Увеличить Изображения носят исключительно иллюстративный. Пожалуйста, ознакомьтесь с техническим паспортом.

DG1-35100FB-C21C 9703-5006-00P EATON ELECTRIC Преобразователь частоты, 500 В перем. тока, трехфазн., 100 A, ..

Артикул DG1-35100FB-C21C

код: 9703500600P

производитель: EATON-MOELLER

Описание:

Преобразователь частоты, 500 В перем. тока, трехфазн., 100 A, 55 кВт, IP21/NEMA1, Тормозной прерыватель, Дроссель промежуточного контура

ДГ1-35100ФБ-К21С

Variable frequency drive, 500 V AC, 3-phase, 100 A, 55 kW, IP21/NEMA1, Brake chopper, DC link choke

Подробнее

категории:

Преобразователи частоты Power XL

* Новый продукт в оригинальной упаковке со всеми гарантиями и сертификатами EATON-MOELLER

Гарантия, ремонт и возврат.

* Эта статья ограничен. Пожалуйста, запросите для нас, чтобы проверить, есть ли в наличии единицы или предложить альтернативный продукт.

Если наша цена не самая лучшая, попросите нас о цене бюджетный запрос

ПРОСМОТРЕННЫЕ ТОВАРЫ

DG1-35100FB-C21C...

Преобразователь частоты, 500 В перем....

Best sellers

▲

Описание

▲

Variable frequency drive, 500 V AC, 3-phase, 100 A, 55 kW, IP21/NEMA1, Brake chopper, DC link choke

Variable frequency drive, Part group reference (e.g. DIL): DG1, Rated operational voltage: Ue = 600 V AC, 3-phase, Output voltage with Ve: U2 = 600 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 500 (-10%) - 600 (+10%) V, Rated operational current At 150% overload: Ie = 100 A, Note: Rated operational current for a switching frequency of 1 - 6 kHz and an ambient temperature of +50 °C for a 150% overload and +40 °C for a 110% overload, Rated operational current At 110% overload: Ie = 125 A, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole , three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 525 V, 50 Hz, Assigned motor rating 150 % Overload: P = 55 kW, 110 % Overload: P = 75 kW, 150 % Overload: IM = 79 A, 110 % Overload: IM = 107 A, Assigned motor rating Note: at 600 V, 50 Hz, Assigned motor rating 150 % Overload: P = 75 kW, 110 % Overload: P = 90 kW, 150 % Overload: IM = 93.2 A, 110 % Overload: IM = 112 A, Assigned motor rating Note: at 600 V, 60 Hz, Assigned motor rating 150 % Overload: P = 100 HP, 110 % Overload: P = 125 HP, Assigned motor rating 150 % Overload: IM = 99 A, 110 % Overload: IM = 99 A , Degree of Protection: IP21/NEMA1, Interface/field bus (built-in): Modbus RTU, Modbus TCP, BACnet MS/TP, Ethernet IP, Fieldbus connection (optional): PROFIBUS, CANopen®, DeviceNet, SmartWire-DT, Fitted with: Radio interference suppression filter, Additional PCB protection, Multi-line graphic display, Brake chopper, DC link choke, Frame size: FS5, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5

General specifications

Product name

Eaton DG1 variable frequency drive

Part no.

DG1-35100FB-C21C

EAN

4015081772230

Product Length/Depth

340.7 millimetre

Product height

888.5 millimetre

Product width

288 millimetre

Product weight

76.2 kilogram

Certifications

CSA-C22.2 No. 274-13
UL Category Control No.: NMMS, NMMS7
UL
UL report applies to both US and Canada
RoHS, ISO 9001
C-Tick
IEC/EN61800-3
UL508
UkrSEPRO
UL File No.: E134360
IEC/EN 61800-3
EAC
Specification for general requirements: IEC/EN 61800-2
Certified by UL for use in Canada
IEC/EN61800-5
CE
CUL
Safety requirements: IEC/EN 61800-5

Product Tradename

DG1

Product Type

Variable frequency drive

Product Sub Type

None

Catalog Notes

The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

Features & Functions

Features

Externally accessible fan
Parameterization: Fieldbus
Parameterization: Keypad
Parameterization: Power Xpert inControl

Functions

4-quadrant operation possible

General information

Air volume capacity

395 m³/h

Cable length

C3 ≤ 10 m, Radio interference level, maximum motor cable length
200 m, screened, maximum permissible, Motor feeder

Degree of protection

NEMA 1
IP21

Electromagnetic compatibility

1st and 2nd environments (according to EN 61800-3)

Environmental class

3C2, 3S2 (Air quality)

Fitted with:

Control unit
Brake chopper
Multi-line graphic display
DC link choke
Additional PCB protection
Breaking resistance
PC connection
Radio interference suppression filter
Internal DC link
IGBT inverter

Frame size

FS5

Mounting position

Vertical

Number of slots

2 (expansion)

Overvoltage category

III

Pollution degree

Product Category

Variable frequency drives

Protection

Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)

Radio interference class

Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments
C1: with external filter, for conducted emissions only
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.

