EATON - MOELLER series DC1-32046FB-A6SOE1 199428 Y7-199428 - Imagen 1

Las imágenes son sólo a título ilustrativo. Por favor, revise la ficha técnica.

DC1-32046FB-A6SOE1 199428 Y7-199428 EATON ELECTRIC DC1-32046FB-A6SOE1

Referencia: DC1-32046FB-A6SOE1

Código: 199428

Número de catálogo: Y7-199428

Fabricante: EATON - MOELLER series

Descripción:

DC1-32046FB-A6SOE1
Eaton DC1 Variable frequency drive, 230 V AC, 3-phase, 46 A, 11 kW, IP66/NEMA 4X, Radio interference suppression filter, Brake chopper, 7-digital display assembly, Local controls, Additional PCB protection, UV resistant, FS4
Variador de frecuencia, referencia del grupo de piezas (por ejemplo, DIL): DC1, Tensión nominal de funcionamiento: Ue = 230 V CA, 3 fases, 240 V CA, 3 fases, Tensión de salida con Ve: U2 = 230 V CA, 3 fases, 240 V CA, 3 fases, Tensión de red (50/60Hz): LSN = 200 (-10%) - 240 (+10%) V, corriente nominal de funcionamiento Al 150% de sobrecarga: Ie = 46 A, Nota: Corriente nominal de funcionamiento a una frecuencia de funcionamiento de 6 kHz y una temperatura del aire ambiente de +40 °C, Nota: Ciclo de sobrecarga durante 60 s cada 600 s, Capacidad nominal asignada del motor Nota: Para motores asíncronos trifásicos de cuatro polos con ventilación interna y externa normal con 1500 rpm a 50 Hz y 1800 rpm a 60 Hz , Ciclo de sobrecarga de 60 s cada 600 s, a 230 V, 50 Hz, Potencia nominal asignada 150 % Sobrecarga: P = 11 kW, 150 % Sobrecarga: IM = 46 A, Clasificación asignada del motor Nota: a 220 - 240 V, 60 Hz, Potencia nominal asignada 150 % Sobrecarga: P = 15 CV, Potencia nominal asignada 150 % Sobrecarga: IM = 46 A, Grado de protección: IP66/NEMA 4X, Interfaz/bus de campo (incorporado): OP-Bus (RS485)/Modbus RTU, CANopen®, Conexión de bus de campo (opcional): SmartWire-DT, Equipado con: filtro de supresión de interferencias de radio, chopper de freno, conjunto de pantalla digital 7, controles locales, protección PCB adicional, resistente a los rayos UV, tamaño del marco: FS4, Normas: Requisitos generales: IEC/EN 61800-2 , Requisitos EMV: IEC/EN 61800-3, Requisitos de seguridad: IEC/EN 61800-5-1

Categorías:

  • Componentes industriales de baja tensión > Convertidor de frecuencia de menos de 1 kV
  • EATON - MOELLER series > Convertidores de Frecuencia Power XL

Producto nuevo en su embalaje original con todas las garantías y certificaciones de EATON - MOELLER SERIES

  • Más Información
  • ETIM
  • Opiniones
Garantía, reparación y devolución.

Precio unitario: 2.158,34 €

Este precio es por unidad y muestra el valor neto (no incluye impuestos indirectos si son aplicables).

Calcule su precio por cantidad

CantidadPrecio

Plazo estándar: 3 semanas.

  • Estos plazos son una estimación y podrían variar una vez tramitado el pedido del artículo.

VISTOS ANTERIORMENTE

MÁS INFORMACIÓN

Especificaciones generales

Product Name
Eaton DC1 Variable frequency drive
Catalog Number
199428
EAN
4015081978175
Product Length/Depth
275 mm
Product Height
360 mm
Product Width
240 mm
Product Weight
9.5 kg
Certifications
CUL
CSA-C22.2 No. 14
IEC/EN 61800-5-1
UL Category Control No.: NMMS, NMMS7
UL Listed
UL report applies to both US and Canada
UkrSEPRO
CE
Certified by UL for use in Canada
CE marking
UL
IEC/EN61800-5
RoHS, ISO 9001
IEC/EN 61800-2
RCM
UL 508C
UL File No.: E172143
EAC
IEC/EN 61800-3
Catalog Notes
Model Code
DC1-32046FB-A6SOE1

Features & Functions

Features
Parameterization: Keypad
Parameterization: drivesConnect mobile (App)
Parameterization: Fieldbus
Parameterization: drivesConnect
Fitted with:
Radio interference suppression filter
PC connection
IGBT inverter
Control unit
Brake chopper
Local controls
Breaking resistance
Internal DC link
Additional PCB protection
UV resistance
7-digital display assembly
Functions
4-quadrant operation possible

