Sign in
PHOENIX CONTACT I/OFL SWITCH SFN 7TX/FX ST 2891110 PHOENIX CONTACT Industrial Ethernet Switch
PHOENIX CONTACT FL SWITCH SFN 7TX/FX ST 2891110 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

FL SWITCH SFN 7TX/FX ST 2891110 PHOENIX CONTACT Industrial Ethernet Switch

Reference: FL SWITCH SFN 7TX/FX ST

Code: 2891110

Manufacturer: PHOENIX CONTACT

Description:

Industrial Ethernet Switch
Ethernet switch, 7 TP-RJ45 ports, 1 fiber optic port, 100 Mbits/s duplex in ST-D format, automatic detection of 10 or 100 Mbits/s data rate (RJ45), autocrossing function
Ethernet Switch, 7 TP RJ45 ports, 1 FO port, 100 Mbps full duplex in ST-D format, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Go to successor article:FL SWITCH 1005N-2SFX1085176

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Technical data
Dimensions
Width50 mm
Height120 mm
Depth70 mm
Material specifications
Housing materialAluminum
Mounting
Mounting typeDIN rail mounting
Interfaces
Ethernet (RJ45)
Connection methodRJ45
Note on the connection methodAuto negotiation and autocrossing
Transmission speed10/100 Mbps
Transmission physicsEthernet in RJ45 twisted pair
Transmission length100 m (per segment)
Signal LEDsData receive, link status
No. of channels7 (RJ45 ports)
Fiber optic interface
Connection methodST
Transmission speed100 Mbps (full duplex)
Transmission physicsmulti-mode fiberglass
Transmission length2000 m (Fiberglass 50/125)
2000 m (Fiberglass 62.5/125)
Wavelength1300 nm
No. of channels1 (ST multi-mode)
Product properties
Product typeSwitch
Product familyUnmanaged Switch SFN
TypeBlock design
MTTF67.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Insulation characteristics
Protection classIII (IEC 61140, EN 61140, VDE 0140-1)
Switch functions
Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Status and diagnostic indicatorsLEDs: US, link and activity per port
Additional functionsAutonegotiation
Security functions
Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Electrical properties
Local diagnosticsUS Supply voltage Green LED
LNK/ACT Link status/data transmission Green LED
100 Data transmission speed Yellow LED
Maximum power dissipation for nominal condition4.56 W
Test section500 V DC 1 min.
Transmission mediumCopper
FO
Supply
Supply voltage (DC)24 V DC
Supply voltage range9 V DC ... 32 V DC
Power supply connectionVia COMBICON, max. conductor cross section 2.5 mm²
Residual ripple3.6 VPP(within the permitted voltage range)
Typical current consumption190 mA (at US= 24 V DC)
Connection data
Connection technology
Connection namePower supply
Power supply
Connection methodPluggable COMBICON screw connections
Conductor cross section, rigid0.2 mm² ... 2.5 mm²
Conductor cross section, flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12
Stripping length7 mm
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)0 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)
Vibration (operation)in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)86 kPa ... 108 kPa (up to 1500 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3500 m above sea level)
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37Sulfur dioxide (SO2) 10 ±0.3 cm3/m3, hydrogen sulfide (H2S) 1 ±0.3 cm3/m3, at 25°C and 75% humidity and exposure of four days
Standards and regulations
Free from substances that could impair the application of coatingIn acc. with VW specification
EMC data
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Conformance with EMC directivesIEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
IEC 61000-4-3 (immunity to radiated interference) Criterion A
IEC 61000-4-4 (burst) Criterion B
IEC 61000-4-5 (surge) Criterion B
IEC 61000-4-6 (immunity to conducted interference) Criterion A
IEC 61000-4-8 (immunity to magnetic fields) Criterion A
EN 55022 (emitted interference) Criterion A
Noise immunityEN 61000-6-2:2005
Noise emissionEN 61000-6-4
System properties
Functionality
Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Signaling
Status displayLEDs: US, link and activity per port

DATASHEET - PDF

Title
Size
Type
PHOENIX CONTACT-2891110-FL SWITCH SFN 7TX/FX ST
111 Kbytes
PDF CATALOG PHOENIX AUTOMATION EN
35 Mbytes

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.