover frame for Modul 45 devices, single, without labelling panel for horizontal and vertical device installation, for locking in accessory mounting box 71GD8-2.For installation in Rapid 80 device installation trunking and ISS service poles.

Cover frame for triple Modul 45, 84x185mm, Pure white, 9010, Polycarbonate, PC

AR45-F3 RW Frame, Modul 45, triple 84x185mm Polycarbonate, PC,

Cover frame AR45-F3, for accessory mounting box 71GD9-2, triple. Front locking cover frame for Modul 45 devices, triple, without labelling panel for horizontal and vertical device installation, for locking in accessory mounting box 71GD9-2 or in mounting support 71MT3 45-2.For installation in Rapid 80 device installation trunking and ISS service poles.

POWER OUTLET STD-D0 ROJO2

0° socket, protective contact, double. Power socket, double 0°, with increased touch protection with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 trunking, device installation trunking, service poles, underfloor systems and desk boxes.

TAKE EXIT CABLE KAL-K11 RW1

KAL-K11 RW1 cable outlet, with 45x45mm Polycarbonate strain relief, PC,

Cable outlet for 3-11 mm section, pure white. 2-piece cable outlet with identification field, consisting of a support with strain relief and cover. The strain relief is designed for cable diameter of 3 - 11 mm. It can be installed both vertically and horizontally. For installation in Rapid 45 and Rapid 80 racetracks, distribution columns and underfloor systems.

POWER OUTLET STD-D0 NGGR2

0° socket, protective contact, double. Power socket, double 0°, with increased touch protection with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 trunking, device installation trunking, service poles, underfloor systems and desk boxes.

TURRET PENDANT VH-4 LG

HoverCube VH-4, empty housing. Empty housing with suspension lug and grip hook, for the installation of four electrical resources, with included partition. Without cover plates.- Housing in graphite black, RAL 9011- Cover plates in rape yellow, RAL 1021.

ANTENNA JACK ANT-3SD SWGR1

Simple antenna socket, Radio - TV- SAT 45x45mm greyish black 7021 Polycarbonate, PC

Antenna connection, 1 module, TV / radio / SAT, antenna socket, black-grey. Socket for antenna, BK and satellite reception systems with connection for TV and radio.Frequency: 5–2150 MHz Heat attenuation: 5-862 MHz - 1dB 950-2150 MHz - 2 dB Return channel attenuation: 14 dB EMC protection class AFor installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Electrical socket 33°, simple STD-D3S RW1, ground connection 250V, 10/16A Polycarbonate, PC

33° electrical outlet, simple grounding STD-D3S RW1

33° socket, protective contact, single. Protective contact socket, Single 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

33° electrical socket, double STD-D3S RW2, ground connection 250V, 10/16A Polycarbonate, PC

33° electrical outlet, double grounding STD-D3S RW2

33° socket, protective contact, double. Protective contact socket, double 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

33° electrical socket, triple STD-D3S SRO3, ground connection 250V, 10/16A Polycarbonate, PC

33° electrical outlet, triple grounding STD-D3S SRO3

33° socket, protective contact, triple. Protective contact socket triple 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

33° electrical socket, double STD-D3SC SRO2, grounding, Connect 45 250V, 10/16A Polycarbonate, PC

33° electrical outlet, double grounding, Connect 45 STD-D3SC SRO2

Socket 33°, Connect 45, protective contact, double. Protective contact socket double 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

Deskbox DBL-1B D4S 1C, with fixing claw 325x71x78 Aluminum, Alu anodized

DBL-1B D4S 1C Deskbox, with fixing claw 325x71x78 Aluminum, Alu, anodized

Deskbox with fastening clamp, 4 protective contact sockets, USB Charger. Ready-for-connection Deskbox DBL for the direct supply of workstations with power. With a Wieland GST18® connector and cable outlet at the left side of the profile. Toolless mounting with 2 fastening clamps for tabletop thicknesses of 8 to 40 mm and 40 to 70 mm. The Deskbox is equipped with 4 black protective contact sockets in 33° connection direction and a 18W USB A+C Charger.

33° electrical socket, triple STD-D3S RW3, ground connection 250V, 10/16A Polycarbonate, PC

33° electrical outlet, triple grounding STD-D3S RW3

33° socket, protective contact, triple. Protective contact socket triple 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

DBL-1B D2S 1C Deskbox, with fixing claw 325x71x78 Aluminum, Alu anodized

DBL-1B D2S 1C Deskbox, with fixing claw 325x71x78 Aluminum, Alu, anodized

Deskbox with fastening clamp, 2 protective contact sockets, USB Charger. Ready-for-connection Deskbox DBL for the direct supply of workstations with power, communications and data technology connections. With a Wieland GST18® connector and cable outlet at the left side of the profile. Toolless mounting with 2 fastening clamps for tabletop thicknesses of 8 to 40 mm and 40 to 70 mm. The Deskbox is equipped with 2 black protective contact sockets in 33° connection direction and a 18W USB A+C Charger. In addition, the Deskbox has space for retroinstallation of 4 communications and data technology Keystone modules (type Modul 45®).

