PT-65D PT65D MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 5, V2: 12, A2: 4, V3: 24, A3: .. Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

PT-65D PT65D MEANWELL Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 5, V2: 12, A2: 4, V3: 24, A3: ..

PT-65D

PT65D

MEANWELL

Verfügbar

Schiff am heute

Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 5, V2: 12, A2: 4, V3: 24, A3: 1,3

Mehr Infos


Spannungsversorgungen

OPEN FRAME

PT

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

MengePreis
1+$22.49
13+$20.13
26+$19.63
38+$19.40
51+$19.24
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



6 5 W Tr i p l e O u t p u t S w i t c h i n g P o w e r S u p p l y 6 5 W Tr i p l e O u t p u t S w i t c h i n g P o w e r S u p p l y
6 5 W Tr i p l e O u t p u t S w i t c h i n g P o w e r S u p p l y P T - 6 5 s e r i e s P T - 6 5 s e r i e s
P T - 6 5 s e r i e s Features : Features :
Features : Universal AC input/Full range Universal AC input/Full range
Universal AC input/Full range Low leakage current<0.5mA Low leakage current<0.5mA
Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Protections: Short circuit / Overload / Over voltage
Protections: Short circuit / Overload / Over voltage Cooling by freeair convection Cooling by freeair convection
Cooling by freeair convection 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Fixed switching frequency at 65KHz Fixed switching frequency at 65KHz
Fixed switching frequency at 65KHz 2 yearswarranty 2 yearswarranty
2 yearswarrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL PT-65APT-65BPT-65CPT-65D PT-65APT-65BPT-65CPT-65D
PT-65APT-65BPT-65CPT-65D OUTPUT NUMBER OUTPUT NUMBER
OUTPUT NUMBER CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH1 CH3 CH1
CH3 CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 5V 12V 5V 12V
5V 12V -5V 5V -5V 5V
-5V 5V 12V 12V
12V -12V 5V -12V 5V
-12V 5V 15V 15V
15V -15V 5V -15V 5V
-15V 5V 12V 12V
12V 24V 24V
24V RATED CURRENT RATED CURRENT
RATED CURRENT 5.5A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A 5.5A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A
5.5A 2.5A 0.5A 5.5A 2.5A 0.5A 5.5A 2A 0.5A4A 2A 1A 0.5A4A 2A 1A
0.5A4A 2A 1A CURRENT RANGE RATED POWER CURRENT RANGE RATED POWER
CURRENT RANGE RATED POWER 0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 2.6A 0 - 0.7A0.5 - 5A0.2 - 4A0.2 - 1.3A 0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 2.6A 0 - 0.7A0.5 - 5A0.2 - 4A0.2 - 1.3A
0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 3.2A 0 - 0.7A0.4 - 7A0.2 - 2.6A 0 - 0.7A0.5 - 5A0.2 - 4A0.2 - 1.3A 60W63.5W 65W68W 60W63.5W 65W68W
60W63.5W 65W68WOUTPUT OUTPUT
OUTPUT OUTPUT POWER (max.)Ratedoutputpower for convection; 72W with 18CFM min. Forced air OUTPUT POWER (max.)Ratedoutputpower for convection; 72W with 18CFM min. Forced air
OUTPUT POWER (max.)Ratedoutputpower for convection; 72W with 18CFM min. Forced air RIPPLE & NOISE (max.)Note.250mVp-p 120mVp-p50mVp-p 50mVp-p 120mVp-p100mVp-p50mVp-p 120mVp-p100mVp-p50mVp-p 100mVp-p200mVp-p RIPPLE & NOISE (max.)Note.250mVp-p 120mVp-p50mVp-p 50mVp-p 120mVp-p100mVp-p50mVp-p 120mVp-p100mVp-p50mVp-p 100mVp-p200mVp-p
RIPPLE & NOISE (max.)Note.250mVp-p 120mVp-p50mVp-p 50mVp-p 120mVp-p100mVp-p50mVp-p 120mVp-p100mVp-p50mVp-p 100mVp-p200mVp-p VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1:4.75 - 5.5V CH1:4.75 - 5.5V
CH1:4.75 - 5.5V VOLTAGE TOLERANCENote.34.0% 7.0% 5.0% 4.0% 7.0%5.0%4.0%7.0%5.0%4.0%6.0%6.0% VOLTAGE TOLERANCENote.34.0% 7.0% 5.0% 4.0% 7.0%5.0%4.0%7.0%5.0%4.0%6.0%6.0%
VOLTAGE TOLERANCENote.34.0% 7.0% 5.0% 4.0% 7.0%5.0%4.0%7.0%5.0%4.0%6.0%6.0% LINE REGULATION 1.0% 2.0% 1.0% 1.0% 2.0%1.0%1.0%2.0%1.0%1.0%2.0%3.0% LINE REGULATION 1.0% 2.0% 1.0% 1.0% 2.0%1.0%1.0%2.0%1.0%1.0%2.0%3.0%
