Mounting material for cable support system

5403100

TrayFix

-

SET FIXATION TrayFix

TrayFix mounting adapter for mesh cable trays on FangFix system. • Fastening system for the mounting of cable trays and mesh cable trays on FangFix block, e.g. cable routing on flat roofs• Adapted to OBO cable tray systems MKSM, SKSM and IKSM• Adapted to OBO mesh cable tray systems with a minimum width of 100 mm

5403102

TrayFix-10-S

-

SET FIXATION TrayFix-10-S

Stand – TrayFix set 10 S. • Mounting system for the fastening of mesh cable trays with the FangFix base, e.g. for cable routing on a flat roof.• Matches OBO mesh cable tray systems with a minimum width of 100 mm• Set consisting of TrayFix mounting adapter and concrete block incl. base for FangFix system 10 kg

5403099

TrayFix-16-S

-

SET FIXATION TrayFix-16-S

Stand – TrayFix set 16 S. • Mounting system for the fastening of mesh cable trays with the FangFix base, e.g. for cable routing on a flat roof.• Matches OBO mesh cable tray systems with a minimum width of 100 mm• Set consisting of TrayFix mounting adapter and concrete block incl. base for FangFix system 16 kg

6049256

DST110 BKRS FS

-

SUPPORT COVER ACCESS DST110 BKRS FS

DST110 BKRS FS cover holder, for BKS 110x70 Steel, St, galvanized band, DIN EN 10346

6049252

SB BKS FS

-

PLATE SIDE SHIELD SB BKS FS

Protective panel 108 FS. Protective panel, to be attached at the side as a collision guard for the walkable BKRS cable tray system. The side height is 108 mm.

6016278

MW 90 SL17 A2

-

90° installation angle for C-mesh cable tray, 170x170, Stainless steel, grade 304, VA, 1.4301

90° mounting angle A2. 90° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6016308

MW 90 SL23 A2

-

90° installation angle for C-mesh cable tray, 230x230, Stainless steel, grade 304, VA, 1.4301

90° mounting angle A2. 90° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6016421

K12 1818 A2

-

Wall fastening for mesh cable tray, 50x59, Stainless steel, grade 304, VA, 1.4301

Wall clamp/central hanger A2. Wall fixing for direct fixing of mesh cable trays of side height 55 mm on the wall.

6016443

WH GRM35 FT

-

Wall holder for GRM 35 50, 35x50, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Wall holder for GRM 35x50 FT mesh cable tray. Wall holder for wall fastening of mesh cable trays, type GRM 35 50.

6016445

WH GRM35 A4

-

Wall holder for GRM 35 50, 35x50, Stainless steel, grade 316, VA, 1.4401

Wall holder for GRM 35x50 A4 mesh cable tray. Wall holder for fastening of mesh cable trays GRM 35 50.

6016529

KS 23 35 A2

-

Clamping piece for C-mesh cable tray, M6x20, Stainless steel, grade 304, VA, 1.4301

Hold-down clamp A2. Clamp for mounting bracket, type MW 45 and MW 90.

6016665

BC GR 4.8 A2

-

Fastening clip mesh cable tray for MS profile, 82x33x17, Stainless steel, grade 301, VA, 1.4310

Clip connection tray BC GR 4.8 A2, for MS profile 82x33x17 Stainless steel 1.4310, V2A, 1.4310, Polished, with subsequent treatment

Fixing clip. Fixing clip for screwless mounting of grid trays on MS profiles with a groove width of 22 mm.

6016674

GKB 34 G

-

Clamping piece for mesh cable tray, Electrogalvanised, DIN 50961, Steel, St

GKB 34 G clamping piece, for steel grid tray, St, electro-galvanized, EN ISO 19598 / EN ISO 4042

G. Clamp for fixing grid trays with a width of 50 mm to the floor.

6016676

GKB 34 A2

-

Clamping piece for mesh cable tray, Stainless steel, grade 304, VA, 1.4301

Clamping piece A2. Clamp for fastening mesh cable trays of width 50 mm to the floor.

6016820

GKS 34 FT

-

Clamping piece for mesh cable tray, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Hold-down clamp FT. Hold-down clamp for fixing mesh cable trays to wall or support brackets.

6016839

GKS 34 A2

-

Clamping piece for mesh cable tray, Stainless steel, grade 304, VA, 1.4301

Clamping piece A2. Hold-down clamp for fixing mesh cable trays to wall or support brackets.

6016855

GKS 34 G

-

Clamping piece for mesh cable tray, Electrogalvanised, DIN 50961, Steel, St

Clamping piece G. Clamp for fixing mesh cable trays to wall or support brackets.

6016859

GKS 34 A4

-

Clamping piece for mesh cable tray, Stainless steel, grade 316, VA, 1.4401

Clamping piece A4. Clamping for fixing mesh cable trays to wall or support brackets.

6017037

GKT 38 G

-

Clamping piece barrier strip instal., Electrogalvanised, DIN 50961, Steel, St

Suj. p/ GKT 38 G grid tray, p/partition wall assembly Steel, St, electro-galvanized, EN ISO 19598 / EN ISO 4042

Clamp G. Fixing flange for fixing partitions on grid trays.

6017045

GKT 38 A2

-

Clamping piece barrier strip instal., Stainless steel, grade 304, VA, 1.4301

Suj. p/ GKT 38 A2 grating tray, p/ partition wall mounting Stainless steel 1.4301, A2, 1.4301, Polished, with post-treatment

A2 clamping piece. Fixing flange for fixing partition separators on grid trays.

6017061

GKT 38 FT

-

Clamping piece barrier strip instal., Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Hold-down clamp FT. Clamp for fixing barrier strips in mesh cable trays.

6017092

GKT 38 A4

-

Clamping piece divider mounting, special pack, Stainless steel, grade 316, VA, 1.4401

Hold-down clamp A4. Clamp for fastening separating retainers in mesh cable trays.

6017134

LKS 40 A2

-

Clamping piece for cable ladder LG45 and LG60, Stainless steel, grade 304, VA, 1.4301

Clamping piece LKS 40 A2. Hold-down clamp for fastening cable ladders.

6017320

MW 45 SL10 FT

-

45° installation angle for C-mesh cable tray, 178x103, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

45° mounting bracket FT. 45° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6017339

MW 45 SL10 A2

-

45° installation angle for C-mesh cable tray, 178x103, Stainless steel, grade 304, VA, 1.4301

45° mounting angle A2. 45° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6017347

MW 90 SL17 FT

-

90° installation angle for C-mesh cable tray, 170x170, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

90° mounting angle FT. 90° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6017355

MW 90 SL23 FT

-

90° installation angle for C-mesh cable tray, 230x230, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

90° mounting angle FT. 90° installation profile, vertical, for C mesh cable tray and GR-Magic® mesh cable tray with a side height of 55 mm.

6018963

TGK 30 42 FT

-

Carrier claw for IS 8 support, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Support claw. Support claw with truss-head bolt, type FRS M10 x 25 for mounting on the IS 8 support.

6115980

GAD OTD RW

-

Spacer for Design duct, Pure white, 9010, Polyamide, PA

Spacer. Spacer for insertion between the trunking covers of the GAD design device installation trunking series. The spacer ensures secure maintenance of a minimum spacing between trunking covers.

6115985

GAD OTD SW

-

Spacer for Design duct, Graphite black, 9011, Polyamide, PA

Spacer. Spacer for insertion between the trunking covers of the GAD design device installation trunking series. The spacer ensures secure maintenance of a minimum spacing between trunking covers.