Temperature transformer

2902049

MINI MCR-2-RTD-UI

-

Resistance thermometer measuring transducer

Configurable temperature converter with plug-in connection technology for the connection of 2, 3, 4 conductor resistance heaters and transmitters. Configurable via DIP switch or software. Screw connection technology, standard configuration

2902052

MINI MCR-2-RTD-UI-PT

-

Resistance thermometer measuring transducer

Configurable temperature converter with plug-in connection technology for the connection of 2, 3, 4 conductor resistance heaters and transmitters. Configurable via DIP switch or software. Push-in connection technology, standard configuration

2902055

MINI MCR-2-TC-UI

-

Thermocouple measuring transducer

Configurable temperature converter with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, standard configuration

2902849

MINI MCR-RTD-UI-NC

-

Resistance thermometer measuring transducer

Configurable temperature converter for the connection of 2, 3, 4 conductor resistance heaters and transmitters. Configurable via DIP switches or with the extended functionality by software. Screw connection, standard configuration.

Configurable temperature converter for the connection of 2, 3, 4 conductor resistance heaters and transmitters. Configurable via DIP switches or with the extended functionality by software. Screw connection, standard configuration.

2902851

MINI MCR-TC-UI-NC

-

Thermocouple measuring transducer

Configurable temperature converter for thermocouple connection. Configurable via DIP switches or with the extended functionality by software. Screw connection, standard configuration.

2905249

MINI MCR-2-TC-UI-PT

-

Thermocouple measuring transducer

Configurable temperature converter with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, standard configuration

1050201

PEN4K6H116ST

-

Industrial Automation Bussines and Industrial Control Devices Switching Devices

1050252

4K10H400COK3

Y8-1050252

Drive shaft, L=400mm, for DMV 250/400

4K10H400COK3

Eaton 4K Drive shaft, In combination with change-over mechanism, Shaft diameter: 10 x 10 mm, Shaft length: 400 mm (from bottom of switch to top of shaft), For use with: K3 Rotary handles

2908662

MACX MCR-TS-I-OLP

-

Temperature measuring transducer

Output loop-fed temperature converter to transmit up to 2 sensor signals from RTD and CT sensors, as well as resistance and voltage transmitters via 4 mA... 20 mA. HART, Standard Configuration, Safety Integrity Level (SIL, IEC61508): 2, Systematic Capability: 3, Screw Connection

2864273

MINI MCR-SL-PT100-UI-NC

-

Resistance thermometer measuring transducer

MCR temperature converter for Pt 100 temperature sensors, configurable via DIP switch, with screw connection, without presetting

2864370

MINI MCR-SL-PT100-UI-200-NC

-

Temperature measuring transducer

MCR temperature converter, configurable, for Pt 100 temperature sensors, screw connection, not configured

MCR temperature transducer, configurable, for Pt 100 temperature sensors, with screw-connection, not configured

2865654

MACX MCR-EX-T-UI-UP

-

Temperature measuring transducer

Freely programmable intrinsically safe temperature converter with analog output and 1 limit value relay, standard configuration, resistance thermoresistors in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, screw connection, SIL, PL.

2865751

MACX MCR-EX-T-UIREL-UP

-

Temperature measuring transducer

Programmable temperature converter with analog output and 3 limit value relays, intrinsically safe signal outputs, heat resistance in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, screw connection, SIL, PL.

2924689

MACX MCR-EX-T-UI-UP-SP

-

Temperature measuring transducer

Programmable intrinsically safe temperature converter with analog output and 1 limit value relay, standard configuration, heat resistance in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, push-in connection, SIL, PL.

2924799

MACX MCR-EX-T-UIREL-UP-SP

-

Temperature measuring transducer

Programmable temperature converter with analogue output and 3 limit value relays, intrinsically safe signal outputs, heat resistance in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, push-in connection, SIL, PL.

2810308

MINI MCR-SL-PT100-LP-NC

-

Temperature measuring transducer

Configurable Loop-powered temperature converter for Pt 100 temperature sensors, configurable via DIP switch, with screw connection, without presetting

Configurable Loop Powered Converter for Pt 100 Temperature Sensors, DIP Switch Configurable, with Screw Connection, Not Preconfigured

2811378

MACX MCR-T-UIREL-UP

-

Temperature measuring transducer

Freely programmable temperature converter with analog output and 3 limit value relays, standard configuration, resistance thermoresistors in 2, 3, or 4 conductor technology, thermocouples, galvanic separation, wide power range, screw connection, SIL, PL.

2811394

MACX MCR-T-UI-UP

-

Freely programmable temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, galvanic isolation, wide-range power supply, screw connection, SIL

Freely programmable temperature converter with analog output and 1 limit value relay, standard configuration, heat resistances in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, screw connection, SIL, PL.

2811828

MACX MCR-T-UIREL-UP-SP

-

Temperature measuring transducer

Freely programmable temperature converter with analogue output and 3 limit value relays, standard configuration, heat resistance in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, push-in connection, SIL, PL.

2811860

MACX MCR-T-UI-UP-SP

-

Temperature measuring transducer

Freely programmable temperature converter with analog output and 1 limit value relay, standard configuration, thermoresistors in 2, 3 or 4 conductor technology, thermocouples, galvanic separation, wide power range, push-in connection, SIL, PL.

