G82113315 CARLO GAVAZZI Parametri selezionati Altro

Dupline®
Humidity and Temperature Sensor
Du line®
Type G 8211 3315
Fieldbus Installationbus
• AnaLink humidity transmitter
• Humidity range: 5 - 95% RH, precision within ± 3% RH
• AnaLink temperature transmitter
• Temperature range: 0 - 50°C, precision within ± 1°C
• Channel coding by GAP 1605
• Supplied by Dupline®
Product Description
Ordering Key
G 8211 3315
G8211 3315 is a humidity and temperature sensor for measuring relative humidity and temperature in a single room. The sensor measures the values and transmits the values to the controller G38xx xxx.
Type Selection
The transmitted values can be used for ventilator control e.g. in bathrooms. G8211 3315 is part of the Dupline® building automa- tion concept.
Type: Dupline® Opus housing Transmitter
3 channels
2 inputs/1 output
Humidity sensor
General Specifications
Supply Colour Ordering no.
Dupline® White G 8211 3315
Input Specifications
Sensor 1 integrated Humidity and Temperature sensor (Factory calibrated)
Temperature range 0 to +50°C (32 to +122°F) Precision ± 1°C
Humidity range 5 - 95% RH Precision ± 3% RH
Mode of Operation
Channel programming By GAP 1605
No. of channels 3
Housing LK OPUS
Environment
Degree of protection IP 20
Operating temperature 0 to 50 °C (32 to 122°F) Storage temperature -20 to 70°C (-4 to 158°F)
Supply Specifications
Power supply Supplied by Dupline®
Consumption
LED off < 1 mA LED on < 2.5 mA
Dimensions
Channel Programming
Using the GAP 1605 programming unit, each of the
3 channels on the sensor can be assigned any address between A1 and P8. The
programming socket can be accessed by removing the front of the housing. The
allocation of the channels is 66 28
as follows:
Channel Description
1 Humidity channel (Analink out)
2 Temperature channel (Analink out)
3 LED control (In)
Note: Leave unwanted channels unprogrammed.
Specifications are subject to change without notice (22.12.2010) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group