SWD4-RC8-10 116020 EATON MOELLER Bus termination, SmartWire-DT, for flat cable View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

SWD4-RC8-10 116020 EATON MOELLER Bus termination, SmartWire-DT, for flat cable





Ship on today

Bus termination, SmartWire-DT, for flat cable

More details

Programmable Relays



* Brand new produt in its original packing covered by the warranties and certifications provided by EATON - MOELLER

*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal

Related products

More info

Delivery programme
Product range
  SmartWire-DT accessories
Basic function
  Network terminator
  For the SmartWire-DT bus termination resistor on the SmartWire-DT ribbon cable
  SmartWire-DT bus termination resistor; plugged onto SWD4-8MF2 blade terminal at the end of the SmartWire-DT ribbon cable
Connection to SmartWire-DT
For use with
For use with
  for 8 pole ribbon cable
Protection type (IEC/EN 60529, EN50178, VBG 4)
Technical data
  IEC/EN 61131-2
EN 50178
Dimensions (W x H x D)
 mm48.5 x 34.5 x 10
Mounting position
  As required
Power loss
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
Vibrations (IEC/EN 61131-2:2008)
Constant amplitude 3,5 mm
constant amplitude 0.15 mm max.
Constant amplitude 0.15 mm min. (RefExtrakt)
Constant acceleration 1 g
constant acceleration 1 g max.
constant acceleration 1 g min.
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
Drop to IEC/EN 60068-2-31
Drop heightmm50
Free fall, packaged (IEC/EN 60068-2-32)
Electromagnetic compatibility (EMC)
Overvoltage category
Pollution degree
Electrostatic discharge (IEC/EN 61131-2:2008)
Air discharge (Level 3)
Contact discharge (Level 2)
Electromagnetic fields (IEC/EN 61131-2:2008)
2 - 2.7 GHz
1.4 - 2 GHz
80 - 1000 MHz
Radio interference suppression
  Class A
Burst (IEC/EN 61131-2:2008, Level 3)
SmartWire-DT cables
Radiated RFI (IEC/EN 61131-2:2008, Level 3)
Climatic environmental conditions
Climatic proofing
  Dry heat to IEC 60068-2-2
Damp heat as per EN 60068-2-3
Air pressure (operation)
 hPa795 - 1080
Ambient temperature
ϑ°C-25 - +55
Storage / Transport
ϑ°C-40 - +70
Relative humidity
  Take appropriate measures to prevent condensation
Relative humidity, non-condensing (IEC/EN 60068-2-30)
 %5 - 95
Connection options
Connection 1
  Plug, 8-pole
Number of insertion cycles
  ≥ 200
Current consumption
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
Rated operational current for specified heat dissipation
Heat dissipation per pole, current-dependent
Equipment heat dissipation, current-dependent
Static heat dissipation, non-current-dependent
Heat dissipation capacity
Operating ambient temperature min.
Operating ambient temperature max.
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance
  Meets the product standard's requirements. Verification of thermal stability of enclosures
  Meets the product standard's requirements. Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements. Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
PLC's (EG000024) / Accessories for controls (EC002584)
Electric engineering, automation, process control engineering / Control / Control (accessories) / Control (accessories, unspecified) ([email protected] [AKN560011])
Type of electrical accessory
Type of mechanical accessory
Type of documentation
UL File No.  E29184
UL Category Control No.  NKCR
CSA File No.  2324643
CSA Class No.  3211-07
North America Certification  UL listed, CSA certified
Specially designed for North America  No
IL04716001Z (AWA1160-2512) SmartWire-DT: Wiring material and accessories

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait

* Required fields