Componente logico per sistema bus

ABL/S 2.1

2CDG110073R0011

-

ABL / S2.1 Unità Application Logic

UNITÀ LOGICA FUNC. LOGICA

Allows the devlopment of complex logical functions by simply combining different logic elements and gates using a graphical user interface as an ETS plug-in from ETS3. No additional software is required. There are 50 logical elements (AND, OR, 1ofN), 50 uni- and bidirectional gates, 30 timer modules (On- /Off delay, impuls duration, and stairway light controller), 10 comparators, 200 worksheets, 250 Marker and 254 In- and Outputs are available. No additional power supply required, the device is powered from KNX bus.

BDB/S 1.1

2CDG110067R0011

-

BDB / S Unità di registrazione 1.1 Dati

MODULO DI VALUTAZIONE DEI DATI

It detects local operation cycles and operating hours to plan the maintenance or durability evaluation of the devices. For each of the 35 channels to be monitored, limit values can be set and a message sent if this limit is exceeded. The logging of operating hours can be predetermined for the total or remaining time. These values can be modified via communication objects. No additional power supply required, the device is powered from KNX bus.

LM/S 1.1

GHQ6310080R0111

-

LM / S1.1 modulo logico

UNITÀ PER FUNZIONI LOGICHE

Used to solve a varied range of project-specific control tasks and can implement 3 functions simultaneously. The following functions are available for selection: logic gate, filter, time delay, multiplier, min/max value detector, temperature comparator, toggle values, threshold detection, format converter, scenes, increment/decrement values, staircase lighting.

SCM/S 1.1

2CDG110024R0011

-

SCM / Security Module S1.1

MODULO DI SICUREZZA DIN 2 MODU

Codice Ordine: EC 000 6 - Dispone di funzioni logiche che consentono di realizzare un sistema di sicurezza in installazioni KNX di dimensioni medio-piccole in combinazione con altri dispositivi KNX, es. terminali di zona e rilevatori di movimento. Può gestire fino a 64 zone diverse. Si può usare il relè interno per l’allarme.

SMB/S 1.1

GHQ6310085R0111

-

Unità di monitoraggio / S1.1 Fault SMB

MODULO FAULT MONITOR

It is used to detect and manage up to 100 fault messages which are processed within the unit and can be forwarded to a display unit. Furthermore, an optical and an acoustic collective status signal is provided. Messages can be acknowledged and data losses can bereported. The devices support message formats to DIN 19 235: messages with continuous lighting, new value messages with simple flashing light, initial value messages with simple acknowledgement, motor messages. Current values can be centrally scanned.

ABA/S 1.2.1

2CDG110192R0011

-

Controllore a logica, MDRC

Controller logico, MDRC

Codice Ordine: KNXL0008 - Dispositivi generici di ingresso e uscita, ABA/S1.2.1 Modulo logico