LINE REGULATION 1.0% 2.0% 1.0% 1.0% 2.0%1.0%1.0%2.0%1.0%1.0%2.0%3.0% LOAD REGULATION 3.0% 4.0% LOAD REGULATION 3.0% 4.0%
LOAD REGULATION 3.0% 4.0% 1.0% 3.0% 4.0%1.0%3.0%4.0%1.0%2.0%5.0%5.0% 1.0% 3.0% 4.0%1.0%3.0%4.0%1.0%2.0%5.0%5.0%
1.0% 3.0% 4.0%1.0%3.0%4.0%1.0%2.0%5.0%5.0%INPUT INPUT
INPUTPROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.)
SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT
AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVERLOAD
OVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY WORKING HUMIDITY STORAGE TEMP., HUMIDITY
WORKING HUMIDITY STORAGE TEMP., HUMIDITY 800ms, 20ms at full load 800ms, 20ms at full load
800ms, 20ms at full load 60ms at full load 60ms at full load
60ms at full load 90 - 264VAC127 -370VDC 90 - 264VAC127 -370VDC
90 - 264VAC127 -370VDC 47 - 440Hz 47 - 440Hz
47 - 440Hz 76%77%77%79% 76%77%77%79%
76%77%77%79% 1.5A/115VAC0.9A/230VAC 1.5A/115VAC0.9A/230VAC
1.5A/115VAC0.9A/230VAC COLD START 20A/115VAC 40A/230VAC COLD START 20A/115VAC 40A/230VAC
COLD START 20A/115VAC 40A/230VAC <0.75mA <0.75mA
<0.75mA 73 - 95W rated output power 74.8 - 98.6W rated output power 73 - 95W rated output power 74.8 - 98.6W rated output power
73 - 95W rated output power 74.8 - 98.6W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Protection type : Hiccup mode, recovers automatically after fault condition is removed. 5.75 - 6.75VDC on CH1 5.75 - 6.75VDC on CH1
5.75 - 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed. Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 - +60(Refer to "Derating Curve") -10 - +60(Refer to "Derating Curve")
-10 - +60(Refer to "Derating Curve") 20 - 90% RH non-condensing 20 - 90% RH non-condensing
20 - 90% RH non-condensing -20 - +85 , 10 - 95% RH -20 - +85 , 10 - 95% RH
-20 - +85 , 10 - 95% RH TEMP. COEFFICIENT 0.04%/ (0 - 50 ) on +5V output TEMP. COEFFICIENT 0.04%/ (0 - 50 ) on +5V output
TEMP. COEFFICIENT 0.04%/ (0 - 50 ) on +5V output VIBRATION VIBRATION
VIBRATION 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 - 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDSUL60950-1,TUV EN60950-1approved SAFETY STANDARDSUL60950-1,TUV EN60950-1approved
SAFETY STANDARDSUL60950-1,TUV EN60950-1approved SAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 4) (Note 4)
(Note 4)OTHERS OTHERS
OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024, light industry level,criteria A 277.2K hrs min.MIL-HDBK-217F (25 ) 277.2K hrs min.MIL-HDBK-217F (25 )
277.2K hrs min.MIL-HDBK-217F (25 ) 127*76*42mm (L*W*H) 127*76*42mm (L*W*H)
127*76*42mm (L*W*H) 0.25Kg; 54pcs/15.9Kg/1.35CUFT 0.25Kg; 54pcs/15.9Kg/1.35CUFT
0.25Kg; 54pcs/15.9Kg/1.35CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedloadand 25 of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedloadand 25 of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedloadand 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The powersupply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable on http://www.meanwell.com) EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable on http://www.meanwell.com)
EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component powersupplies." (asavailable on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 5. Mounting holes M1 and M2 should be grounded for EMI purposes.
5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. HeatSink HS1,HS2 can not be shorted. 6. HeatSink HS1,HS2 can not be shorted.
6. HeatSink HS1,HS2 can not be shorted. File Name:PT-65-SPEC 2011-09-30 File Name:PT-65-SPEC 2011-09-30
File Name:PT-65-SPEC 2011-09-30

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 5, V2: 12, A2: 4, V3: 24, A3: - MEANWELL - PT-65D English471 Kbytespdf-Eingang: 90-264 AC / 127-370 DC, Ausgabe: 3, V1: 5, A1: 5, V2: 12, A2: 4, V3: 24, A3: - MEANWELL - PT-65D

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder