PHOENIX CONTACT  ELR W1/ 6-24DC 2982090 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

ELR W1/ 6-24DC 2982090 PHOENIX CONTACT Reversing load relay

Reference: ELR W1/ 6-24DC

Code: 2982090

Manufacturer: PHOENIX CONTACT

Description:

Reversing load relay
Electronic reversing load relay for DC motor activation, with light indication and protection circuit, output: 10-30 V DC/6 A with a switching time of 80 ms
Electronic reversing load relay, for controlling DC motors, with LED display and protective circuit, output: 10 - 30 V DC/6 A with a switch-over time of 80 ms

Categories:

  • Relays > Solid state relay
  • PHOENIX CONTACT > INTERFACE Components (IF)

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Technical data

Product properties
Product typeSolid-state contactor
Product familyCONTACTRON
Operating mode100% operating factor
Data management status
Article revision08
Insulation characteristics: Air clearances and creepage distances between the power circuits
InsulationBasic insulation
Overvoltage categoryIII
Pollution degree2

Electrical properties
Number of phases1
Test voltage (Input/output)2.5 kVrms(50 Hz, 60 s)
Supply
Input nameDevice supply
Rated control circuit supply voltage US24 V DC
Control supply voltage range10 V DC ... 30 V DC
Rated control supply current IS7 mA
Protective circuitSurge protection

Input data
Control
Input nameControl input right/left
Current consumption3 mA
Rated actuating voltage UC24 V DC
Triggering voltage range19.2 V DC ... 28.8 V DC
Rated actuating current IC3 mA
Typical response time200 µs
Protective circuitReverse polarity protection
Surge protection
Surge voltage protection> 33 V DC
Switchover time RL/LL(turn-on time)80 ms

Output data
DC output
Rated operating voltage Ue24 V DC
Operating voltage range10 V DC ... 30 V DC
Rated operating current (Load output)6 A
Load current6 A (see to derating)
Quiescent currentapprox. 7 mA (When switched off)
Protective circuitReverse polarity protection
Surge protection
Surge voltage protection> 33 V DC
Current limitation at short-circuits20 A

Connection data
Control circuits
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Load circuit
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.

Signaling
Status displayLED (yellow)
Operating voltage displayGreen LED

Dimensions
Width12.5 mm
Height99 mm
Depth114.5 mm

Material specifications
Colorgray (RAL 7042)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 80 °C

Approvals
UKCA
CertificateUKCA-compliant
UL approval
CertificateNLDX.E228652

Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsEN 50178

Mounting
Mounting typeDIN rail mounting
Assembly notealignable, for spacing see derating
Mounting positionvertical (horizontal DIN rail, motor output below)

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.