5/5 .
— CHE 6/5/26, 10:33
Producto:MTZ18-4VM DANFOSS REFRIGERATION Compreso...

Las imágenes son sólo a título ilustrativo. Por favor, revise la ficha técnica.
Referencia: EASY-E4-DC-12TC1P
Código: 197506
Número de catálogo: Y7-197506
Fabricante: EATON - MOELLER series
Descripción:
Categorías:
Producto nuevo en su embalaje original con todas las garantías y certificaciones de EATON - MOELLER SERIES
VISTOS ANTERIORMENTE
| Product Name | Eaton Moeller® series EASY Control relay |
| Catalog Number | 197506 |
| EAN | 4015081940844 |
| Product Length/Depth | 58 mm |
| Product Height | 90 mm |
| Product Width | 72 mm |
| Product Weight | 0.2 kg |
| Compliances | Eaton supports the product until its end of life |
| Certifications | IEC 60068-2-6 EN 55022 IEC/EN 61000-4-2 IEC 60068-2-27 EN 55011 IEC/EN 61000-4 UL Listed UL Category Control No.: NRAQ, NRAQ7 IEC/EN 61131-2 IEC 60068-2-30 EN 61010 IEC/EN 61000-6-3 IEC/EN 61000-6-2 EN 50178 UL File No.: E205091 DNV GL CE UL hazardous location group A (acetylene) UL hazardous location group B (hydrogen) UL hazardous location group C (ethylene) UL hazardous location group D (propane) UL hazardous location class I UL hazardous location division 2 |
| Catalog Notes | Accuracy of the real-time clock depending on ambient air temperature - fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible |
| Model Code | EASY-E4-DC-12TC1P |
| Features | Expandable Networkable (Ethernet) Parallel connection of transistor outputs with resistive load, inductive load with external suppressor circuit, combination within a group - Group 1 Q1 to Q4 |
| Fitted with: | Display Timer Keypad Real time clock |
| Functions | Thermal cutout |
| Indication | LCD-display used as Output status indication of Transistor outputs LCD-display used as status indication of Digital inputs 24 V DC |
| Degree of protection | IP20 |
| Display type | Monochrome |
| Duty factor | 100 % (Inductive load to EN 60947-5-1, With external suppressor circuit) 100 % (Inductive load to EN 60947-5-1, Without external suppressor circuit, DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H) 100 % (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 15 ms, R = 48 Ω, L = 0.24 H) |
| Frequency counter | Pulse shape: Square (digital inputs 24 V DC) Cable length: ≤ 20 m (screened, Digital inputs 24 V DC) Counter frequency: 5 kHz (Digital inputs 24 V DC) Number: 4 (I1, I2, I3, I4 - Digital inputs 24 V DC) Pulse pause ratio: 1:1 (Digital inputs 24 V DC) |
| Insulation resistance | According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Mounting method | Top-hat rail fixing (according to IEC/EN 60715, 35 mm) Screw fixing using fixing brackets ZB4-101-GF1 (accessories) Front build in possible Rail mounting possible |
| Mounting method | Top-hat rail fixing (according to IEC/EN 60715, 35 mm) Screw fixing using fixing brackets ZB4-101-GF1 (accessories) Front build in possible Rail mounting possible |
| Operating frequency | Depending on the suppressor circuit (Inductive load to EN 60947-5-1, With external suppressor circuit, Max. switching frequency, max. duty factor) Dependent on the cycle time of the basic device |
| Overvoltage category | III |
| Pollution degree | 2 |
| Product category | Control relays easyE4 |
| Protocol | MODBUS TCP/IP |
| Residual current | 0.1 mA (on signal "1" per channel) |
| Residual ripple | 5 % (transistor outputs) ≤ 5 % |
| Resolution |
|
| Software | EASYSOFT-SWLIC/easySoft |
| Type | easyE4 base device |
| Used with | easyE4 |
| Voltage type | DC |