33° electrical socket, triple STD-D3S SWGR3, ground connection 250V, 10/16A Polycarbonate, PC

33° electrical socket, triple STD-D3S SWGR3, 250V grounding, 10/16A Polycarbonate, PC,

33° socket, protective contact, triple. Protective contact socket triple 33°, with increased touch protection, with screwless terminals, 2-pin, 16 A, 250 V~, with connection terminals to IEC 60884-1.For installation in Rapid 45 ducts, device installation ducts, installation columns, underfloor systems and Deskboxes.

Multimedia support, VGA with cable, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

Multimedia socket, VGA MTG-VGA F RW1, with connection cable 45x45mm Polycarbonate, PC,

VGA socket, module 1, straight outlet, with connection cable. Multimedia support with a VGA connector, straight cable output, with identification field, short VGA connection cable (HD15) in socket-socket version. Bracket with hook, suitable for vertical and horizontal mounting in the system environment. For installation in Rapid 45 and Rapid 80 racetracks, distribution columns and underfloor systems.

Multimedia support, DVI with cable, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

DVI-I connection, 1 module, slanting outlet, with connection cable. Multimedia support with one DVI-I connection socket, slanting cable outlet, with labelling panel, short DVI-I connection cable, socket-socket version. Support with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, HDMI socket with screw connection, 45x45mm, Pure white, 9010, Polycarbonate, PC

Multimedia socket, HDMI MTS-HD S RW1, with connection screw 45x45mm Polycarbonate, PC,

HDMI jack, module 1, cross output, screw connection. Multimedia support with an HDMI connector, cable cross-section, with identification field, HDMI connector with screw connection. Support plate with hook, suitable for vertical and horizontal mounting in the system environment. For installation in Rapid 45 and Rapid 80 racetracks, distribution columns and underfloor systems.

Multimedia support, HDMI with cable, socket-socket, 45x45mm, Aluminium painted, Polycarbonate, PC

Multimedia socket, HDMI MTG-HD F AL1, with connection cable 45x45mm Polycarbonate, PC,

HDMI connection, 1 module, straight outlet, with connection cable. Multimedia support with one HDMI connection socket, straight cable outlet, with labelling panel, short HDMI connection cable, socket-socket version. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, USB 3.0 A socket with screw connection, 45x45mm, Pure white, 9010, Polycarbonate, PC

Multimedia socket, USB 3.0 A MTG-U3A S RW1, with connection screw 45x45mm Polycarbonate, PC,

USB 2.0/3.0 connection, 1 module, straight outlet, as screw connection. Multimedia support with one USB 3.0 connection socket, straight cable outlet, with labelling panel, USB 3.0 type A socket with screw connection. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, USB 3.0 A socket with screw connection, 45x45mm, Pure white, 9010, Polycarbonate, PC

USB 2.0/3.0 connection, 1 module, slanting outlet, as screw connection. Multimedia support with one USB 3.0 connection socket, slanting cable outlet, with labelling panel, USB 3.0 type A socket with screw connection. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support,USB 3.0 A-A with cable, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

USB 2.0/3.0 connection, 1 module, straight outlet, with connection cable. Multimedia support with one USB 3.0 connection socket, straight cable outlet, with labelling panel, short USB 3.0 type A connection cable, socket-socket version. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support,USB 3.0 A-A with cable, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

USB 2.0/3.0 connection, 1 module, slanting outlet, with connection cable. Multimedia support with one USB 3.0 connection socket, slanting cable outlet, with labelling panel, short USB 3.0 type A connection cable, socket-socket version. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, audio jack 1xsocket with sold. connection, 45x45mm, Pure white, 9010, Polycarbonate, PC

Mini jack connection, 1 module, slanting outlet, as soldered connection. Multimedia support with one mini jack connection socket, slanting cable outlet, with labelling panel, mini cinch socket (TRS 3.5 mm) with soldered connection. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, video BNC 1x coupling, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

Multimedia socket, video BNC MTS-BC F RW1,1x hitch, socket-socket 45x45mm Polycarbonate, PC,

BNC connection, 1 module, outlet slanted, as a 1:1 coupling, pure white

Multimedia support audio cinch 2x coupling, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

Audio cinch connection, 1 module, slanting outlet, as 1:1 coupling, pure white. Multimedia support with two cinch connection sockets for audio R/L, slanting cable outlet, with labelling panel, two cinch couplings (RCA), socket-socket version, colour coding red/white. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support audio/video 3x coupling, socket-socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

