EATON - MOELLER series DC1-32030FB-A6SOE1 199426 Y7-199426 - Imagen 1

Las imágenes son sólo a título ilustrativo. Por favor, revise la ficha técnica.

DC1-32030FB-A6SOE1 199426 Y7-199426 EATON ELECTRIC DC1-32030FB-A6SOE1

Referencia: DC1-32030FB-A6SOE1

Código: 199426

Número de catálogo: Y7-199426

Fabricante: EATON - MOELLER series

Descripción:

DC1-32030FB-A6SOE1
Eaton DC1 Variable frequency drive, 230 V AC, 3-phase, 30 A, 7.5 kW, IP66/NEMA 4X, Radio interference suppression filter, Brake chopper, 7-digital display assembly, Local controls, Additional PCB protection, UV resistant, FS4
Variador de frecuencia, referencia del grupo de piezas (por ejemplo, DIL): DC1, Tensión nominal de funcionamiento: Ue = 230 V CA, 3 fases, 240 V CA, 3 fases, Tensión de salida con Ve: U2 = 230 V CA, 3 fases, 240 V CA, 3 fases, Tensión de red (50/60Hz): LSN = 200 (-10%) - 240 (+10%) V, corriente nominal de funcionamiento Al 150% de sobrecarga: Ie = 30 A, Nota: Corriente nominal de funcionamiento a una frecuencia de funcionamiento de 6 kHz y una temperatura del aire ambiente de +40 °C, Nota: Ciclo de sobrecarga durante 60 s cada 600 s, Capacidad nominal asignada del motor Nota: Para motores asíncronos trifásicos de cuatro polos con ventilación interna y externa normal con 1500 rpm a 50 Hz y 1800 rpm a 60 Hz , Ciclo de sobrecarga de 60 s cada 600 s, a 230 V, 50 Hz, Potencia nominal asignada 150 % Sobrecarga: P = 7,5 kW, 150 % Sobrecarga: IM = 30 A, Clasificación asignada del motor Nota: a 220 - 240 V, 60 Hz, Potencia nominal asignada 150 % Sobrecarga: P = 10 CV, Potencia asignada del motor 150 % Sobrecarga: IM = 30 A, Grado de protección: IP66/NEMA 4X, Interfaz/bus de campo (incorporado): OP-Bus (RS485)/Modbus RTU, CANopen®, Conexión de bus de campo (opcional): SmartWire-DT, Equipado con: filtro de supresión de interferencias de radio, chopper de freno, conjunto de pantalla digital 7, controles locales, protección PCB adicional, resistente a los rayos UV, tamaño del marco: FS4, Normas: Requisitos generales: IEC/EN 61800-2 , Requisitos EMV: IEC/EN 61800-3, Requisitos de seguridad: IEC/EN 61800-5-1

Categorías:

  • Componentes industriales de baja tensión > Convertidor de frecuencia de menos de 1 kV
  • EATON - MOELLER series > Convertidores de Frecuencia Power XL

Producto nuevo en su embalaje original con todas las garantías y certificaciones de EATON - MOELLER SERIES

  • Más Información
  • ETIM
  • Opiniones
Garantía, reparación y devolución.

Precio unitario: 1.646,55 €

Este precio es por unidad y muestra el valor neto (no incluye impuestos indirectos si son aplicables).

Calcule su precio por cantidad

CantidadPrecio

Plazo estándar: 3 semanas.

  • Estos plazos son una estimación y podrían variar una vez tramitado el pedido del artículo.

VISTOS ANTERIORMENTE

MÁS INFORMACIÓN

Especificaciones generales

Product Name
Eaton DC1 Variable frequency drive
Catalog Number
199426
EAN
4015081978151
Product Length/Depth
275 mm
Product Height
360 mm
Product Width
240 mm
Product Weight
9.5 kg
Certifications
UL Listed
IEC/EN 61800-2
Certified by UL for use in Canada
CUL
IEC/EN61800-5
UL File No.: E172143
UL
UL 508C
RoHS, ISO 9001
UkrSEPRO
RCM
EAC
UL report applies to both US and Canada
CE marking
CE
CSA-C22.2 No. 14
IEC/EN 61800-5-1
UL Category Control No.: NMMS, NMMS7
IEC/EN 61800-3
Catalog Notes
Model Code
DC1-32030FB-A6SOE1