1291894

MACX MCR-EX-AP-RTD-RTD

-

Ex i-resistance insulator transformer is used for intrinsically safe service of Pt 100 heat resistors in the technology of 2, 3 or 4 conductors and resistance transmitters. The measured values at the Ex i input are transmitted 1:1 to the non-Ex i output. Standard configuration, 3-way separation, Screw connection

Ex i, Resistance Isolating Transformer is used for the intrinsically safe service of Pt 100 resistance thermometers in the technology of 2, 3 or 4 resistance conductors and transmitters. The measured values at the input Ex i are transmitted 1:1 to the output at non-Ex i. 3-Way Separation, Screw Connection

Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. Standard configuration, 3-way isolation, Screw connection

1291955

MACX MCR-EX-AP-RTD-RTD-SP

-

Ex i-resistance insulator transformer is used for intrinsically safe service of Pt 100 heat resistors in the technology of 2, 3 or 4 conductors and resistance transmitters. The measured values at the Ex i input are transmitted 1:1 to the non-Ex i output. Standard configuration, 3-way separation, Push-in connection

Ex i, Resistance Isolating Transformer is used for the intrinsically safe service of Pt 100 resistance thermometers in the technology of 2, 3 or 4 resistance conductors and transmitters. The measured values at the input Ex i are transmitted 1:1 to the output at non-Ex i. 3-Way Separation, Push-in Connection

Ex i-Resistance isolator for intrinsically safe operation of Pt 100 resistance thermometers in 2, 3, or 4-conductor technology and resistance-type sensors. The values measured at the Ex i input are transmitted 1:1 to the non Ex i output. Standard configuration, 3-way isolation, Push-in connection

2908660

MACX MCR-EX-TS-I-OLP

-

The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage encoders via the HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety, screw connection.

Ex i, Output Loop-Fed Temperature Converter to transmit up to 2 sensor signals from RTD and CT sensors, as well as resistance and voltage transmitters using 4 mA... 20 mA. HART, Standard Configuration, Safety Integrity Level (SIL, IEC61508): 2, Systematic Capability: 3, Screw Connection

The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage encoders via the HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety, screw connection.

2908661

MACX MCR-EX-TS-I-OLP-SP

-

The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors via HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety, Push-in connection.

Ex i, Output Loop-Fed Temperature Converter to transmit up to 2 sensor signals from RTD and CT sensors, as well as resistance and voltage transmitters using 4 mA... 20 mA. HART, Standard Configuration, Safety Integrity Level (SIL, IEC61508): 2, Systematic Capability: 3, Push-in Connection

The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage sensors via HART communication or 4 ... 20 mA, configurable. SIL 2/3, intrinsic safety, Push-in connection.

1050192

MACX MCR-RTD-I

-

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, screw connection, SIL, 3-way electrical isolation, standard configuration.

Temperature converter, transforms signals from heat resistors and resistors into analog signals of 0/4-20 mA. Free programmable, screw connection, safety integrity level, 3-way galvanic separation, standard configuration.

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, screw connection, SIL, 3-way electrical isolation, standard configuration.

1050201

MACX MCR-RTD-I-SP

-

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way electrical isolation, standard configuration.

Temperature converter, transforms signals from heat resistors and resistors into analog signals of 0/4-20 mA. Free programmable, push-in connection, safety integrity level, 3-way galvanic separation, standard configuration.

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way electrical isolation, standard configuration.

1050222

MACX MCR-EX-RTD-I

-

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, SIL, screw connection, standard configuration.

Intrinsically Safe Temperature Converter: Converts the signals from the thermoresistors installed in the Ex zone and transmits a 0/4-20 mA signal to a load in the safe area. Free programming. 3-way spacing, safety integrity level, screw connection, standard configuration.

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, SIL, screw connection, standard configuration.

1050228

MACX MCR-TC-I

-

Temperature transducer: converts signals from thermocouples and mV sources into 0/4…20 mA signals. Freely programmable, 3-way electrical isolation, screw connection, SIL.

Temperature converter: transforms signals from thermocouples and mV sources into 0/4-20 mA signals. Free programming, 3-way galvanic separation, screw connection, SIL.

Temperature transducer: converts signals from thermocouples and mV sources into 0/4…20 mA signals. Freely programmable, 3-way electrical isolation, screw connection, SIL.

1050233

MACX MCR-EX-TC-I

-

Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL.

Intrinsically Safe Temperature Converter: Transforms signals from thermocouples and mV sources installed in the Ex zone and transmits a 0/4-20 mA signal to a load in the safe zone. Free programming. 3-way separation, screw connection, SIL.

Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL.

1050252

MACX MCR-EX-RTD-I-SP

-

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, SIL, Push-in connection, standard configuration.

Intrinsically Safe Temperature Converter: Converts the signals from the thermoresistors installed in the Ex zone and transmits a 0/4-20 mA signal to a load in the safe area. Free programmable, 3-way separation, safety integrity level, push-in connection, standard configuration.

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, SIL, Push-in connection, standard configuration.