Audio/video cinch connection, 1 module, slanting outlet, as 1:1 coupling, pure white. Multimedia support with three cinch connection sockets for audio/video, slanting cable outlet, with labelling panel, three cinch couplings (RCA), socket-socket version, colour coding yellow/red/white. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, XLR, 3-pin socket w. soldered connection, 45x45mm, Aluminium painted, Polycarbonate, PC

Multimedia socket, XLR, 3-pin MTG-X3F L AL1, Socket with welded connection 45x45mm Polycarbonate, PC,

XLR connection, 1 module, straight outlet, 3-pin socket, as soldered connection, aluminium-painted. Multimedia support with one XLR connection socket, straight cable outlet, without labelling panel, 3-pin XLR socket with soldered connection. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Multimedia support, XLR without connection socket, 45x45mm, Pure white, 9010, Polycarbonate, PC

Multimedia support for XLR plug connector, 1 module, straight outlet, pure white. Multimedia support for a XLR plug connector, straight cable outlet, without labelling panel, without plug connector. Support plate with locking fastening, suitable for horizontal and vertical installation in the system environment.For installation in Rapid 45 device installation ducts, Rapid 80 device installation ducts, service poles and underfloor systems.

Underfloor distributor , Steel, St

UVS energy distributor with fixed connection, special circuit. Energy distributor for heavy current technology with fixed connection, equipped and prewired.Input: one rotary current circuit via a screwless terminal block, 5-pin, for cable cross-sections of 0.5–4 mm². Output: six self-locking connectors, 3-pin, in white, 16 A, type GST18i (socket: 2 x L1, 2 x L2, 2 x L3). Internal wiring: PVC non-sheathed cable H07V-U2.5.

Underfloor distributor with plug connection, 160x150x48, Steel, St

UVS energy distributor with plug connection, normal circuit. Energy distributor for heavy current technology with plug connection, equipped and pre-wired.Input: One 3-phase circuit using a self-locking connector, 5-pin, type GST18i (connector part).Output: Six self-locking connectors, 3-pin, in black, 16 A, type GST18i (socket part: 2 x L1, 2 x L2, 2 x L3).Internal wiring: PVC non-sheathed cable H07V-U2.5.

Underfloor distributor with plug connection, 160x300x48mm, Steel, St

UVS energy distributor with plug connection, normal and special circuit. Energy distributor for heavy current technology with plug connection, equipped and pre-wired.Input: Two 3-phase circuits using self-locking connectors, 5-pin, type GST18i (connector part).Output: Twelve self-locking connectors, 3-pin, in white (6x) and black (6x), 16 A, type GST18i (socket part: 2 x L1, 2 x L2, 2 x L3 for each rotary current circuit).Internal wiring: PVC non-sheathed cable H07V-U2.5.

Plug 3-pole, screwless connection, White,

Connector part 3-pin, spring power connection, white. Connector part, 3-pin, type GST18i with spring power connection for rigid cables of 1.5–2.5 mm², single-wire and ultrasonically welded, fine wire cables 1.5 mm² with end sleeves, unmounted with strain relief, can be terminated in situ, 250 V, 16 A.Two connections per pole, for cables H05VV, NYM (Ø 7.8–10.33 mm), lockable, a lock should be provided for strain relief according to VDE 0628.Stripping length: 45 mmStripped length: 9 mm

Plug 3-pole, screw connection, Black,

Connector part, 3-pin, screw connection, black. Connector part, 3-pin, type GST18i with screw connection, low height (no slot loss in combination with distributor blocks), for cross-sections of 0.75–2.5 mm², single- and fine-wire cables connectable without end sleeve, for cable diameters between 6.5–10.5 mm (H05VV, NYM), unmounted with strain relief, terminable in situ, 250 V, 16 A. Stripping length: 31 mm Insulation removal length: 7 mm

Distribution block, 3-pole, 1 input / 3 outputs 3-pole, Black,

3-pole VB-3 GST18i3p distributor block, 1 input / 3 outputs 3 poles,

T-shaped distribution block, 1 input / 2 outputs 3-pole, Black,

Distributor block, 3-pin, T-shaped. T distributor with lock, type GST18i, one input with 3-pin connector part and two outputs with 3-pin socket part.

Extension cable cross section 3x2.5 mm², L3000mm, Black,

3-wire connection cable, PVC, cross-section 2.5 mm², Cable length 3 m, black. Connection cable 3 x 2.5 mm² in the version socket – connector with GST18i connection system.

Extension cable cross section 3x2.5 mm², L8000mm, Black,

3-wire connection cable, PVC, cross-section 2.5 mm², Cable length 8 m, black. Connection cable 3 x 2.5 mm² in the version socket – connector with GST18i connection system.