| Drop and topple | 50 mm Drop height, Drop to IEC/EN 60068-2-31 |
| Height of fall (IEC/EN 60068-2-32) - max | 0.3 m |
| Mounting position | Vertical Horizontal |
| Shock resistance | 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts |
| Vibration resistance | According to IEC/EN 60068-2-6 10 - 57 Hz, 0.15 mm constant amplitude 57 - 150 Hz, 2 g constant acceleration |
| Air pressure | 795 - 1080 hPa (operation) |
| Ambient operating temperature - min | -25 °C |
| Ambient operating temperature - max | 55 °C |
| Ambient storage temperature - min | -40 °C |
| Ambient storage temperature - max | 70 °C |
| Environmental conditions | Condensation: prevent with appropriate measures Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Relative humidity | 5 - 95 % (IEC 60068-2-30, IEC 60068-2-78) |
| Air discharge | 8 kV |
| Burst impulse | 2 kV, Signal cable 2 kV, Supply cable According to IEC/EN 61000-4-4 |
| Contact discharge | 6 kV |
| Electromagnetic fields | 1 V/m at 2 - 2.7 GHz (according to IEC EN 61000-4-3) 10 V/m at 0.08 - 1.0 GHz (according to IEC EN 61000-4-3) 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3) |
| Immunity to line-conducted interference | 10 V (according to IEC/EN 61000-4-6) |
| Radio interference class | Class B (EN 61000-6-3) |
| Surge rating | 0.5 kV, Supply cables, symmetrical, EASY…DC, power pulses (Surge), EMC 1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC According to IEC/EN 61000-4-5 Level 4 |
| Voltage dips | ≤ 10 ms, Bridging voltage dips |
| Terminal capacity | 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule 0.2 - 4 mm² (AWG 22 - 12), solid |
| Conventional thermal current Ith of auxiliary contacts (1-pole, open) | 0.5 A |
| Power consumption | 2 W |
| Power loss | 2 W |
| Rated operational current (Ie) | Max. 0.5 A at signal „1” DC per channel |
| Rated operational voltage | 20.4 - 28.8 V DC 20.4 - 28.8 V DC (Transistor outputs) 24 V DC (-15 %/+ 20 % - power supply) 24 V DC (transistor outputs) 24 V DC (digital inputs) |
| Supply voltage at DC - min | 20.4 VDC |
| Supply voltage at DC - max | 28.8 VDC |
| Short-circuit current | 6.8 A, Transistor outputs |
| Short-circuit protection | ≥ 1A (T), Fuse, Power supply Yes, electronic (Q1 - Q4), Transistor outputs |
| Short-circuit tripping current | 0.7 ≤ Ie ≤ 1.7 per output, For Ra ≤ 10 mΩ, Depending on number of active channels and their load, Transistor outputs |
| Connection type | Ethernet: RJ45 plug, 8-pole Push in terminals |
| Data transfer rate | 10/100 MBit/s |
| Cable length | 30 m, screened, Analog inputs 100 m, unscreened, Digital inputs 12 V DC 100 m, unscreened, Digital inputs 24 V AC |
| Cable type | CAT5 |
| Accuracy | ± 2 s/day, Real-time clock to inputs (± 0.2 h⁄Year) ± 1 %, Repetition accuracy of timing relays (of values) ± 2 %, (I7, I8) ± 0.12 V, of actual value, within a single device (Analog Inputs) ± 3 %, of actual value, two easy devices (Analog Inputs) |
| Conversions | Each CPU cycle, Analog inputs |
| Delay time | 39 ms typ., Digital Inputs 100 - 240 V AC 50 Hz (I1 - I8), Delay time from 1 to 0, Debounce OFF 32 ms typ., Digital Inputs 100 - 240 V AC 60 Hz (I1 - I8), Delay time from 1 to 0, Debounce OFF 80 ms, Digital inputs 115/230 V AC 50 Hz (I7, I8), Delay time from 0 to 1, Debounce ON 0.5 ms typ., Digital Inputs 100 - 240 V DC (I1 - I8), Delay time from 1 to 0, Debounce OFF 39 ms typ., Digital Inputs 100 - 240 V AC 50 Hz (I1 - I8), Delay time from 0 to 1, Debounce OFF 32 ms typ., Digital Inputs 100 - 240 V AC 60 Hz (I1 - I8), Delay time from 0 to 1, Debounce OFF 0.5 ms typ., Digital Inputs 100 - 240 V DC (I1 - I8), Delay time from 0 to 1, Debounce OFF |
