BH4-DD10V2-230 CARLO GAVAZZI Parametri selezionati Altro INFO1 Variatore INFO2 H4 (W72) INFO3 230 VCA INFO4 ..

Daylight Controller, 2 Outputs
BH4-DD10V2-230
Switching and daylight regulation of adjustable ballasts 1 to 10 V For maintaining a constant brightness level in rooms/offices
8 control-channel receiver
For DIN-rail mounting
LED-indications for smart-house carrier and outputs
Lamp-protective soft-start function
Channel coding by BGP-COD-BAT
Transmits the status of the dimming outputs
OUTPUT SPECIFICATIONS
Ballast outputs 2
Dimming capacity 2 x 1 to 10 V Max. load capacity 50 mA
Dimming speed 23 s (10% - 100%) Delay before start of dimming 9 s
Relay outputs
Max. switching voltage 250 VAC
Load capacity 10 A
Response time 2 cycle:
≤ 272 ms @ 128 channels)
SUPPLY SPECIFICATIONS
Power Supply
Rated operational voltage 230 VAC ±10% Power consumption 2 VA
Power dissipation Max. 4.5 W Frequency 50/60 Hz
TYPE SELECTION
Supply Ordering no.
230 VAC BH4-DD10V2-230
GENERAL SPECIFICATIONS
Power ON delay ≤ 1 s
Indication for
Power On LED, green smart-house carrier LED, yellow Output On, Dimmer output 1 LED, red
Output On, Dimmer output 2 LED, red
Environment
Degree of protection IP20
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (32° to +122°F) Storage temperature -20° to +85°C (-4° to +185°F)
Humidity (non-condensing) Max. 85%
Mechanical resistance
Shock 15 g (11 ms) Vibration 2 g (6 to 55 Hz)
Dimensions
Material H4-housing
Weight 250 g
Standards IEC 60669, EN 55022/
EN 50081-1 and EN 55024/ EN 50082-1
WIRING DIAGRAM DIMENSIONS (mm)
D+
2 VA D-
+ - + -
1 2 3 4
5 6 7 8
Output
Dimmer 1
Output
Dimmer 2
1 2
21 22 23
24 25
26 27 28
L N
Specifications are subject to change without notice (10.05.2010) - A product of the CARLO GAVAZZI Group