53420260 LAPP SKINTOP DIX-M 20260 FKM

Beneficios

• Gentle clamping of the cables due to the high elasticity of the sealing insert material.
• Protection class IP 68 can be achieved, if all holes are used by cables with nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing plugs.
• Variety of versions available, depending on the number and diameter of cables. Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI).
• Easy insertion of several cables through one cable gland.
• Multiple cable insertion enables higher packing density.

Ámbito de uso

• For use with metric SKINTOP®/SKINTOP® CLICK cable glands.
• To be used instead of the standard sealing insert in the SKINTOP® cable gland.
• Apto para el uso en exteriores
• The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant. They are extremely heat-resistant and suitable for use with extreme high temperatures (up to +200 °C).
• The silicone variants are resistant to ECOLAB® cleaning agents and disinfectants and are chemically resistant in many cases. They conform to FDA 21 CFR 177.2600 and are therefore permitted for food and beverage industry. With their blue colour, they can easily distinguish from food. In addition, they are extremely flexible at low temperatures and suitable for use at extreme minus temperatures (down to -50 °C).

Aviso

• IP 68: se consige cuando todas la aberturas están cerradas y todos los orificios están ocupados de manera óptima; p. ej. cuando se usan cables con diámetro nominal y/o tapones de sellado SKINTOP® DIX-DV

Clasificación ETIM 5

• ETIM 5.0 Class-ID: EC000032
• Descripción de clase ETIM 5.0: tapón para prensaestopas

Clasificación ETIM 6

• ETIM 6.0 Class-ID: EC000032
• ETIM 6.0 Class-Description: tornillo de cierre

Bajo demanda

• Formas especiales

Colores disponibles

• RAL 9005 negro
• Azul, RAL 5017

Material

• NBR, FKM, silicona

Grado de protección:

• IP 54
• IP 68 (at maximum use of all boreholes)

Rango de temperaturas

• NBR: de -40 °C a +100 °C
  FKM: de -20 °C a +200 °C
  Silicona: de -50 °C a +200 °C