General

Cable length
C2 ≤ 5 m, maximum motor cable length
C3 ≤ 25 m, maximum motor cable length
100 m, screened, maximum permissible cable length
200 m, screened, with motor choke, maximum permissible cable length
300 m, unscreened, with motor choke, maximum permissible, Motor feeder
150 m, unscreened, maximum permissible cable length
Communication interface
OP-Bus (RS485), built in
CANopen®, built in
SmartWire-DT, optional
Modbus RTU, built in
Connection to SmartWire-DT
No
Degree of protection
NEMA 4X
IP66
Electromagnetic compatibility
1st and 2nd environments (according to EN 61800-3)
Frame size
FS4
Mounting position
Vertical
Product category
Variable frequency drives
Product category
Variable frequency drives
Protection
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol
CAN
Other bus systems
MODBUS
EtherNet/IP
Radio interference class
Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Suitable for
Branch circuits, (UL/CSA)

Climatic environmental conditions

Altitude
Above 1000 m with 1 % derating per 100 m
Max. 4000 m
Ambient operating temperature - min
-20 °C
Ambient operating temperature - max
40 °C
Ambient storage temperature - min
-40 °C
Ambient storage temperature - max
60 °C
Climatic proofing
< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Efficiency
97 % (η)
Input current ILN at 150% overload
50.1 A
Leakage current at ground IPE - max
6.9 mA
Mains switch-on frequency
Maximum of one time every 30 seconds
Mains voltage - min
200 V
Mains voltage - max
240 V
Operating mode
Synchronous reluctance motors
PM motors
U/f control
BLDC motors
Sensorless vector control (SLV)
Speed control with slip compensation
Output frequency - min
0 Hz
Output frequency - max
500 Hz
Output voltage (U2)
240 V AC, 3-phase
230 V AC, 3-phase
Overload current IL at 150% overload
69 A
Rated control supply voltage
10 V DC (Us, max. 10 mA)
Rated frequency - min
48 Hz
Rated frequency - max
62 Hz
Rated operational current (Ie)
46 A at 150% overload (at an operating frequency of 6 kHz and an ambient air temperature of +40 °C)
Rated operational voltage
240 V AC, 3-phase
230 V AC, 3-phase
Resolution
0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating
70 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max
175 % IH
Supply frequency
50/60 Hz
Switching frequency
8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type
AC supply systems with earthed center point
Voltage rating - max
240 V

Motor rating

Assigned motor current IM at 110/120 V, 60 Hz, 150% overload
46 A
Assigned motor current IM at 115 V, 50 Hz, 150% overload
46 A
Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload
46 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload
46 A
Assigned motor current IM at 400 V, 50 Hz, 150% overload
46 A
Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload
46 A
Assigned motor power at 115/120 V, 60 Hz, 1-phase
15 HP
Assigned motor power at 230/240 V, 60 Hz, 1-phase
15 HP
Assigned motor power at 460/480 V, 60 Hz
15 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase
15 HP

Apparent power

Apparent power at 230 V
10.58 kVA
Apparent power at 240 V
11.04 kVA

Braking function

Braking resistance
10 Ω
Braking torque
Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Switch-on threshold for the braking transistor
390 VDC

Control circuit

Number of inputs (analog)
2 (parameterizable, 0 - 10 V DC, 0/4 - 20 mA)
Number of inputs (digital)
4 (parameterizable, 10 - 30 V DC)
Number of outputs (analog)
1
Number of outputs (digital)
1
Number of relay outputs
1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))

Design verification

Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

ETIM for 199428 Interruptores de baja tensión (EC001857)

