OICP355220 nVent HOFFMAN HMI, 354x525x200, sin MP, aluminio, IP55

Material:

Estructura: Al Mg Si05. Placa trasera: Al Mg. Esquineros: AlSI 12.

Protección:

IP 65.

Acabado:

Estructura y placa trasera: aluminio anodizado, y esquineros: RAL 7016.

Instrucciones de montaje:

El panel frontal OIFP no está incluido en el suministro estándar y se pide por separado.

Suministro:

Estructura, placa trasera atornillada, kit de montaje de placa frontal y material de montaje.

Feature:

Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, removable aluminium front plate accessory and a IP 65 protection degree.

Advantage:

Components can be installed easily because of the removable front panel (supplied as an accessory) and accessible because of the removable rear panel. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.

Benefit:

The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation.

Comment:

The aluminium front plate (OIFP), must be ordered separately.