KNX-EIB

LGS/A 1.1

LGS/A1.1

-

Sensor de Calidad de Aire, SM

LK/S 4.2

2CDG110171R0011

-

Acoplador de Línea, MDRC

ACOPLADOR DE LINEA

The ABB i-bus® KNX Line Coupler LK/S 4.2 is a modular installation device with a module width of 2 space units. It is used as a line or area coupler or as a repeater. As a line coupler, the LK/S connects a line with a main line, as an area coupler it connects a main line with an area line. It provides electrical isolation in this way. In connection with ETS4, the main groups 14...31 can be filtered. The device supports long frames (from > ETS5) and KNX Data Secure communication. KNX Data Secure telegrams are processed, filtered, forwarded, or blocked depending on settings.

LL/S 1.1

GHQ6050053R0001

-

Interface de Fibra óptica, MDRC

INTERFACE COMUNICACION F.OPTIC

The device is used to couple two sections of an bus line using an optical fibre link. Ideal for bridging longer distances or to avoid having to implement lightning and overvoltage protection when laying cables between buildings. Two devices are needed to complete a transmission link.

LM/S 1.1

GHQ6310080R0111

-

Módulo Lógico, MDRC

UNIDAD PARA FUNCIONES LOGICAS

Used to solve a varied range of project-specific control tasks and can implement 3 functions simultaneously. The following functions are available for selection: logic gate, filter, time delay, multiplier, min/max value detector, temperature comparator, toggle values, threshold detection, format converter, scenes, increment/decrement values, staircase lighting.

LR/S 2.16.1

2CDG110087R0011

-

Regulador de Luz, 2 canales, 16 A, MDRC

REGULADOR DIN 2 CANAL 16A

Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.

LR/S 4.16.1

2CDG110088R0011

-

Regulador de Luz, 4 canales, 16 A, MDRC

REGULADOR DIN 4 CANAL 16A

Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.

MG/A 4.4.1

2CDG110186R0011

-

Módulo de Zona de 4 canales

MÓDULO DE ZONA DE 4 CANALES

to connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 zones to which several detectors can be connected. The status of each zone is displayed with a status LED. The Zone Module delivers the control signals and the supply voltage for the external detectors. There is no need for an external voltage supply, the Zone Modules are supplied via the Security-Bus.

MG/E 4.4.1

2CDG110178R0011

-

Módulo de Zona de 4 canales

MÓDULO DE ZONA DE 4 CANALES

to connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 zones to which several detectors can be connected. The status of each zone is displayed with a status LED. The Zone Module delivers the control signals and the supply voltage for the external detectors. There is no need for an external voltage supply, the Zone Modules are supplied via the Security-Bus.

SA/M 2.16.1

2CDG110100R0011

-

Módulo Actuador Interruptor, 2 canales, 16A, Contactos Libres de Potencial

ACT. BIN. 2S, 16A, PARA RC/A

Switches up to 16 A with two floating relay contacts. The feeding voltage is independent from the Room Controller Basis Device. It must thus be applied directly to the module.

SA/M 2.6.1

2CDG110002R0011

-

Módulo Actuador Interruptor, 2 canales, 6A

ACTUADOR BINARIO 2 SALIDAS 16A

Module for plugging into the Room Controller Basis Device. It switches currents up to 16 A with two relays. The maximum continuous current is 6 A.