Sign in
PHOENIX CONTACT PT 2-PE/S-120AC/FM 2856812 PHOENIX CONTACT Type 3 surge protection device
PHOENIX CONTACT PT 2-PE/S-120AC/FM 2856812 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

PT 2-PE/S-120AC/FM 2856812 PHOENIX CONTACT Type 3 surge protection device

Reference: PT 2-PE/S-120AC/FM

Code: 2856812

Manufacturer: PHOENIX CONTACT

Description:

Type 3 surge protection device
Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.

Categories:

  • PHOENIX CONTACT

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Go to successor article:PLT-SEC-T3-120-FM-UT2907918

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Technical data
Product properties
Product typeDevice protection
TypeDIN rail module, two-section, divisible
Surge protection fault messageOptical, remote indicator contact
Insulation characteristics
Overvoltage categoryIII
Pollution degree2
Arrester can be tested with CHECKMASTER from software version:From SW rev. 1.00
IEC test classificationIII
EN typeT3
Electrical properties
Indicator/remote signaling
Connection nameRemote fault indicator contact
Switching functionN/C contact
Maximum operating voltage Umax.AC250 V
Maximum operating voltage UmaxDC50 V
Max. operating current Imax3 A AC
Connection data
Connection methodScrew connection
Screw threadM3
Tightening torque, min0.8 Nm
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.4 mm²
Dimensions
Dimensional drawingpcpjkmlape.jpg
Width17.7 mm
Height90 mm
Depth65.5 mm
Horizontal pitch1 Div.
Complete module width17.7 mm
Complete module height90 mm
Complete module depth65.5 mm
Material specifications
Flammability rating according to UL 94V0
Housing materialPA
Protective circuit
Direction of action1L-N & N-PE
Nominal frequency fN50 Hz
60 Hz
Maximum continuous voltage UC150 V AC
Rated load current IL26 A (30 °C)
Residual current IPE≤ 1.5 µA
Standby power consumption PC≤ 200 mVA
Operating effective current ICat UC≤ 1.1 mA
Nominal discharge current In(8/20) µs2.5 kA
3 kA (in acc. with UL 1449)
Voltage protection level Up(L-N)≤ 620 V
Voltage protection level Up(L-PE)≤ 850 V
Voltage protection level Up(N-PE)≤ 850 V
Response time tA(L-N)≤ 25 ns
Response time tA(L-PE)≤ 100 ns
Max. required back-up fuse25 A (gL/C)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 85 °C
Standards and regulations
Air clearances and creepage distances
Standards/regulationsDIN VDE 0110-1 / IEC 60664-1 / DIN VDE 0675-6 / IEC 61643-1
Standards
Standards/regulationsIEC 61643-1
EN 61643-11/A11
NF C61-740
IEC 61643-1
EN 61643-11/A11
UL 1449
NF C61-740
Standards/specificationsIEC 61643-1
Note2005
Standards/specificationsEN 61643-11/A11
Note2007
Standards/specificationsUL 1449
Standards/specificationsNF C61-740
Mounting
Mounting typeDIN rail: 35 mm

DATASHEET - PDF

Title
Size
Type
Datasheet 1: 2856812 - PT 2-PE/S-120AC/FM
182 Kbytes
Complete catalogue 1: 2856812 - PT 2-PE/S-120AC/FM
12 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.