Air-termination equipment for lightning protection

5408976

101 3-ES-16

-

SET ISO-COMBI SET TRIANGUL

Insulated lightning protection set, 3-corner fastening. 3-corner fastening for an insulated air-termination unit at the separating distance s.• Mounting on walls and roof structures with two fastening plates • For maintenance of the separation distance to electrically conductive partsaccording to VDE 0185-305-3 (IEC 62305-3)• Acceptance of air-termination rods and round conductors with 8, 16 and 20 mm diameter• UV-resistant and weatherproof• Continuous temperature range -50 °C to +100°C• Material factor km = 0.7

5403333

F-Fix-132-300

-

TIP COLLECTOR F-FIX-132-300

Air-termination rod holder for ridge tiles. Rod holder for ridge tiles, for simple, quick and safe fastening of Ø 16 mm air-termination rods• System consisting of holder made of V2A stainless steel and aluminium air-termination rods• Quick and easy mounting thanks to pre-mounted air-termination rod• Air-termination rod length: 1,000 mm• Width adjustable between 180−260 mm• Spacing of the ridge holders: 110 mm (5403330)• Spacing of the ridge holders: 300 mm (5403333)Application: To protect roof structures such as photovoltaic and TV/SAT systems.

5408006

isCon Pro+ 75 SW

-

DERIVATION isCon 750 SW (250M)

isCon® conductor, Professional plus black. Please refer to the mounting instructions for information on routing the OBO isCon® conductor.• Highly voltage-resistant, insulated conductor• Floating discharge-free• Additional mechanical protection (black protective jacket)• For maintenance of the separation distance according to IEC 62305 (VDE 0185-305-3)• Tested according to IEC/EN 62561-1 (VDE 0185-561-1) with H1/150 kA• Equivalent separation distance se ≤ 0.75 m (air) and se ≤ 1.5 (solid material)• Tested according to IEC TS 62561-8 (VDE V 0185-561-8)• Halogen-free• Fire load 4.3 kWh/m• Can be used in potentially explosive areas Ex zone 1/2 and 21/22 when taking the current mounting instructions into account

5402878

101 3B-7500

-

TIP COLLECTOR 101/3B DIN-7500

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5402870

101 3B-5500

-

TIP COLLECTOR 101/3B DIN-5500

Pickup tip 101 3B-5500 for tripod 5500mm Aluminum, Alu

5402876

101 3B-7000

-

TIP COLLECTOR 101/3B DIN-7000

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5402874

101 3B-6500

-

TIP COLLECTOR 101/3B DIN-6500

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5408024

isCon IN connect

-

ELEMENT CONNECTION isCONIN

Connection element for installation in the insulated interception rod isFang IN. • Screw-on termination of the connection for the isCon® cable• Connection and installation of the cable in the insulated interception rod• Tested up to 150 kA (lightning protection Class II)

5403124

F-FIX-B10

-

BASE P/ FANGFIX F-FIX-B10

Base for FangFix system 10 kg. • Base with integrated anchor• Suitable for FangFix-10 system

5402868

101 3B-5000

-

TIP COLLECTOR 101/3B DIN-5000

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5402866

101 3B-4500

-

TIP COLLECTOR 101/3B DIN-4500

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5400155

101 A-1500

-

Interception/earth entry rods , 1500mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Air-termination/earth entry rod, rounded-off on both ends FT. • Full material Ø 16 mm• Both ends rounded

5400627

101 A-CU

-

Interception/earth entry rods , 1500mm, Copper, Cu

5401771

101 ALU-1000

-

Lightning rod with thread, 1000mm, Aluminium, Alu

Air-termination rod, one end rounded, M16 thread. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Ø 16 mm, aluminium• For stand system with M16 internal thread

5401801

101 ALU-1500

-

Lightning rod with thread, 1500mm, Aluminium, Alu

Air-termination rod, one end rounded, M16 thread. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Ø 16 mm, aluminium• For stand system with M16 internal thread

5401836

101 ALU-2000

-

Lightning rod with thread, 2000mm, Aluminium, Alu

Air-termination rod, one end rounded, M16 thread. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Ø 16 mm, aluminium• For stand system with M16 internal thread

5401852

101 ALU-2500

-

Lightning rod with thread, 2500mm, Aluminium, Alu

Air-termination rod, one end rounded, M16 thread. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Ø 16 mm, aluminium• For stand system with M16 internal thread

5401879

101 ALU-3000

-

Lightning rod with thread, 3000mm, Aluminium, Alu

5401980

101 VL1500

-

Lightning rod tapered, 1500mm, Aluminium, Alu

Tapered pipe air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Last metre is tapered from Ø 16 mm to Ø 10 mm, material: AlMgSi• Matches stand system FangFix

5401983

101 VL2000

-

Lightning rod tapered, 2000mm, Aluminium, Alu

Tapered pipe air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Last metre is tapered from Ø 16 mm to Ø 10 mm, material: AlMgSi• Matches stand system FangFix

5401986

101 VL2500

-

Lightning rod tapered, 2500mm, Aluminium, Alu

Tapered pipe air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Last metre is tapered from Ø 16 mm to Ø 10 mm, material: AlMgSi• Matches stand system FangFix

5401989

101 VL3000

-

Lightning rod tapered, 3000mm, Aluminium, Alu

Tapered pipe air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Last metre is tapered from Ø 16 mm to Ø 10 mm, material: AlMgSi• Matches stand system FangFix

5401993

101 VL3500

-

Tubular lightning rod tapered, 3,5m, Aluminium, Alu

Collector tip 101 VL3500, with 3.5m reduction Aluminum, Alu,

5401995

101 VL4000

-

Tubular lightning rod tapered, 4m, Aluminium, Alu

Tapered pipe air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• From a free length of > 2.5 m, an additional fastening, e.g. insulated spacer is recommended• Last metre is tapered from Ø 16 mm to Ø 10 mm, material: AlMgSi• Matches stand system FangFix

5402107

101 G1000

-

Interception/earth entry rods , 1000mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

5402158

101 G1500

-

Interception/earth entry rods , 1500mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Air-termination/earth entry rod with connection tabs and connector. • 1 attaching hole Ø 12 mm• With pre-mounted conductor for Rd 8-10• One end rounded

5402808

101 A-L100

-

Lightning rod with attaching lug, 1000mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Air-termination rod, one end rounded, M16 thread. • With thread M16 x 20• With connecting strap• Including pre-mounted connector type 5001 DIN for round conductor Rd 8-10• For stands with female thread M16

5402859

101 A-L150

-

Lightning rod with attaching lug, 1500mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Air-termination rod, one end rounded, M16 thread. • With thread M16 x 20• With connecting strap• Including pre-mounted connector type 5001 DIN for round conductor Rd 8-10• For stands with female thread M16

5402864

101 3B-4000

-

Lightning rod for tripod stand, 4000mm, Aluminium, Alu

isFang air-termination rod. • Suitable for wind loads according to Eurocode 1: DIN EN 1991-1-4• Tapered air-termination rod• Suitable for 40 mm isFang tripod stand and isFang support systems

5402872

101 3B-6000

-

Lightning rod for tripod stand, 6000mm, Aluminium, Alu

Pickup tip 101 3B-6000, for the tripod 6000mm Aluminum, Alu,