Features & Functions

Features
Parameterization: Keypad
Parameterization: drivesConnect
Parameterization: drivesConnect mobile (App)
Parameterization: Fieldbus
Fitted with:
PC connection
Internal DC link
Brake chopper
Additional PCB protection
Local controls
UV resistance
7-digital display assembly
Radio interference suppression filter
Control unit
Breaking resistance
IGBT inverter
Functions
4-quadrant operation possible

General

Cable length
C3 ≤ 25 m, maximum motor cable length
C2 ≤ 5 m, maximum motor cable length
100 m, screened, maximum permissible cable length
300 m, unscreened, with motor choke, maximum permissible, Motor feeder
200 m, screened, with motor choke, maximum permissible cable length
150 m, unscreened, maximum permissible cable length
Communication interface
SmartWire-DT, optional
CANopen®, built in
Modbus RTU, built in
OP-Bus (RS485), built in
Connection to SmartWire-DT
No
Degree of protection
IP66
NEMA 4X
Electromagnetic compatibility
1st and 2nd environments (according to EN 61800-3)
Frame size
FS4
Mounting position
Vertical
Product category
Variable frequency drives
Product category
Variable frequency drives
Protection
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol
CAN
EtherNet/IP
Other bus systems
MODBUS
Radio interference class
Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Suitable for
Branch circuits, (UL/CSA)

Climatic environmental conditions

Altitude
Max. 4000 m
Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - min
-20 °C
Ambient operating temperature - max
40 °C
Ambient storage temperature - min
-40 °C
Ambient storage temperature - max
60 °C
Climatic proofing
< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Efficiency
97 % (η)
Input current ILN at 150% overload
33.3 A
Leakage current at ground IPE - max
6.9 mA
Mains switch-on frequency
Maximum of one time every 30 seconds
Mains voltage - min
200 V
Mains voltage - max
240 V
Operating mode
PM motors
Sensorless vector control (SLV)
Synchronous reluctance motors
Speed control with slip compensation
BLDC motors
U/f control
Output frequency - min
0 Hz
Output frequency - max
500 Hz
Output voltage (U2)
240 V AC, 3-phase
230 V AC, 3-phase
Overload current IL at 150% overload
45 A
Rated control supply voltage
10 V DC (Us, max. 10 mA)
Rated frequency - min
48 Hz
Rated frequency - max
62 Hz
Rated operational current (Ie)
30 A at 150% overload (at an operating frequency of 6 kHz and an ambient air temperature of +40 °C)
Rated operational voltage
230 V AC, 3-phase
240 V AC, 3-phase
Resolution
0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating
45 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max
175 % IH
Supply frequency
50/60 Hz
Switching frequency
8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type
AC supply systems with earthed center point
Voltage rating - max
240 V

Motor rating

Assigned motor current IM at 110/120 V, 60 Hz, 150% overload
30 A
Assigned motor current IM at 115 V, 50 Hz, 150% overload
30 A
Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload
30 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload
30 A
Assigned motor current IM at 400 V, 50 Hz, 150% overload
30 A
Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload
30 A
Assigned motor power at 115/120 V, 60 Hz, 1-phase
10 HP
Assigned motor power at 230/240 V, 60 Hz, 1-phase
10 HP
Assigned motor power at 460/480 V, 60 Hz
10 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase
10 HP

Apparent power

Apparent power at 230 V
6.9 kVA
Apparent power at 240 V
7.2 kVA

Braking function

Braking resistance
15 Ω
Braking torque
Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Switch-on threshold for the braking transistor
390 VDC

Control circuit

Number of inputs (analog)
2 (parameterizable, 0 - 10 V DC, 0/4 - 20 mA)
Number of inputs (digital)
4 (parameterizable, 10 - 30 V DC)
Number of outputs (analog)
1
Number of outputs (digital)
1
Number of relay outputs
1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))

Design verification

Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

ETIM for 199426 Interruptores de baja tensión (EC001857)