| Incremental counter | Pulse shape: Square Signal offset: 90° Counter frequency: ≤ 5 kHz Number of counter inputs: 2 (I1 + I2, I3 + I4) Pulse pause ratio: 1:1 Value range: -2147483648 to +2147483647 |
| Incremental encoder | Cable length: ≤ 20 m (screened) |
| Input | Voltage (DC) |
| Input current | 80 mA |
| Input impedance | 13.3 kΩ |
| Input voltage | Signal 0: ≤ 5 V DC (I1 - I8, Digital inputs, 24 V DC) |
| Number of inputs (analog) | 4 |
| Number of inputs (digital) | 4 8 |
| Number of outputs (analog) | 0 |
| Number of outputs (digital) | 4 |
| Output | Voltage Current 4 Transistor Outputs Parallel connection of max. 2 Transistor outputs |
| Output voltage | Max. 2.5 V (at status 0 per channel, transistor outputs) U = Uₑ - 1 V (signal 1 at Iₑ = 0.5 A, transistor outputs) |
| Rapid counter inputs | 1:1 (Pulse pause ratio) 10 kHz, Counter frequency ≤ 20 m (cable length, screened) -2147483648 - 2147483647 (value range) Square (pulse shape) Number: 4 (I1, I2, I3, I4 - Digital inputs 24 V DC) |
| Signal range | 0 - 10 V DC, Analog inputs |
| Utilization factor | 0.25 (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 15 ms, R = 48 Ω, L = 0.24 H) 1 (Inductive load to EN 60947-5-1, With external suppressor circuit) 0.25 (Inductive load to EN 60947-5-1, Without external suppressor circuit, DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H) |
| Explosion safety category for gas | None |
| Potential isolation | Between Analog inputs and Digital inputs: no Between Transistor outputs: no |
| Protection against polarity reversal | Yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.) |
| Explosion safety category for dust | None |
| Equipment heat dissipation, current-dependent Pvid | 0 W |
| Heat dissipation capacity Pdiss | 0 W |
| Heat dissipation per pole, current-dependent Pvid | 0 W |
| Static heat dissipation, non-current-dependent Pvs | 2 W |
| 10.2.2 Corrosion resistance | Meets the product standard's requirements. |
| 10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. |
| 10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. |
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects | Meets the product standard's requirements. |
| 10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. |
| 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.7 Inscriptions | Meets the product standard's requirements. |
| 10.3 Degree of protection of assemblies | Meets the product standard's requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard's requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. |
| 10.8 Connections for external conductors | Is the panel builder's responsibility. |
| 10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder's responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder's responsibility. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, le agradecemos ese minuto que invierte en dejarnos su opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerle un servicio de todavía mayor calidad.
5/5 .
— CHE 6/5/26, 10:33
Producto:MTZ18-4VM DANFOSS REFRIGERATION Compreso...
5/5 merci beaucoup
— sotitradim 29/11/25, 11:12
Producto:SL20,MNM,IP42,300lm,1H SL2MNM42H1C EATON...
4/5 a,azing to use it
— B rahul 4/10/25, 8:05
Producto:661601 LEGRAND URA21LED 70LM 1H IP42 NP
4/5 Amazing to use it
— B rahul 4/10/25, 8:04
Producto:661601 LEGRAND URA21LED 70LM 1H IP42 NP