Daylight Controller, 2 Outputs BH4-DD10V2-230 Switching and daylight regulation of adjustable ballasts 1 to 10 V For maintaining a constant brightness level in rooms/offices 8 control-channel receiver For DIN-rail mounting LED-indications for smart-house carrier and outputs Lamp-protective soft-start function Channel coding by BGP-COD-BAT Transmits the status of the dimming outputs OUTPUT SPECIFICATIONS Ballast outputs 2 Dimming capacity 2 x 1 to 10 V Max. load capacity50 mA Dimming speed 23 s (10% - 100%) Delay before start of dimming9 s Relay outputs Max. switching voltage250 VAC Load capacity 10 A Response time2 cycle: ≤ 272 ms @ 128 channels) SUPPLY SPECIFICATIONS Power Supply Rated operational voltage230 VAC ±10% Power consumption 2 VA Power dissipation Max. 4.5 W Frequency50/60 Hz TYPE SELECTION SupplyOrdering no. 230 VAC BH4-DD10V2-230 GENERAL SPECIFICATIONS Power ON delay≤ 1 s Indication for Power OnLED, green smart-house carrierLED, yellow Output On, Dimmer output 1LED, red Output On, Dimmer output 2LED, red Environment Degree of protectionIP20 Pollution degree 3 (IEC 60664) Operating temperature 0° to +50°C (32° to +122°F) Storage temperature -20° to +85°C (-4° to +185°F) Humidity (non-condensing)Max. 85% Mechanical resistance Shock15 g (11 ms) Vibration2 g (6 to 55 Hz) Dimensions Material H4-housing Weight 250 g Standards IEC 60669, EN 55022/ EN 50081-1 and EN 55024/ EN 50082-1 WIRING DIAGRAM DIMENSIONS (mm) D+ 2 VA D- +-+- 1234 5 678 Output Dimmer 1 Output Dimmer 2 1 2 21 22 23 2425 262728 L N Specifications are subject to change without notice (10.05.2010) - A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.