CaracterísticaTensión de red (EF006780)
Valor200 V
CaracterísticaFrecuencia de la red (EF006783)
Valor50/60 Hz
CaracterísticaNúmero de fases de entrada (EF007117)
Valor3
CaracterísticaNúmero de salidas de fase (EF006998)
Valor3
CaracterísticaFrecuencia máxima de salida (EF007350)
Valor500 Hz
CaracterísticaTensión de salida máx. (EF009560)
Valor250 V
CaracterísticaCorriente de salida nominal I2N (EF009561)
Valor46 A
CaracterísticaPotencia cuadrática máxima entregada. Carga a la tensión nominal de entrada (EF007366)
Valor11 kW
CaracterísticaPotencia de salida máxima en carga lineal a tensión de salida nominal (EF007364)
Valor11 kW
CaracterísticaConsumo de energía (EF000346)
Valor446 W
CaracterísticaTolerancia de frecuencia de potencia simétrica relativa (EF007454)
Valor10 %
CaracterísticaTolerancia de tensión de red simétrica relativa (EF007453)
Valor10 %
CaracterísticaNúmero de salidas analógicas (EF001995)
Valor1
CaracterísticaNúmero de entradas analógicas (EF001994)
Valor2
CaracterísticaNúmero de salidas digitales (EF001993)
Valor1
CaracterísticaNúmero de entradas digitales (EF001992)
Valor4
CaracterísticaCon unidad de control (EF001538)
Valortrue
CaracterísticaUso en el sector industrial permitido (EF007294)
Valortrue
CaracterísticaUso permitido en zonas residenciales y comerciales (EF007295)
Valortrue
CaracterísticaSoporta el protocolo TCP/IP (EF003050)
Valorfalse
CaracterísticaSoporta el protocolo PROFIBUS (EF003052)
Valorfalse
CaracterísticaSoporta el protocolo CAN (EF003053)
Valortrue
CaracterísticaSoporta el protocolo INTERBUS (EF003054)
Valorfalse
CaracterísticaSoporta el protocolo ASI (EF003051)
Valorfalse
CaracterísticaSoporta protocolo KNX (EF003055)
Valorfalse
CaracterísticaSoporta el protocolo Modbus (EF003057)
Valortrue
CaracterísticaSoporta el protocolo de autopista de datos (EF003058)
Valorfalse
CaracterísticaSoporta el protocolo DeviceNet (EF003059)
Valorfalse
CaracterísticaSoporta el protocolo SUCONET (EF003060)
Valorfalse
CaracterísticaSoporta el protocolo LON (EF003017)
Valorfalse
CaracterísticaSoporta el protocolo PROFINET IO (EF007525)
Valorfalse
CaracterísticaSoporta el protocolo PROFINET CBA (EF007524)
Valorfalse
CaracterísticaSoporta el protocolo SERCOS (EF006657)
Valorfalse
CaracterísticaSoporta el protocolo Foundation Fieldbus (EF007522)
Valorfalse
CaracterísticaSoporta el protocolo Ethernet/IP (EF007521)
Valortrue
CaracterísticaSoporta el protocolo AS-Interface Safety at Work (EF007519)
Valorfalse
CaracterísticaSoporta el protocolo DeviceNet Safety (EF007520)
Valorfalse
CaracterísticaSoporta el protocolo de seguridad INTERBUS (EF006662)
Valorfalse
CaracterísticaSoporta el protocolo PROFIsafe (EF007526)
Valorfalse
CaracterísticaSoporta el protocolo SafetyBUS p (EF007527)
Valorfalse
CaracterísticaSoporta protocolo para BACnet (EF011944)
Valorfalse
CaracterísticaSoporta el protocolo para otros sistemas bus (EF003062)
Valortrue
CaracterísticaNúmero de interfaces HW Ethernet industrial (EF003020)
Valor0
CaracterísticaNúmero de interfaces PROFINET (EF006932)
Valor0
CaracterísticaNúmero de interfaces HW RS232 (EF003021)
Valor0
CaracterísticaNúmero de interfaces HW RS422 (EF003022)
Valor0
CaracterísticaNúmero de interfaces HW RS485 (EF003023)
Valor1
CaracterísticaNúmero de interfaces HW en serie TTY (EF003024)
Valor0
CaracterísticaNúmero de interfaces HW USB (EF003025)
Valor0
CaracterísticaNúmero de interfaces HW en paralelo (EF003026)
Valor0
CaracterísticaNúmero de interfaces HW Otras (EF003027)
Valor0
CaracterísticaCon interfaz óptica (EF003028)
Valorfalse
CaracterísticaCon conexión a PC (EF006107)
Valortrue
CaracterísticaResistencia de frenado integrada (EF007293)
Valortrue
CaracterísticaOperación de 4 cuadrantes posible (EF006803)
Valortrue
CaracterísticaTipo de convertidor (EF006978)
ValorU converter
CaracterísticaGrado de protección (IP) (EF005474)
ValorIP66
CaracterísticaGrado de protección (NEMA) (EF011959)
Valor4X
CaracterísticaAltura (EF000040)
Valor360 mm
CaracterísticaAnchura (EF000008)
Valor240 mm
CaracterísticaProfundidad (EF000049)
Valor275 mm

DATASHEET - PDF

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, le agradecemos ese minuto que invierte en dejarnos su opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerle un servicio de todavía mayor calidad.