> >>M22-L-Y-LED-BVP 110929 ELECTRIC Световой индикатор, Законченное устройство
Предыдущий товар Следующий продукт
M22-L-Y-LED-BVP 110929 EATON ELECTRIC Световой индикатор, Законченное устройство Увеличить
Изображения носят исключительно иллюстративный. Пожалуйста, ознакомьтесь с техническим паспортом.

M22-L-Y-LED-BVP 110929 EATON ELECTRIC Световой индикатор, Законченное устройство

M22-L-Y-LED-BVP

110929

EATON-MOELLER

Световой индикатор, Законченное устройство

M22-L-Y-LED-BVP

Indicator lights, complete device

Подробнее


Низковольтное оборудование > Передняя часть (головка) индикаторной лампы

Средства управления и сигнализации

* Новый продукт в оригинальной упаковке со всеми гарантиями и сертификатами EATON-MOELLER

Общая стоимость: $14.28
Цена за единицу: $14.28

*Эта цена за единицу и является чистая стоимость (не включая налоги, если это применимо).

Если наша цена не самая лучшая, попросите нас о цене бюджетный запрос

обычно покупают вместе

▲

Описание

▲


Indicator lights, complete device
Indicator light, Product range: RMQ-Titan, Description: Blister pack for hanging., Complete practical solution., Can be ordered using a single article no., Connection to SmartWire-DT: no

General specifications
Product name
Eaton Moeller® series M22 Indicator light
Part no.
M22-L-Y-LED-BVP
EAN
4015081104581
Product Length/Depth
50 millimetre
Product height
80 millimetre
Product width
50 millimetre
Product weight
0.022 kilogram
Compliances
CE
Product Tradename
M22
Product Type
Indicator light
Product Sub Type
None
Catalog Notes
Blister pack for hanging.
Can be ordered using a single article no.
Features & Functions
Bezel color
Chrome
Bezel material
Other
Fitted with:
Front ring
Lens color
Yellow
General information
Degree of protection
NEMA 4X, 13
Degree of protection (front side)
IP67/IP69K
Opening diameter
22.5 mm
Product category
RMQ-Titan
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
70 °C
Communication
Connection to SmartWire-DT
No
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
0.45 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 8.0

Low-voltage industrial components (EG000017) / Front element for indicator light (EC000223)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for warning lights ([email protected] [AKF029014])
Suitable for number of built-in signal lights
1
Colour lens
Yellow
Construction type lens
Round
Hole diameter
22.5 mm
Width opening
0 mm
Height opening
22.5 mm
With front ring
Yes
Material front ring
Other
Colour front ring
Chrome
Type of lens
Flat
Degree of protection (IP), front side
IP67/IP69K
Degree of protection (NEMA)
4X, 13

Datasheet - PDF

▲
Заглавие: Размер: Тип:
PDF EATON COMMAND INDICATION EN.pdf 23 Mbytes
M22-L-Y-LED-BVP 110929 RU_110929.pdf 110 Kbytes M22-L-Y-LED-BVP 110929 RU_110929.pdf

Отзывы: (0) ▲

Там нет Отзывы о товаре пока нет.

Добавить отзыв
Добавить отзыв
скрыть форму
Рейтинг:
Имя:
Эл. адрес:
Предмет:
Текст:
Вы рекомендуете этот продукт купить?
  Captcha
  Добавить отзыв

Последние отзывы клиентов.

Все оценки, которые мы получаем о артикулах, которые мы предлагаем, являются реальными и проверенными. Маленький жест, но очень ценный. Вот почему мы благодарим Вас за ту минуту, которую Вы инвестируете в то, чтобы оставить нам свое мнение о продуктах, это помогает нам продолжать совершенствоваться и предлагать Вам услугу еще более высокого качества.