PSR-SCP- 24DC/TS/SDOR4/4X1 2986096 PHOENIX CONTACT Extension module View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-SCP- 24DC/TS/SDOR4/4X1 2986096 PHOENIX CONTACT Extension module

PSR-SCP- 24DC/TS/SDOR4/4X1

2986096

PHOENIX_CONTACT

Extension module

More details


Safety

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Total price: $619.44
Unit price: $619.44

Quantity Price
1+$619.44
2+$619.45
*This price is per unit and is the net value (not including taxes if applicable).

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



Key Commercial Data

Orderkey2986096
Packing unit1 pc
Catalog pagePage 294 (C-6-2017)
GTIN4046356536554
Weight per Piece (excluding packing)220.000 g
Custom tariff number85371098
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width22.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-20 °C ... 55 °C (see to derating)
Ambient temperature (storage/transport)-20 °C ... 70 °C
Max. permissible relative humidity (operation)75 % (On average, 85 % occasionally)
Max. permissible humidity (storage/transport)75 % (On average, 85 % occasionally)
Air pressure (operation)70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3500 m above sea level)
Maximum altitudemax. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")

Power supply

Rated control circuit supply voltage US24 V DC (Electrical supply via PSR-TBUS)
18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Rated control supply current ISElectrical supply via PSR-TBUS
74 mA (At 24 V DC, relay outputs set)
54 mA (At 24 V DC, relay outputs not set)
Status display1 x green LED, 1 x red LED
Protective circuitYes, within the scope of the operating voltage limits

Relay outputs: enabling current path

Output descriptionRelay contacts, safety-related N/O contacts
Number of outputs4 (Single-channel)
2 (Two-channel, connected in pairs)
Contact type4 relay output contacts
Contact materialAgSnO2(From HW03)
AgCuNi + 0.2 - 0.4 μm Au (up to HW02)
Switching voltagemin. 12 V AC/DC (from HW 03)
min. 5 V AC/DC (Up to HW02)
max. 250 V AC/DC
Limiting continuous current4 A (see to derating)
Switching currentmin. 3 mA (from HW 03)
min. 5 mA (Up to HW02)
Switching capacitymin. 60 mW
Mechanical service life10x 106cycles
Output fuse6 A (gL / gG)
4 A (gL/gG for low-demand applications)
Status display4 x green LEDs

Alarm outputs

Output descriptionDigital
Number of outputs4
Voltage24 V DC (Supply via A1/A2)
Limiting continuous current50 mA
Type of protectionYes, within the scope of the operating voltage limits
Short-circuit protectionYes

Times

Response timemax. 50 ms
Recovery time< 10 s

General

Nominal operating mode100% operating factor
Net weight220 g
Mounting positionOn horizontal DIN rail
Mounting typeDIN rail mounting
Degree of protectionIP20
IP54
Min. degree of protection of inst. locationIP54
Housing materialPolyamide PA non-reinforced
Housing coloryellow

Connection data

Connection methodScrew connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3
Torque0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.

Safety-related characteristic data

Stop category0
DesignationIEC 61508 - High demand
Safety Integrity Level (SIL)1 (1-channel parameterization)
3 (2-channel parameterization)
DesignationIEC 61508 - Low demand
Safety Integrity Level (SIL)1 (1-channel parameterization)
3 (2-channel parameterization)
DesignationEN ISO 13849
Performance level (PL)c (1-channel parameterization)
e (2-channel parameterization)
Category1 (1-channel parameterization)
4 (2-channel parameterization)
DesignationEN 62061
Safety Integrity Level Claim Limit (SIL CL)1 (1-channel parameterization)
3 (2-channel parameterization)
DesignationEN 50156
Safety Integrity Level (SIL)max. 3 (Reference IEC 61508)

Standards and Regulations

DesignationAir clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
Rated insulation voltage250 V AC
Rated surge voltage/insulation4 kV / basic insulation between output contact current paths (13/14, 23/24, 33/34, 43/44); 6 kV / safe isolation, reinforced insulation between output contact current paths (13/14, 23/24, 33/34, 43/44) and the other circuits
Degree of pollution2
Overvoltage categoryIII
Vibration (operation)2g
Shock (operation)10g (Δt = 11 ms, three shocks in each space direction)
10g (Δt = 16 ms, continuous shock, 1000 shocks in each space direction)

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.