Dupline® Humidity and Temperature Sensor Duline® Type G 8211 3315 FieldbusInstallationbus • AnaLink humidity transmitter • Humidity range: 5 - 95% RH, precision within ± 3% RH • AnaLink temperature transmitter • Temperature range: 0 - 50°C, precision within ± 1°C • Channel coding by GAP 1605 • Supplied by Dupline® Product Description Ordering Key G 8211 3315 G8211 3315 is a humidity and temperature sensor for measuring relative humidity and temperature in a single room. The sensor measures the values and transmits the values to the controller G38xx xxx. Type Selection The transmittedvalues can beusedforventilator control e.g. in bathrooms. G8211 3315is partofthe Dupline® building automa- tion concept. Type: Dupline® Opus housing Transmitter 3 channels 2 inputs/1 output Humidity sensor General Specifications Supply ColourOrdering no. Dupline®WhiteG 8211 3315 Input Specifications Sensor1 integrated Humidity and Temperature sensor (Factory calibrated) Temperature range0 to +50°C (32 to +122°F) Precision ± 1°C Humidity range 5 - 95% RH Precision ± 3% RH Mode of Operation Channel programmingBy GAP 1605 No. of channels 3 Housing LK OPUS Environment Degree of protection IP 20 Operating temperature0 to 50 °C (32 to 122°F) Storage temperature -20 to 70°C (-4 to 158°F) Supply Specifications Power supplySupplied by Dupline® Consumption LED off< 1 mA LED on< 2.5 mA Dimensions Channel Programming Using the GAP 1605 programming unit, each of the 3 channels on the sensor can be assigned any address betweenA1andP8.The programmingsocketcan be accessed by removing the front ofthehousing.The allocationof the channels is66 28 as follows: Channel Description 1 Humidity channel (Analink out) 2 Temperature channel (Analink out) 3 LED control (In) Note: Leave unwanted channels unprogrammed. Specifications are subject to change without notice (22.12.2010) 1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.