Safety function/level

STO (Safe Torque Off, SIL1, PLc Cat 1)

Shock resistance

UPS drop test (for weights inside the UPS frame)
Storage and transportation: maximum 15 g, 11 ms (inside the packaging)
Mechanical, According to EN 61800-5-1, IEC/EN 60068-2-27

Suitable for

Branch circuits, (UL/CSA)

Vibration

Resistance: 5 - 150 Hz, According to EN 61800-5-1, IEC/EN 60068-2-6
Resistance: 15.8 – 150 Hz, 1 g, Maximum acceleration amplitude
Resistance: 5 - 15.8 Hz, Amplitude 1 mm (peak)

Climatic environmental conditions

Altitude

Above 1000 m with 1 % derating per 100 m
Max. 2000 m
Max. 1000 m

Ambient operating temperature - min

-10 °C

Ambient operating temperature - max

50 °C

Ambient operating temperature at 150% overload - min

-30 °C

Ambient operating temperature at 150% overload - max

50 °C

Ambient storage temperature - min

-40 °C

Ambient storage temperature - max

70 °C

Climatic proofing

< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Current limitation

0.1 - 2 x IH (CT), motor, main circuit

Efficiency

98.6 % (η)

Heat dissipation at current/speed

1013 W at 100% current and 0% speed
1223 W at 50% current and 0% speed
1357 W at 100% current and 90% speed
440 W at 25% current and 0% speed
512 W at 25% current and 50% speed
578 W at 100% current and 50% speed
699 W at 50% current and 50% speed
749 W at 50% current and 90% speed

Input current ILN at 110% overload

114.1 A

Input current ILN at 150% overload

93 A

Leakage current at ground IPE - max

11.2 mA

Mains current distortion

28.4 %

Mains switch-on frequency

Maximum of one time every 60 seconds

Mains voltage - min

525 V

Mains voltage - max

600 V

Operating mode

Speed control with slip compensation
Torque regulation
U/f control
Sensorless vector control (SLV)

Output frequency - min

0 Hz

Output frequency - max

400 Hz

Output voltage (U2)

600 V AC, 3-phase

Overload current IL at 110% overload

137.5 A

Overload current IL at 150% overload

150 A

Rated conditional short-circuit current (Iq)

100 kA

Rated control supply voltage

10 V DC (Us, max. 10 mA)

Rated frequency - min

45 Hz

Rated frequency - max

66 Hz

Rated operational current (Ie) at 110% overload

125 A

Rated operational current (Ie) at 150% overload

100 A

Rated operational voltage

600 V AC, 3-phase

Resolution

0.01 Hz (Frequency resolution, setpoint value)

Short-circuit protection rating

175 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring

Starting current - max

200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section

Supply frequency

50/60 Hz

Switching frequency

1.5 kHz, 1 - 6 kHz adjustable, fPWM, Power section, Main circuit

System configuration type

TN-S, TN-C, TN-C-S, TT, IT

Voltage rating - max

600

Motor rating

Assigned motor current IM at 525 V, 50 Hz, 110% overload

107 A

Assigned motor current IM at 525 V, 50 Hz, 150% overload

79 A

Assigned motor current IM at 600 V, 50 Hz, 110% overload

112 A

Assigned motor current IM at 600 V, 50 Hz, 150% overload

93.2 A

Apparent power

Apparent power at 600 V

129.9 kV·A

Braking function

Braking resistance

7 O

Braking torque

Adjustable to 150 % (I/Ie), DC - Main circuit
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Max. 30 % MN, Standard - Main circuit
Adjustable to 150 %, DC - Main circuit

Switch-on threshold for the braking transistor

1050

Control circuit

Number of inputs (analog)

Number of inputs (digital)

Number of outputs (analog)

Number of outputs (digital)

Number of relay outputs

3 (parameterizable, 2 changeover contacts and 1 N/O, 6 A (240 V AC) / 6 A (24 V DC))

Rated control voltage (Uc)

24 V DC (external, max. 250 mA options incl.)

Communication

Communication interface

DeviceNet, optional
SmartWire-DT, optional
Modbus TCP, built in
Ethernet IP, built in
Modbus RTU, built in
CANopen®, optional
BACnet MS/TP, built in
PROFIBUS, optional

Connection to SmartWire-DT

Yes
In conjunction with DXG-NET-SWD SmartWire DT module

Protocol

TCP/IP
MODBUS
CAN
PROFIBUS
PROFINET IO
DeviceNet
Other bus systems
BACnet
EtherNet/IP

Design verification

Equipment heat dissipation, current-dependent Pvid

1390 W

Heat dissipation capacity Pdiss

0 W

Heat dissipation per pole, current-dependent Pvid

0 W

Rated operational current for specified heat dissipation (In)

100 A

Static heat dissipation, non-current-dependent Pvs

27.23 W

Heat dissipation details

Operation (with 150 % overload), allow for derating

10.2.2 Corrosion resistance