Produkt wurde in den Korb gelegt
E3T-SL23M-M5J 0.3M NL
684163
OMRON
1
Photoelectric sensor, side view, limited 5 to 30 mm, Light-ON PNP, flat, M8-pigtail 0.3 m kabel
Photoelektrischer sensor, seitenansicht, begrenzt auf 5 bis 30 mm, Light-ON PNP, flat, M8-pigtail-0,3 m Kabel
Optische Sensoren > E3T
* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von OMRON
Danke für Ihr Interesse an unseren Produkten, wir hoffen die Lieferzeit ist ok.
Während der Bestellung können Sie den für Sie bestmöglichen Versand wählen: Express 24h, Standard 48h/72h, etc.
Klein dimensionierte optische Sensoren in Würfelbauform mit radialem (seitlichem) Lichtaustritt für eingeschränkte Platzverhältnisse.
Minimaler Hell/Dunkel-Fehler
Die Koaxialoptik und die kleine Vorsatzlinse der Modelle mit Reflexionslichtschranke ermöglichen die Erfassung kleiner Objekte (Durchmesser 2 mm) durch kleine Öffnungen (Durchmesser 2 mm).
Die einzigartige Form der Licht empfangenden Linse und die neue Chip-Montagetechnik ermöglichen die richtige Reich-/Tastweite für äußerst präzise und zuverlässige Erfassung selbst durch schmalste Schlitze und Lücken mit z. B. nur 0,5 mm Durchmesser.
Modelle mit M2- oder M3-Montagebohrungen.
Sensor type | Sensing distance | Connection method | Operation mode | Mounting screw | Order code | |||||
---|---|---|---|---|---|---|---|---|---|---|
NPN output | PNP output | |||||||||
Through-beam | 2 m | - | - | 2 m | For ordering pigtail versions replace '2M' of cable types with: - M1J: M12 with 30 cm cable - M3J: M8 4-pin with 30 cm cable - M5J: M8 3-pin with 30 cm cable | Light-ON | M2 | E3T-ST31 2M | E3T-ST33 2M | |
Dark-ON | M2 | E3T-ST32 2M | E3T-ST34 2M | |||||||
1 m | Light-ON | M2 | E3T-ST11 2M | E3T-ST13 2M | ||||||
M3 | E3T-ST11M 2M | E3T-ST13M 2M | ||||||||
Dark-ON | M2 | E3T-ST12 2M | E3T-ST14 2M | |||||||
M3 | E3T-ST12M 2M | E3T-ST14M 2M | ||||||||
300 mm | Light-ON | M2 | E3T-ST21 2M | E3T-ST23 2M | ||||||
M3 | E3T-ST21M 2M | E3T-ST23M 2M | ||||||||
Dark-ON | M2 | E3T-ST22 2M | E3T-ST24 2M | |||||||
M3 | E3T-ST22M 2M | E3T-ST24M 2M | ||||||||
Through-beam | 500 mm | Light-ON | M2 | E3T-FT11 2M | E3T-FT13 2M | |||||
Dark-ON | M2 | E3T-FT12 2M | E3T-FT14 2M | |||||||
300 mm | Light-ON | M2 | E3T-FT21 2M | E3T-FT23 2M | ||||||
Dark-ON | M2 | E3T-FT22 2M | E3T-FT24 2M | |||||||
Retro-reflective | 30 to 200 mmon reflectors/ 10 to 100 mmon reflective foils | Light-ON | M2 | E3T-SR41-C 2M | E3T-SR43-C 2M | |||||
Dark-ON | M2 | E3T-SR42-C 2M | E3T-SR44-C 2M | |||||||
Diffuse-reflective | 5 to 30 mm | Light-ON | M2 | E3T-FD11 2M | E3T-FD13 2M | |||||
M3 | E3T-FD11M 2M | E3T-FD13M 2M | ||||||||
Dark-ON | M2 | E3T-FD12 2M | E3T-FD14 2M | |||||||
M3 | E3T-FD12M 2M | E3T-FD14M 2M | ||||||||
Limited-reflective | 5 to 15 mm | Light-ON | M2 | E3T-SL11 2M | E3T-SL13 2M | |||||
M3 | E3T-SL11M 2M | E3T-SL13M 2M | ||||||||
Dark-ON | M2 | E3T-SL12 2M | E3T-SL14 2M | |||||||
M3 | E3T-SL12M 2M | E3T-SL14M 2M | ||||||||
5 to 30 mm | Light-ON | M2 | E3T-SL21 2M | E3T-SL23 2M | ||||||
