MACX MCR-SL-TC-I-NC 2924346 PHOENIX CONTACT Temperature transducer, converts signals from thermocouples and .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MACX MCR-SL-TC-I-NC 2924346 PHOENIX CONTACT Temperature transducer, converts signals from thermocouples and ..

MACX MCR-SL-TC-I-NC

2924346

PHOENIX_CONTACT

Available

Ship on today

Temperature transducer, converts signals from thermocouples and linear mV sources into 0/4-20 mA signals. Freely programmable, 3-way electrical isolation, custom-configured.

More details


Programmable Logic Controllers Plcs

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$243.91
2+$238.16
3+$235.31
4+$234.60
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Dimensions

Width12.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Maximum altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Degree of protectionIP20

Input data

Sensor types that can be used (TC)E, J, K, N as per IEC / EN 60584, L as per DIN 43760
Temperature measuring range-250 °C ... 1372 °C (Range depending on the sensor type)
Input signal range-20 mV ... 70 mV
Measuring range spanMin. 50 K for thermocouples, 3 mV for mV sources

Output data

Signal outputCurrent output
Current output signal0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current outputmax. 500 Ω
Output ripple (current)< 50 µAPP
Behavior in the event of a sensor errorAs per NE 43 or can be freely defined

Power supply

Nominal supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (24 V DC (-20% ... +25%))
Max. current consumption< 40 mA (24 V DC)
Power consumption< 1 W

Connection data

Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Stripping length7 mm
Screw threadM3
Connection methodScrew connection
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm

General

No. of channels1
Temperature coefficient, typical0.01 %/K
Typical cold point errors± 1 K
Step response (0–99%)typ. 700 ms
≤ 1100 ms
Alignment zero± 5 %
Alignment span± 5 %
Status displayGreen LED (supply voltage, PWR)
Red LED, flashing (line, sensor error, ERR)
Red LED (module error, ERR)
Flammability rating according to UL 94V0
Pollution degree2
Overvoltage categoryII
Emitted interferenceEN 61000-6-4
Housing materialPA 66-FR
Colorgreen
DesignationInput/output/power supply
Electrical isolation300 Vrms (Rated insulation voltage (overvoltage category II; pollution degree 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
DesignationInput/output
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
DesignationInput/power supply
Electrical isolation375 V (Peak value in accordance with EN 60079-11)
ConformanceCE-compliant, additionally EN 61326-1
ATEXEx II 3G Ex nA ic IIC T4 Gc X
UL, USA / CanadaUL 508 Listed
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
GLC, EMC1

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2924346-MACX MCR-SL-TC-I-NCEnglish133 KbytesPHOENIX CONTACT-2924346-MACX MCR-SL-TC-I-NC

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or