PHOENIX CONTACT  FLM DI 8 M12 2736288 - Image 1

Images are for illustrative purposes only. Please refer to data sheet for details.

FLM DI 8 M12 2736288 PHOENIX CONTACT Distributed I/O device

Reference: FLM DI 8 M12

Code: 2736288

Manufacturer: PHOENIX CONTACT

Description:

Distributed I/O device
The local bus equipment has digital inputs. Functions: 8 digital inputs, filter time 3 ms, switchable 500 KBd / 2 MBd, accurate diagnostics per channel, protection against short circuits and overload, rated current of 600 mA, M12 quick connection technology

Categories:

  • PHOENIX CONTACT > I/O

Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX CONTACT

  • More Info
  • PDF
  • Reviews
Guarantee, repair and return.

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

LAST VIEWED

MORE INFO

Key Commercial Data

Orderkey2736288
Packing unit1 pc
Catalog pagePage 212 (C-6-2017)
GTIN4017918951054
Weight per Piece (excluding packing)290.000 g
Custom tariff number85176200
Country of originDE (Germany)

Note

Utilization restriction1

Dimensions

Dimensional drawing
Width70 mm
Height178.5 mm
Depth50 mm
Drill hole spacing168 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 60 °C
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (storage/transport)95 %
Air pressure (operation)80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protectionIP65/IP67

General

Mounting typeWall mounting
Net weight290 g

Interfaces

DesignationFieldline local bus
Connection methodM12 connector, B-coded
Designation connection pointCopper cable
Transmission speed500 kbps / 2 Mbps (can be switched)
Number of positions5

Power supply for module electronics

Connection methodM12 connector
DesignationUL
Supply voltage24 V DC
Supply voltage range18 V DC ... 30 V DC (including ripple)

Fieldline potentials

Voltage supply UL24 V DC
Power supply at ULmax. 4 A
Current consumption from ULmax. 50 mA (At 2 Mbaud)
typ. 40 mA (At 2 Mbaud)
max. 50 mA (At 500 kBaud)
typ. 35 mA (At 500 kBaud)
Voltage supply US24 V DC
Power supply at USmax. 4 A
Current consumption from UStyp. 5 mA (plus power supply for sensors)
max. 600 mA

Digital inputs

Input nameDigital inputs
Description of the inputIEC 61131-2 type 1
Connection methodM12 connector
Connection technology2, 3, 4-wire
Number of inputs8
Filter time3 ms
Input voltage24 V DC
Input voltage range "0" signal-30 V DC ... 5 V DC
Input voltage range "1" signal13 V DC ... 30 V DC
Delay at signal change from 0 to 13.1 ms
Delay at signal change from 1 to 04.1 ms

Electrical isolation

Test sectionTo I/O 500 V AC

Standards and Regulations

Mechanical testsShock in acc. with EN 60068-2-27/IEC 60068-2-27 Load 30g, half sine wave, positive and negative per direction
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g in each space direction
Connection in acc. with standardCUL
Protection classIII, IEC 61140, EN 61140, VDE 0140-1

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications

DATASHEET - PDF

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.