A22S-C3A A22S2015M A22SC3A OMRON Testa selettore a 3 pos automatico sinistra nero

Knob-type Selector Switch
A22S/W
Install in 22-dia. or 25-dia. Panel Cutout
• Easy mounting and removal of Switch Unit.
• Increase wiring efficiency with three-row mounting of Switch
Blocks.
• Finger protection mechanism on Switch Unit provided as a stan- dard feature.
• Use 25-dia. ring to install in 25-dia. panel cutouts.
• Mounted using either open-type (fork-type) or closed-type
(round-type) crimp terminals.
• IP65 oil resistance (non-lighted models) IP65 (lighted models)
• EN60947-5-1
• UL and cUL approved (File No. E41515).
Model Number Structure
■ Model Number Legend
Completely Assembled
Shipped as a set which includes the Selector, Lamp (lighted models only), and Switch.
1 2 3 4 5
A22@-@@-@-@
1 Lighted/Non-lighted
Code Description
S Non-lighted
W Lighted
2 Number of Notches/Reset Method
Code Description
2M 2 notches/Manual
2A 2 notches/Automatic
3M 3 notches/Manual
3A 3 notches/Automatic
3 Illumination Color
Code Description
None Black (for non-lighted models only) R Red
G Green Y Yellow A Blue
4 Light Source
5 Contacts
Code Description
10 SPST-NO (See note 1.)
01 SPST-NC (See note 1.)
11 SPST-NO + SPST-NC
20 DPST-NO
02 DPST-NC
Note: 1. For models with 2 notches
2. The contacts are rated for stand- ard loads. For microloads, refer to Accessories section for the A22.
Without Voltage Reduction Unit
Code Operating Voltage
None Non-lighted
With Voltage Reduction Unit
None Non-lighted
T1 LED 110 VAC (See note 2.)
6D LED
6 VDC T2
220 VAC (See note 3.)
6A 6 VAC
12A 12 VAC/VDC
24A 24 VAC/VDC
Note: 1. The LED lamp (24 VAC/VDC) can be lit by directly applying 110 VAC/VDC (220 VAC/VDC) to the lamp terminal. LED incorporates the 24-VAC/VDC models.
5 Incandescent
12 lamp
5 VAC/VDC
12 VAC/VDC
2. Operational voltage: 95 to 115 VAC
3. Operational voltage: 190 to 230 VAC
24 24 VAC/VDC
Knob-type Selector Switch A22S/W G-115