CaracterísticaTensión de red (EF006780)
Valor200 V
CaracterísticaFrecuencia de la red (EF006783)
Valor50/60 Hz
CaracterísticaNúmero de fases de entrada (EF007117)
Valor3
CaracterísticaNúmero de salidas de fase (EF006998)
Valor3
CaracterísticaFrecuencia máxima de salida (EF007350)
Valor500 Hz
CaracterísticaTensión de salida máx. (EF009560)
Valor250 V
CaracterísticaCorriente de salida nominal I2N (EF009561)
Valor30 A
CaracterísticaPotencia cuadrática máxima entregada. Carga a la tensión nominal de entrada (EF007366)
Valor7.5 kW
CaracterísticaPotencia de salida máxima en carga lineal a tensión de salida nominal (EF007364)
Valor7.5 kW
CaracterísticaConsumo de energía (EF000346)
Valor304 W
CaracterísticaTolerancia de frecuencia de potencia simétrica relativa (EF007454)
Valor10 %
CaracterísticaTolerancia de tensión de red simétrica relativa (EF007453)
Valor10 %
CaracterísticaNúmero de salidas analógicas (EF001995)
Valor1
CaracterísticaNúmero de entradas analógicas (EF001994)
Valor2
CaracterísticaNúmero de salidas digitales (EF001993)
Valor1
CaracterísticaNúmero de entradas digitales (EF001992)
Valor4
CaracterísticaCon unidad de control (EF001538)
ValorSí
CaracterísticaUso en el sector industrial permitido (EF007294)
ValorSí
CaracterísticaUso permitido en zonas residenciales y comerciales (EF007295)
ValorSí
CaracterísticaSoporta el protocolo TCP/IP (EF003050)
ValorNo
CaracterísticaSoporta el protocolo PROFIBUS (EF003052)
ValorNo
CaracterísticaSoporta el protocolo CAN (EF003053)
ValorSí
CaracterísticaSoporta el protocolo INTERBUS (EF003054)
ValorNo
CaracterísticaSoporta el protocolo ASI (EF003051)
ValorNo
CaracterísticaSoporta protocolo KNX (EF003055)
ValorNo
CaracterísticaSoporta el protocolo Modbus (EF003057)
ValorSí
CaracterísticaSoporta el protocolo de autopista de datos (EF003058)
ValorNo
CaracterísticaSoporta el protocolo DeviceNet (EF003059)
ValorNo
CaracterísticaSoporta el protocolo SUCONET (EF003060)
ValorNo
CaracterísticaSoporta el protocolo LON (EF003017)
ValorNo
CaracterísticaSoporta el protocolo PROFINET IO (EF007525)
ValorNo
CaracterísticaSoporta el protocolo PROFINET CBA (EF007524)
ValorNo
CaracterísticaSoporta el protocolo SERCOS (EF006657)
ValorNo
CaracterísticaSoporta el protocolo Foundation Fieldbus (EF007522)
ValorNo
CaracterísticaSoporta el protocolo Ethernet/IP (EF007521)
ValorSí
CaracterísticaSoporta el protocolo AS-Interface Safety at Work (EF007519)
ValorNo
CaracterísticaSoporta el protocolo DeviceNet Safety (EF007520)
ValorNo
CaracterísticaSoporta el protocolo de seguridad INTERBUS (EF006662)
ValorNo
CaracterísticaSoporta el protocolo PROFIsafe (EF007526)
ValorNo
CaracterísticaSoporta el protocolo SafetyBUS p (EF007527)
ValorNo
CaracterísticaSoporta protocolo para BACnet (EF011944)
ValorNo
CaracterísticaSoporta el protocolo para otros sistemas bus (EF003062)
ValorSí
CaracterísticaNúmero de interfaces HW Ethernet industrial (EF003020)
Valor0
CaracterísticaNúmero de interfaces PROFINET (EF006932)
Valor0
CaracterísticaNúmero de interfaces HW RS232 (EF003021)
Valor0
CaracterísticaNúmero de interfaces HW RS422 (EF003022)
Valor0
CaracterísticaNúmero de interfaces HW RS485 (EF003023)
Valor1
CaracterísticaNúmero de interfaces HW en serie TTY (EF003024)
Valor0
CaracterísticaNúmero de interfaces HW USB (EF003025)
Valor0
CaracterísticaNúmero de interfaces HW en paralelo (EF003026)
Valor0
CaracterísticaNúmero de interfaces HW Otras (EF003027)
Valor0
CaracterísticaCon interfaz óptica (EF003028)
ValorNo
CaracterísticaCon conexión a PC (EF006107)
ValorSí
CaracterísticaResistencia de frenado integrada (EF007293)
ValorSí
CaracterísticaOperación de 4 cuadrantes posible (EF006803)
ValorSí
CaracterísticaTipo de convertidor (EF006978)
ValorConvertidor U
CaracterísticaGrado de protección (IP) (EF005474)
ValorIP66
CaracterísticaGrado de protección (NEMA) (EF011959)
Valor4X
CaracterísticaAltura (EF000040)
Valor360 mm
CaracterísticaAnchura (EF000008)
Valor240 mm
CaracterísticaProfundidad (EF000049)
Valor275 mm

DATASHEET - PDF

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, le agradecemos ese minuto que invierte en dejarnos su opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerle un servicio de todavía mayor calidad.