Product successfully added to your shopping cart
FLS DN M12 DIO 8/8 M12
2736398
PHOENIX_CONTACT
1
The stand-alone device for DeviceNet™ has 8 digital inputs and 8 digital outputs each with a load capacity of 500 mA. The M12 connection is established using fast connection technology. The 24 V DC supply is protected against short circuit and overload.
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Width | 60 mm |
---|---|
Height | 178 mm |
Depth | 49.3 mm |
Drill hole spacing | 168 mm |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (storage/transport) | 95 % |
Air pressure (operation) | 80 kPa ... 106 kPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP65/IP67 |
Net weight | 340 g |
---|---|
Mounting type | Wall mounting |
Fieldbus system | DeviceNet™ |
---|---|
Designation | DeviceNet™ |
Connection method | 2 M12 connectors, A-coded |
Transmission speed | 125 kBit/s, 250 kBit/s, 500 kBit/s (Automatic baud rate detection) |
Transmission physics | Copper cable in acc. with DeviceNet™ specification |
Address area assignment | 0 ... 63, can be set |
Number of positions | 5 |
Connection method | M12 connector, (A-coded) |
---|---|
Designation | UL |
Supply voltage | 24 V DC |
Supply voltage range | 12 V DC ... 30 V DC (including ripple) |
Voltage supply UL | 24 V DC |
---|---|
Power supply at UL | max. 4 A |
Current consumption from UL | typ. 60 mA |
max. 100 mA | |
Voltage supply US | 24 V DC |
Power supply at US | max. 4 A |
Current consumption from US | typ. 10 mA (plus sensor current) |
max. 500 mA | |
Voltage supply UA11 | 24 V DC |
Power supply at UA11 | max. 4 A |
Current consumption at UA11 | typ. 6 mA (plus actuator current) |
max. 4 A | |
Voltage supply UA12 | 24 V DC |
Power supply at UA12 | max. 4 A |
Current consumption at UA12 | typ. 6 mA (plus actuator current) |
max. 4 A |
Input name | Digital inputs |
---|---|
Connection method | M12 connector, double occupancy |
2, 3, 4-wire | |
Number of inputs | 8 |
Protective circuit | Protection against polarity reversal |
Filter time | 3 ms |
Input characteristic curve | IEC 61131-2 type 1 |
Input voltage | 24 V DC |
Input voltage range "0" signal | -30 V DC ... 5 V DC |
Input voltage range "1" signal | 13 V DC ... 30 V DC |
Output name | Digital outputs |
---|---|
Connection method | M12 connector, double occupancy |
2, 3-wire | |
Number of outputs | 8 |
Protective circuit | Short-circuit protection |
Output voltage | 24 V DC |
Maximum output current per channel | 500 mA |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes | |
PHOENIX CONTACT-2736398-FLS DN M12 DIO 8/8 M12 | 146 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.