> EATON - MOELLER>Автоматические выключатели в литом корпусе NZM >NZM2/3-XHIV-PI 189748 ELECTRIC НЗМ2/3-ХИВ-ПИ
Предыдущий товар Следующий продукт
NZM2/3-XHIV-PI 189748 EATON ELECTRIC НЗМ2/3-ХИВ-ПИ Увеличить
Изображения носят исключительно иллюстративный. Пожалуйста, ознакомьтесь с техническим паспортом.

NZM2/3-XHIV-PI 189748 EATON ELECTRIC НЗМ2/3-ХИВ-ПИ

NZM2/3-XHIV-PI

189748

Y7-189748

EATON-MOELLER

НЗМ2/3-ХИВ-ПИ

Early-make auxiliary contact for NZM2/3, 1NO, Push-in terminals

Подробнее


Автоматические выключатели в литом корпусе NZM

* Новый продукт в оригинальной упаковке со всеми гарантиями и сертификатами EATON-MOELLER

Общая стоимость: $52.16
Цена за единицу: $52.16

Кол-во цена
1+$52.16
2+$46.71
3+$42.93
4+$40.79
5+$39.99
*Эта цена за единицу и является чистая стоимость (не включая налоги, если это применимо).

Если наша цена не самая лучшая, попросите нас о цене бюджетный запрос

Best sellers

▲

Описание

▲


Early-make auxiliary contact for NZM2/3, 1NO, Push-in terminals
Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: Early-make auxiliary contact with push-in terminals. For interlocking and load shedding circuits, as well as for early make of the undervoltage release in main switch/emergency off applications. Not in conjunction with undervoltage release NZM…-XU…, shunt release NZM…-XA…, relais modules NZM…-X2A… or remote operator NZM…-XR… Early make (manual operation): approx. 20 ms (NZM2/3) and 90 ms (NZM4).

General specifications
Product name
Eaton Moeller series NZM auxiliary contact
Part no.
NZM2/3-XHIV-PI
EAN
4015081877430
Product Length/Depth
115 millimetre
Product height
65 millimetre
Product width
75 millimetre
Product weight
0.06 kilogram
Compliances
RoHS conform
Product Tradename
NZM
Product Type
Accessories
Product Sub Type
Auxiliary contact
Technical Data - Electrical
Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V
4 A
Technical Data - Mechanical
Mounting Method
Other
Number of contacts (change-over contacts)
0
Number of contacts (normally closed contacts)
0
Number of contacts (normally open contacts)
1
Connection type
Spring clamp
Lamp holder
None
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Additional information
Model
Integrable

Technical data ETIM 8.0

Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block ([email protected] [AKN342013])
Number of contacts as change-over contact
0
Number of contacts as normally open contact
1
Number of contacts as normally closed contact
0
Number of fault-signal switches
Rated operation current Ie at AC-15, 230 V
4 A
Type of electric connection
Screw connection
Model
Integrable
Mounting method
Other
Lamp holder
None

Datasheet - PDF

▲
Заглавие: Размер: Тип:
PDF CATALOGUE EATON EN.pdf 51 Mbytes
NZM2/3-XHIV-PI Y7-189748 189748 RU_189748.pdf 108 Kbytes NZM2/3-XHIV-PI Y7-189748 189748 RU_189748.pdf

Отзывы: (0) ▲

Там нет Отзывы о товаре пока нет.

Добавить отзыв
Добавить отзыв
скрыть форму
Рейтинг:
Имя:
Эл. адрес:
Предмет:
Текст:
Вы рекомендуете этот продукт купить?
  Captcha
  Добавить отзыв

Последние отзывы клиентов.

Все оценки, которые мы получаем о артикулах, которые мы предлагаем, являются реальными и проверенными. Маленький жест, но очень ценный. Вот почему мы благодарим Вас за ту минуту, которую Вы инвестируете в то, чтобы оставить нам свое мнение о продуктах, это помогает нам продолжать совершенствоваться и предлагать Вам услугу еще более высокого качества.