M3 | E3T-SL21M 2M | E3T-SL23M 2M | ||||||||
Dark-ON | M2 | E3T-SL22 2M | E3T-SL24 2M | |||||||
M3 | E3T-SL22M 2M | E3T-SL24M 2M | ||||||||
Diffuse-reflective | 1 to 15 mm | Light-ON | M2 | E3T-FL11 2M | E3T-FL13 2M | |||||
Dark-ON | M2 | E3T-FL12 2M | E3T-FL14 2M | |||||||
1 to 30 mm | Light-ON | M2 | E3T-FL21 2M | E3T-FL23 2M | ||||||
Dark-ON | M2 | E3T-FL22 2M | E3T-FL24 2M |
Item | Through-beam | Retro-reflective | ||
---|---|---|---|---|
Side-view | Flat | Side-view | ||
E3T-ST1 | E3T-FT1 | E3T-SR4 | ||
Sensing distance | E3T-ST3_: 2 m E3T-ST1_: 1 m E3T-ST2_: 300 mm | E3T-FT1_: 500 mm E3T-FT2_: 300 mm | 30 to 200 mm (with E39-R4) 10 to 100 mm (with E39-R37-CA) | |
Light source (wave length) | Red LED (“Pin-point” LED) λ = 650 nm | |||
Power supply voltage | 12 to 24 VDC±10%, ripple (p-p) 10% max. | |||
Protective circuits | Power supply and control output reverse polarity protection | Power supply and control output reverse polarity protection | ||
Response time | 1 ms max. | |||
Ambient temperature | Operating | -25 to 55°C (with no icing or condensation) | ||
Storage | -40 to 70°C (with no icing or condensation) | |||
Degree of protection | IEC60529 IP67 | |||
Material | Case | PBT (polybutylene terephthalate) | ||
Display window | Denatured polyarylate | |||
Lens | Denatured polyarylate | Methacrylic resin |
Item | Diffuse-reflective | Limited-reflective | Diffuse-reflective (background suppression) | |||
---|---|---|---|---|---|---|
Flat | Side-view | Flat | ||||
E3T-FD1 | E3T-SL1 | E3T-SL2 | E3T-FL1 | E3T-FL2 | ||
Sensing distance | 5 to 30 mm | 5 to 15 mm | 5 to 30 mm | 1 to 15 mm | 1 to 30 mm | |
Black/white error | - | 15% max. | ||||
Light source (wave length) | Red LED (“Pin-point” LED) λ = 650 nm | |||||
Power supply voltage | 12 to 24 VDC±10%, ripple (p-p) 10% max. | |||||
Protective circuits | Power supply and control output reverse polarity protection | |||||
Response time | 1 ms max. | |||||
Ambient temperature | Operating | -25 to 55°C | ||||
Storage | -40 to 70°C (with no icing or condensation) | |||||
Degree of protection | IEC60529 IP67 | |||||
Material | Case | PBT (polybutylene terephthalate) | ||||
Display window | Denatured polyarylate | |||||
Lens | Denatured polyarylate |
1.For pre-wired models with robotic cables add '-R' to the order code (example: E3T-FT21R 2M)
2.The distances are measured with reflector E39-R4 and reflective foil E39-R37-CA. For applications with shorter distances between the sensor and the reflector contact your OMRON representative.
3.Order reflector separately. Models with included reflectors are available.
Titel: | Größe: | Typ: |
---|---|---|
PDF CATALOGO OMRON AUTOMATION EN.pdf | 28 Mbytes | |
PDF KATALOG OMRON DE.pdf | 91 Mbytes |
Es gibt keine Produktbewertungenvor.
Wertung: | |
Name: | |
E-Mail : | |
Betreff: | |
Text: | |
Haben Sie dieses Produkt empfehlen zu kaufen? | |
Bewertung abgeben |
Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.