Conductor holder for lightning protection

SUPPORT FOR DRIVER 113 Z-K 8-10

Driver support 113 Z-K 8-10, 8-10mm Zinc die-casting, Zn, electro-galvanized, EN ISO 19598 / EN ISO 4042

Cable bracket with hinged crossbar Rd 8−10 mm. • With female thread M8 or through hole Ø 7 mm• Hinge crossbar for quick swivel mounting• Crossbar mounted with 2 hexagonal bolts

Cable fixing device for round cable, 8mm, Stainless steel, grade 304, VA, 1.4301

Support for 177 20 VA M8 driver, for round conductor 8mm Stainless steel 1.4301, A2, 1.4301,

Cable bracket for Rd 8 mm, through-way Ø 7 mm. • With female thread M8 or through hole Ø 7 mm• From stainless steel (V2A)

Cable fixing device for round cable, 8-10mm, Electrogalvanised, DIN 50961, Die-cast zinc, Zn

Cable bracket Rd 8–10 mm, 30 mm mounting height. • With female thread (G)• With over-piece and 2 hexagonal bolts• Installed height 30 mm

Cable fixing device for round cable, 8-10mm, Electrogalvanised, DIN 50961, Die-cast zinc, Zn

Cable bracket Rd 8–10 mm, 30 mm mounting height. • With female thread (G)• With over-piece and 2 hexagonal bolts• Installed height 30 mm

Cable fixing device with wood screw, 8-10mm, Galvanised, Die-cast zinc, Zn

Cable bracket Rd 8–10 mm with wood screw, plastic anchor. • With female thread M8 or through hole Ø 7 mm• Over-piece installed with 2 hexagonal bolts• Version HD with wood screws (5 x 60) and plastic dowels (8 x 40)

Cable fixing device , 20mm, Grey, Polyamide, PA

Cable bracket Rd 8–10 mm. • With female thread M8 or through hole Ø 7 mm• Weather and temperature-resistant from -35 °C to +90 °C

Cable fixing device , 8mm, Copper-plated, Stainless steel, grade 304, VA, 1.4301

Cable bracket for Rd 8 mm, through-way Ø 5 mm, copper-plated. • With female thread M6 or through hole Ø 5 mm• From stainless steel (V2A)• VA-VK: copper-plated

Cable fixing device complete for round cable, Stainless steel, grade 304, VA, 1.4301

Cable bracket for Rd 8 mm, fastening with screw and anchor. • With female thread M8 or through hole Ø 5 mm• From stainless steel (V2A)• With pre-mounted wood screws (5 x 60) and plastic dowels (8 x 40)

Cable fixing device , 8-10mm, Copper-plated, Die-cast zinc, Zn

Driver support 113 8-10, 8-10mm Die-cast with zinc, Zn, copper-plated

Cable holder Rd 8-10 mm

Cable fixing device for flat conductors, 30mm, Electrogalvanised, DIN 50961, Die-cast zinc, Zn

Cable bracket for flat conductor. • With female thread M8 or through hole for wood screws• For flat conductor FL 30• Sliding over-piece for quick installation

Cable bracket with tight.strap for isCon cable, ø 23mm, Black, Stainless steel, grade 304, VA, 1.4301

Support for isCon HS VA driver, for isCon line Ø23mm Stainless steel 1.4301, A2, 1.4301,

VA cable bracket with tightening strap. Cable bracket with tightening strap for isCon® conductor, for mounting on pipes with Ø ≤ 600 mm. Including sprung discs to protect the screws against loosening.

Cable fixing device for isCon cable, grey, ø 26mm, Stainless steel, grade 304, VA, 1.4301

VA cable bracket for isCon® conductor for mounting on roof/wall structures. • For isCon® conductor for mounting on roof/wall structures • With sprung discs to protect the screws against loosening

Underlay for cable holder 177/VA, Light grey, 7035, Polypropylene, PP

Washer for cable bracket, type 177. • For simple wall installation• UV-resistant

Cable fixing device with bonding base and thread, M8, Polyamide, PA

Cable bracket, Rd 8−10 mm with bonding base. • For bonding to concrete, steel or smooth substrates• Not suitable for rough surfaces such as plaster, wood, bitumen strips• Processing at > +15 °C and on cleaned substrate• When installing flat conductors and round conductors, expansion elements are to be used for thermal compensation• Use on film roofs after consultation with the responsible roof construction company

Cable fixing device , 30mm, Copper, Polyamide, PA

Cable bracket Rd 8–10 mm, copper-plated. • With female thread M8 for screwing and through hole for wood screws• Colour: copper• Weather and temperature-resistant from -35 °C to +90 °C

Cable fixing device with wood screw, 30mm, Grey, Polyamide, PA

Cable bracket Rd 8−10 mm with pre-mounted wood screw. • With female thread M8 for screwing and through hole for wood screws• For round conductor Rd 8-10• Weather and temperature-resistant from -35 °C to +90 °C• With pre-mounted wood screws (5 x 60) and plastic dowels (8 x 40)

Cable fixing device , 100mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Cable fixing device , 200mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Cable fixing device with pin, 70mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Cable bracket for flat conductors, with round pin. • With crossbar and 2 hexagonal bolts (VA)• With loose round pin Ø 9 mm

Cable fixing device , 80mm, Hot-dip galvanised, DIN 267, Teil 10, Cast iron, TG

Cable fixing device , 150mm, Hot-dip galvanised, DIN 267, Teil 10, Cast iron, TG

Cable fixing device for round cable, 8-10mm, Copper-plated, Die-cast zinc, Zn